The Effect of PCBM Dimerization on the Performance of Bulk Heterojunction Solar Cells

Increasing the lifetime of polymer based organic solar cells is still a major challenge. Here, the photostability of bulk heterojunction solar cells based on the polymer poly[4,4′-bis(2-ethylhexyl)dithieno[3,2-b:2′,3′-d]silole)-2,6-diyl-alt-[2,5-bis(3-tetradecylthiophen-2-yl)thiazole[5,4-d]thiazole)-1,8-diyl] (PDTSTzTz) and the fullerene [6,6]-phenyl-C61-butyric acid methyl ester (PC60BM) under inert atmosphere is investigated. Correlation of electrical measurements on complete devices and UV-vis absorption measurements as well as high-performance liquid chromatography (HPLC) analysis on the active materials reveals that photodimerization of PC60BM is responsible for the observed degradation. Simulation of the electrical device parameters shows that this dimerization results in a significant reduction of the charge carrier mobility. Both the dimerization and the associated device performance loss turn out to be reversible upon annealing. BisPC60BM, the bis-substituted analog of PC60BM, is shown to be resistant towards light exposure, which in turn enables the manufacture of photostable PDTSTzTz:bisPC60BM solar cells.

[1]  Ying Wang,et al.  Photoinduced Polymerization of Solid C60 Films , 1993, Science.

[2]  S. Beaupré,et al.  High Efficiency Polymer Solar Cells with Long Operating Lifetimes , 2011 .

[3]  E. Kymakis,et al.  Plasmonic organic photovoltaic devices with graphene based buffer layers for stability and efficiency enhancement. , 2013, Nanoscale.

[4]  J. Segura,et al.  [60]Fullerene dimers , 2000 .

[5]  Jia Wang,et al.  Photochemical Transformation of Fullerenes , 2013 .

[6]  A. M. Rao,et al.  Photoinduced polymerization of solid C70 films , 1994 .

[7]  Christoph J. Brabec,et al.  Physics of organic bulk heterojunction devices for photovoltaic applications , 2006 .

[8]  Christoph J. Brabec,et al.  Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime , 2008 .

[9]  Adams,et al.  Polymerized C60 studied by first-principles molecular dynamics. , 1994, Physical review. B, Condensed matter.

[10]  Suren A. Gevorgyan,et al.  Degradation patterns in water and oxygen of an inverted polymer solar cell. , 2010, Journal of the American Chemical Society.

[11]  A. M. Rao,et al.  IR spectra of photopolymerized C60 films. Experimental and density functional theory study. , 2006, The journal of physical chemistry. B.

[12]  George D. Spyropoulos,et al.  Enhancement of photo/thermal stability of organic bulk heterojunction photovoltaic devices via gold nanoparticles doping of the active layer. , 2012, Nanoscale.

[13]  T. Wågberg,et al.  Photo-induced and resist-free imprint patterning of fullerene materials for use in functional electronics. , 2009, Journal of the American Chemical Society.

[14]  A. M. Rao,et al.  Photochemical transformation of C60 and C70 films , 1995 .

[15]  A. M. Rao,et al.  Reaction mechanism for the photopolymerization of solid fullerene C60 , 1993 .

[16]  G. Dennler,et al.  Bulk heterojunction solar cells with thick active layers and high fill factors enabled by a bithiophene-co-thiazolothiazole push-pull copolymer , 2011 .

[17]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[18]  A. Salleo,et al.  The Mechanism of Burn‐in Loss in a High Efficiency Polymer Solar Cell , 2012, Advanced materials.

[19]  P. Eklund,et al.  Photo-dimerization kinetics in solid C60 films , 1993 .

[20]  F. Zhang,et al.  Improvement of both efficiency and working lifetime in organic photovoltaic devices by using bathophenanthroline/tin(IV) phthalocyanine dichloride as bilayer exciton blocking layers , 2012 .

[21]  Jan C. Hummelen,et al.  Stability issues of conjugated polymer/fullerene solar cells from a chemical viewpoint , 2001, SPIE Optics + Photonics.