Modeling of the diffusion phenomenon in a lithium-ion cell using frequency or time domain identification

Abstract The paper deals with the identification of a graphite/LiFePO 4 Li-Ion cell, the model of which is based on an electric equivalent circuit. The paper focuses on the choice of the model used to represent the diffusion phenomena and on the parameters identification method. For this goal, two main models have been compared: a constant phase element model (CPE) and an hyperbolic tangent model (Tanh). These two models have been identified either using a frequency and a time domain method. The validity and accuracy of the model have been evaluated over a NEDC driving cycle.

[1]  Javier Lario Garcia,et al.  Constant-phase element identification in conductivity sensors using a single square wave , 2006 .

[2]  A. Salkind,et al.  Dynamic characterization of small lead-acid cells , 2001 .

[3]  Ralph E. White,et al.  Review of Models for Predicting the Cycling Performance of Lithium Ion Batteries , 2006 .

[4]  A. Eddahech,et al.  Ageing monitoring of lithium-ion cell during power cycling tests , 2011, Microelectron. Reliab..

[5]  Guy Friedrich,et al.  Modeling diffusive phenomena using non integer derivatives: Application NiMH batteries , 2004 .

[6]  Matthieu Dubarry,et al.  From single cell model to battery pack simulation for Li-ion batteries , 2009 .

[7]  S. Pélissier,et al.  Frequency and Temporal Identification of a Li-ion Polymer Battery Model Using Fractional Impedance , 2008 .

[8]  José António Tenreiro Machado,et al.  Fractional differentiation and its applications I , 2013, Comput. Math. Appl..

[9]  Henk Jan Bergveld,et al.  Electronic network modelling of rechargeable NiCd cells and its application to the design of battery management systems , 1999 .

[10]  Alain Oustaloup,et al.  A fractional order model for lead-acid battery crankability estimation , 2010 .

[11]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2. Modeling and identification , 2004 .

[12]  Jie Yan,et al.  Effect of state of charge on impedance spectrum of sealed Ni–MH cells , 1999 .

[13]  J. Diard,et al.  Numerical solution of coupled systems of ordinary and partial differential equations. Application to the study of electrochemical insertion reactions by linear sweep voltammetry , 2001 .

[14]  D. Sauer,et al.  Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling , 2011 .

[15]  K. B. Oldham,et al.  The Fractional Calculus: Theory and Applications of Differentiation and Integration to Arbitrary Order , 1974 .

[16]  Marc Thele,et al.  Development of a voltage-behavior model for NiMH batteries using an impedance-based modeling concept , 2008 .

[17]  A. A. Moya,et al.  Simulation of nonstationary diffusion-migration processes in electrochemical cells using the network method , 1996 .

[18]  C. Forgez,et al.  Modeling diffusive phenomena using non integer derivatives , 2004 .

[19]  E. Karden,et al.  Dynamic modelling of lead/acid batteries using impedance spectroscopy for parameter identification , 1997 .

[20]  D. Wheeler,et al.  Modeling of lithium-ion batteries , 2003 .

[21]  Kenneth R. Bundy,et al.  An electrochemical impedance spectroscopy method for prediction of the state of charge of a nickel-metal hydride battery at open circuit and during discharge , 1998 .

[22]  Guy Friedrich,et al.  Modelling Ni-mH battery using Cauer and Foster structures , 2006 .

[23]  Richard P. Buck,et al.  Transmission line equivalent circuit models for electrochemical impedances , 1981 .

[24]  Allen J. Bard,et al.  Electrochemical Methods: Fundamentals and Applications , 1980 .

[25]  Valerie H. Johnson,et al.  Battery performance models in ADVISOR , 2002 .

[26]  B. Wu,et al.  Resistive companion battery modeling for electric circuit simulations , 2001 .

[27]  Stephen Yurkovich,et al.  Electro-thermal battery model identification for automotive applications , 2011 .

[28]  S. Rodrigues,et al.  A review of state-of-charge indication of batteries by means of a.c. impedance measurements , 2000 .

[29]  Ralph E. White,et al.  Mathematical modeling of lithium-ion and nickel battery systems , 2002 .

[30]  F. Huet.  A review of impedance measurements for determination of the state-of-charge or state-of-health of secondary batteries , 1998 .

[31]  José Horno,et al.  Digital simulation of electrochemical processes by the network approach , 1993 .