Large-area preparation strategy and anti-erosion mechanism for morphology-material coupled biomimetic anti-erosion functional surface

[1]  Shubham Sharma,et al.  Experimental investigation on rotating domain wear of hydrodynamic machine due to particulate flow , 2022, Powder Technology.

[2]  Junqiu Zhang,et al.  An innovative strategy of anti-erosion: Combining bionic morphology and bionic arrangement , 2022, Powder Technology.

[3]  Xiumei Liu,et al.  Hydrodynamic characteristics and optimization design of a bio-inspired anti-erosion structure for a regulating valve core , 2022, Flow Measurement and Instrumentation.

[4]  Y.G. Zheng,et al.  Effect of groove depth on the slurry erosion of V-shaped grooved surfaces , 2022, Wear.

[5]  Baochang Liu,et al.  Erosion wear characteristics of cemented carbide for mud pulser rotor , 2021 .

[6]  Jianjian Wang,et al.  Study on ammonia gas high temperature corrosion coupled erosion wear characteristics of circulating fluidized bed boiler , 2021, Engineering Failure Analysis.

[7]  D. Das,et al.  Erosion behaviour of platinum aluminide bond coat on directionally solidified CM247 and AM1 single crystal superalloys , 2021, Surface and Coatings Technology.

[8]  A. Levy,et al.  Surface erosion due to particle-surface interactions - A review , 2021, Powder Technology.

[9]  Yuan Zheng,et al.  Microstructure and cavitation erosion behavior of HVOF sprayed ceramic-metal composite coatings for application in hydro-turbines , 2021 .

[10]  L. Ren,et al.  Optimum Anti-erosion Structures and Anti-erosion Mechanism for Rotatory Samples Inspired by Scorpion Armor of Parabuthus transvaalicus , 2021 .

[11]  H. Hu,et al.  Effect of groove microstructure on slurry erosion in the liquid-solid two-phase flow , 2020 .

[12]  Haifeng Wang,et al.  Remaining Useful Life Estimation of Structure Systems Under the Influence of Multiple Causes: Subsea Pipelines as a Case Study , 2020, IEEE Transactions on Industrial Electronics.

[13]  He Xu,et al.  A review of biomimetic research for erosion wear resistance , 2020 .

[14]  L. Ren,et al.  Progress in Bio-inspired Anti-solid Particle Erosion Materials: Learning from Nature but Going beyond Nature , 2020 .

[15]  Jianfeng Li,et al.  Erosion and corrosion behavior of shrouded plasma sprayed Cr3C2-NiCr coating , 2020 .

[16]  Aibing Yu,et al.  CFD-DEM modelling and simulation of pneumatic conveying: A review , 2020 .

[17]  Z. Shi,et al.  Ultrasonic surface treatment for improving wind-blown sand erosion resistance of cementitious materials , 2020 .

[18]  Shaolin Li,et al.  Computational method for the analysis of erosion-induced stress and damage in thermal barrier coatings , 2019 .

[19]  Youhong Sun,et al.  A Bionic Study on the Anti-erosion Mechanism of Laudakia stoliczkana: Experimental and Numerical Aspects , 2019, Journal of Bionic Engineering.

[20]  Haihang Wang,et al.  Design of a Bio-Inspired Anti-Erosion Structure for a Water Hydraulic Valve Core: An Experimental Study , 2019, Biomimetics.

[21]  L. Girelli,et al.  Effect of heat treatment on microstructure and erosion resistance of white cast irons for slurry pumping applications , 2019, Wear.

[22]  R. Wood,et al.  Cavitation erosion performance of CrAlYN/CrN nanoscale multilayer coatings deposited on Ti6Al4V by HIPIMS , 2019, Journal of Alloys and Compounds.

[23]  A. Jafari,et al.  Investigation of parameters influencing erosive wear using DEM , 2019, Friction.

[24]  V. Prasad,et al.  Cracking of Erosion Strip of Main Rotor Blade of a Military Helicopter , 2019, Journal of Failure Analysis and Prevention.

[25]  Ho-Young Kim,et al.  Anti-erosive mechanism of a grooved surface against impact of particle-laden flow , 2018, Wear.

[26]  Yu. A. Petrov,et al.  Experimental and theoretical analysis of solid particle erosion of a steel compressor blade based on incubation time concept , 2018 .

[27]  Junqiu Zhang,et al.  The Ingenious Structure of Scorpion Armor Inspires Sand-Resistant Surfaces , 2017, Tribology Letters.

[28]  Shichao Niu,et al.  The effect of the micro-structures on the scorpion surface for improving the anti-erosion performance , 2017 .

[29]  Yu Tian,et al.  Gas–Solid Erosive Wear of Biomimetic Pattern Surface Inspired from Plant , 2017 .

[30]  W. Baumgartner,et al.  Neutral glycans from sandfish skin can reduce friction of polymers , 2016, Journal of The Royal Society Interface.

[31]  Shaohua Dong,et al.  Effect of the gas–solid two-phase flow velocity on elbow erosion , 2015 .

[32]  Siamack A. Shirazi,et al.  A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications , 2014 .

[33]  L. Ren,et al.  Erosion wear experiments and simulation analysis on bionic anti-erosion sample , 2014 .

[34]  Luquan Ren,et al.  Particle Erosion Resistance of Bionic Samples Inspired from Skin Structure of Desert Lizard, Laudakin stoliczkana , 2012 .

[35]  Luquan Ren,et al.  Erosion resistance of bionic functional surfaces inspired from desert scorpions. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[36]  O. Gohardani.  Impact of erosion testing aspects on current and future flight conditions , 2011 .

[37]  Agnes Weth,et al.  The sandfish’s skin: Morphology, chemistry and reconstruction , 2007 .

[38]  A. Krella,et al.  Effect of annealing temperature on slurry erosion resistance of ferritic X10CrAlSi18 steel , 2021 .

[39]  Ronald E. Vieira,et al.  Experimental and computational study of erosion in elbows due to sand particles in air flow , 2016 .