Bio-inspired robotic manta ray powered by ionic polymer–metal composite artificial muscles

The manta ray (Manta birostris) is the largest species of rays that demonstrates excellent swimming capabilities via large-amplitude flapping of its pectoral fins. In this article, we present a bio-inspired robotic manta ray using ionic polymer–metal composite (IPMC) as artificial muscles to mimic the swimming behavior of the manta ray. The robot utilizes two artificial pectoral fins to generate undulatory flapping motions, which produce thrust for the robot. Each pectoral fin consists of an IPMC muscle in the leading edge and a passive polydimethylsiloxane membrane in the trailing edge. When the IPMC is actuated, the passive polydimethylsiloxane membrane follows the bending of the leading edge with a phase delay, which leads to an undulatory flapping motion on the fin. Characterization of the pectoral fin has shown that the fin can generate flapping motions with up to 100% tip deflection and 40° twist angle. To test the free-swimming performance of the robot, a light and compact on-board control unit with a lithium ion polymer battery has been developed. The experimental results have shown that the robot can swim at 0.067 BL/s with portable power consumption of under 2.5 W.

[1]  Shuxiang Guo,et al.  A new type of fish-like underwater microrobot , 2003 .

[2]  Xiaobo Tan,et al.  Monolithic fabrication of ionic polymer–metal composite actuators capable of complex deformation , 2010 .

[3]  A Biologically Inspired Ray-like Underwater Robot with Electroactive Polymer Pectoral Fins , 2004 .

[4]  Y. H. Kim,et al.  Performance enhancement of IPMC actuator by plasma surface treatment , 2007 .

[5]  Sang Jun Lee,et al.  A new fabrication method for IPMC actuators and application to artificial fingers , 2006 .

[6]  P. K. Fung,et al.  A novel fabrication of ionic polymer-metal composites (IPMC) actuator with silver nano-powders , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[7]  K. Kim,et al.  Ionic polymer-metal composites: I. Fundamentals , 2001 .

[8]  M. Shahinpoor.  Conceptual design, kinematics and dynamics of swimming robotic structures using ionic polymeric gel muscles , 1992 .

[9]  L. Rosenberger,et al.  Pectoral fin locomotion in batoid fishes: undulation versus oscillation. , 2001, The Journal of experimental biology.

[10]  Mohsen Shahinpoor,et al.  Noiseless propulsion for swimming robotic structures using polyelectrolyte ion-exchange membrane , 1996, Smart Structures.

[11]  Xiaobo Tan,et al.  A Control-Oriented and Physics-Based Model for Ionic Polymer--Metal Composite Actuators , 2008, IEEE/ASME Transactions on Mechatronics.

[12]  Hilary Bart-Smith,et al.  Investigating the Thrust Production of a Myliobatoid-Inspired Oscillating Wing , 2008 .

[13]  Keith Moored,et al.  Investigation of clustered actuation in tensegrity structures , 2009 .

[14]  Chunlin Zhou,et al.  Design and Locomotion Control of a Biomimetic Underwater Vehicle With Fin Propulsion , 2012, IEEE/ASME Transactions on Mechatronics.

[15]  K. Kim,et al.  Ionic polymer–metal composites: IV. Industrial and medical applications , 2005 .

[16]  Sia Nemat-Nassera,et al.  Micromechanics of actuation of ionic polymer-metal composites , 2014 .

[17]  Y. Bar-Cohen.  Electroactive Polymers as Artificial Muscles: Capabilities, Potentials and Challenges , 2000 .

[18]  Kam K. Leang,et al.  A Twistable Ionic Polymer-Metal Composite Artificial Muscle for Marine Applications , 2011 .

[19]  K. Abhishek.  An Autonomous Robotic Fish for Mobile Sensing , 2014 .

[20]  Tae I. Um,et al.  A novel fabrication of ionic polymer–metal composite membrane actuator capable of 3-dimensional kinematic motions , 2011 .

[21]  Kathy Potosnak,et al.  Conceptual design , 1999, CHI Extended Abstracts.

[22]  Sia Nemat-Nassera,et al.  Electromechanical response of ionic polymer-metal composites , 2000 .

[23]  K. Kim,et al.  A novel method of manufacturing three-dimensional ionic polymer–metal composites (IPMCs) biomimetic sensors, actuators and artificial muscles , 2002 .

[24]  Mohsen Shahinpoor,et al.  Ionic polymer-metal composites as multifunctional materials , 2003 .

[25]  K. Kim,et al.  Ionic polymer–metal composites: II. Manufacturing techniques , 2003 .

[26]  Jian Li,et al.  A micro biomimetic manta ray robot fish actuated by SMA , 2009, 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO).