论文信息 - Design of PDC controller based on T-S fuzzy model for magnetic bearing of high-speed motors

Design of PDC controller based on T-S fuzzy model for magnetic bearing of high-speed motors

Magnetic bearings can not only solve the bearing wear and life problems but also reduce the loss and noise of bearings. However, the strong non-linear and uncertainty of parameter of the magnetic bearings make the traditional PID controller difficult to ensure its long-term and stable operation. Based on the T-S fuzzy model, this paper presents a design method of magnetic bearing parallel-distributed compensation (PDC) controller for high speed motors. Firstly, linear local Takagi-Sugeno (T-S)-fuzzy model for magnetic bearing subsystem and nonlinear model for the overall system is deduced. Then the fuzzy state feedback nonlinear controller for the overall system is obtained via parallel-distributed compensation (PDC) approach and judging the stability of designed controller. Finally, the validity of controller design is verified by means of the field-circuit coupling analysis. The simulation results show that the proposed PDC controller has better performance than the conventional PID controller.

Fengxiang Wang | Dapeng Wang

[1] Wei Sha,et al. Modelling the correlation between processing parameters and properties in titanium alloys using artificial neural network , 2000 .

[2] Zhou Shi-yuan. A Design Method for the Magnetic Bearing Control System With Multi-objective Requirements via Linear Matrix Inequality Approach , 2007 .

[3] Zhou Hong-ying. A Design Method for Nonlinear System PDC Controller Based on LMI , 2003 .

[4] Shyh-Leh Chen,et al. Experimental validation of a current-controlled three-pole magnetic rotor-bearing system , 2005, IEEE Transactions on Magnetics.

[5] Cliff T. Ragsdale,et al. Combining a neural network with a genetic algorithm for process parameter optimization , 2000 .

[6] Jiang Jing-ping. NONLINEAR PD STATE FEEDBACK CONTROLLER FOR ELECTRICAL DRIVE SYSTEMS BASED ON T-S FUZZY MODEL , 2004 .

[7] Wenpeng Zheng,et al. Design features of high speed PM machines , 2003, Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003..