Towards circular economy implementation in manufacturing systems using a multi-method simulation approach to link design and business strategy

The recent circular economy movement has raised awareness and interest about untapped environmental and economic potential in the manufacturing industry. One of the crucial aspects in the implementation of circular or closed-loop manufacturing approach is the design of circular products. While it is obvious that three post-use strategies, i.e., reuse, remanufacturing, and recycling, are highly relevant to achieve loop closure, it is enormously challenging to choose “the right” strategy (if at all) during the early design stage and especially at the single component level. One reason is that economic and environmental impacts of adapting these strategies are not explicit as they vary depending on the chosen business model and associated supply chains. In this scenario, decision support is essential to motivate adaptation of regenerative design strategies. The main purpose of this paper is to provide reliable decision support at the intersection of multiple lifecycle design and business models in the circular economy context to identify effects on cost and CO2 emissions. The development of this work consists of a systematic method to quantify design effort for different circular design options through a multi-method simulation approach. The simulation model combines an agent-based product architecture and a discrete event closed-loop supply chain model. Feasibility of the model is tested using a case of a washing machine provided by Gorenje d.d. Firstly, design efforts for reuse, remanufacturing, and recycling are quantified. Secondly, cost and emissions of different design options are explored with different business model configurations. Finally, an optimization experiment is run to identify the most cost-effective combination of reused, remanufactured, and recycled components for a business model chosen on the basis of the explorative study results.

[1]  S. Takakuwa,et al.  The Use Of Simulation In Activity-based Costing For Flexible Manufacturing Systems , 1997, Winter Simulation Conference Proceedings,.

[2]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[3]  Y. Asiedu,et al.  Product life cycle cost analysis: State of the art review , 1998 .

[4]  Jian S. Dai,et al.  Product Cost Estimation: Technique Classification and Methodology Review , 2006 .

[5]  Peer-Olaf Siebers,et al.  Discrete-event simulation is dead, long live agent-based simulation! , 2010, J. Simulation.

[6]  A. Kriwet,et al.  Disassembly-Oriented Assessment Methodology to Support Design for Recycling , 1994 .

[7]  Michael Lieder,et al.  Multi-method simulation based tool to evaluate economic and environmental performance of circular product systems , 2016 .

[8]  Nicolas Tchertchian,et al.  Influence of the Multiple Life Cycles on the Environmental Impact of a Product , 2009 .

[9]  K. N. Kendall,et al.  Discrete event simulation and cost analysis for manufacturing optimisation of an automotive LCM component , 1998 .

[10]  P. Gu,et al.  Product modularization for life cycle engineering , 1999 .

[11]  Y. Shimomura,et al.  Product life cycle design based on product life control , 2003, 2003 EcoDesign 3rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing.

[12]  Jagjit Singh Srai,et al.  Special issue on sustainable manufacturing and the key enabling technologies , 2012 .

[13]  Milad Avazbeigi,et al.  A material selection methodology and expert system for sustainable product design , 2011 .

[14]  Dzuraidah Abd. Wahab,et al.  Multiple generation life-cycles for product sustainability: the way forward , 2015 .

[15]  Gregory A. Norris,et al.  Integrating life cycle cost analysis and LCA , 2001 .

[16]  N. Bocken,et al.  Product design and business model strategies for a circular economy , 2016 .

[17]  Trevor A Spedding,et al.  Application of discrete event simulation to the activity based costing of manufacturing systems , 1999 .

[18]  Jun Wang,et al.  Low-carbon conceptual design based on product life cycle assessment , 2015 .

[19]  G. Boothroyd,et al.  Design for Disassembly and the Environment , 1996 .

[20]  S. G. Lee,et al.  A Multi-Objective Methodology for Evaluating Product End-of-Life Options and Disassembly , 2001 .

[21]  Cornel Mihai Nicolescu,et al.  Performance analysis of the closed loop supply chain , 2012 .

[22]  Jun Wu,et al.  Research on eco-balance with LCA and LCC for mechanical product design , 2016 .

[23]  Andrew Y. C. Nee,et al.  Environmental life cycle cost analysis of products , 2001 .

[24]  Michael Lieder,et al.  Towards Circular Economy implementation: an agent-based simulation approach for business model changes , 2017, Autonomous Agents and Multi-Agent Systems.

[25]  Fiona Charnley,et al.  A Conceptual Framework for Circular Design , 2016 .

[26]  C. Ou-Yang,et al.  Developing an integrated framework for feature-based early manufacturing cost estimation , 1997 .

[27]  James F. C. Windmill,et al.  Design for remanufacture: a literature review and future research needs , 2011 .

[28]  A. Borshchev,et al.  From System Dynamics and Discrete Event to Practical Agent Based Modeling : Reasons , Techniques , Tools , 2004 .

[29]  Peter Krajnik,et al.  Resource Conservative Manufacturing: an essential change in business and technology paradigm for sustainable manufacturing , 2013 .

[30]  Yoshiki Shimomura,et al.  Product Life Cycle Design based on Product Life Control , 2003 .

[31]  A. Rashid,et al.  Towards circular economy implementation: a comprehensive review in context of manufacturing industry , 2016 .

[32]  Andrew Y. C. Nee,et al.  Design for Disassembly for Remanufacturing: Methodology and Technology , 2014 .