How Soft Polymers Cope with Cracks and Notches

Soft matter denotes a large category of materials showing unique properties, resulting from a low elastic modulus, a very high deformation capability, time-dependent mechanical behavior, and a peculiar mechanics of damage and fracture. The flaw tolerance, commonly understood as the ability of a given material to withstand external loading in the presence of a defect, is certainly one of the most noticeable attributes. This feature results from a complex and highly entangled microstructure, where the mechanical response to external loading is mainly governed by entropic-related effects. In the present paper, the flaw tolerance of soft elastomeric polymers, subjected to large deformation, is investigated experimentally. In particular, we consider the tensile response of thin plates made of different silicone rubbers, containing defects of various severity at different scales. Full-field strain maps are acquired by means of the Digital Image Correlation (DIC) technique. The experimental results are interpreted by accounting for the blunting of the defects due to large deformation in the material. The effect of blunting is interpreted in terms of reduction of the stress concentration factor generated by the defect, and failure is compared to that of traditional crystalline brittle materials.

[1]  Thierry Biben,et al.  Strain-Induced Crystallization of Natural Rubber and Cross-Link Densities Heterogeneities , 2014 .

[2]  Kumbakonam R. Rajagopal,et al.  A study of strain-induced crystallization of polymers , 2001 .

[3]  C. M. Roland.  Mechanical Behavior of Rubber at High Strain Rates , 2006 .

[4]  Lallit Anand,et al.  Progressive damage and rupture in polymers , 2017, 1707.07736.

[5]  P. Flory.  Principles of polymer chemistry , 1953 .

[6]  M. Buehler,et al.  Defect-Tolerant Bioinspired Hierarchical Composites: Simulation and Experiment. , 2015, ACS biomaterials science & engineering.

[7]  Markus J. Buehler,et al.  Multiscale mechanics of biological and biologically inspired materials and structures , 2010 .

[8]  Andrea Carpinteri,et al.  Defect sensitivity of highly deformable polymeric materials with different intrinsic qualities at various strain rates , 2018 .

[9]  Justin A. Blaber,et al.  Ncorr: Open-Source 2D Digital Image Correlation Matlab Software , 2015, Experimental Mechanics.

[10]  Zhigang Suo,et al.  Fatigue of double-network hydrogels , 2017 .

[11]  Shinzo Kohjiya,et al.  Molecular orientation and stress relaxation during strain-induced crystallization of vulcanized natural rubber , 2010 .

[12]  Andrea Carpinteri,et al.  Notch effect in highly deformable material sheets , 2016 .

[13]  R. Roark,et al.  Roark's Formulas for Stress and Strain , 2020 .

[14]  William C. Sweatt,et al.  Camera System Resolution and its Influence on Digital Image Correlation , 2015 .

[15]  Masao Doi,et al.  Soft Matter Physics , 2013 .

[16]  Shi Zhifei,et al.  Stress-strain field near the notch tip of a rubber sheet , 1995 .

[17]  Wen Yang,et al.  On the tear resistance of skin , 2015, Nature Communications.

[18]  L. Treloar,et al.  The elasticity and related properties of rubbers , 1973 .

[19]  A. Jagota,et al.  Crack blunting and the strength of soft elastic solids , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[20]  S. Suresh,et al.  Cell and molecular mechanics of biological materials , 2003, Nature materials.

[21]  M. Grédiac,et al.  Assessment of Digital Image Correlation Measurement Errors: Methodology and Results , 2009 .

[22]  W. Kuhn,et al.  Dependence of the average transversal on the longitudinal dimensions of statistical coils formed by chain molecules , 1946 .

[23]  Chung-Yuen Hui,et al.  Crack tip fields in soft elastic solids subjected to large quasi-static deformation — A review , 2015 .

[24]  Tada Hiroshi,et al.  A note on the finite width corrections to the stress intensity factor , 1971 .

[25]  Lallit Anand,et al.  A theory for fracture of polymeric gels , 2018, Journal of the Mechanics and Physics of Solids.

[26]  Gerhard A. Holzapfel,et al.  Nonlinear Solid Mechanics: A Continuum Approach for Engineering Science , 2000 .

[27]  T. Tang,et al.  A rate-dependent damage model for elastomers at large strain , 2016 .

[28]  Zhigang Suo,et al.  Flaw sensitivity of highly stretchable materials , 2017 .

[29]  P. Gennes.  Reptation of a Polymer Chain in the Presence of Fixed Obstacles , 1971 .

[30]  Oliver A. Shergold,et al.  Experimental investigation into the deep penetration of soft solids by sharp and blunt punches, with application to the piercing of skin. , 2005, Journal of biomechanical engineering.

[31]  Andrea Carpinteri,et al.  Defect tolerance at various strain rates in elastomeric materials: An experimental investigation , 2017 .

[32]  C. Inglis.  Stresses in a plate due to the presence of cracks and sharp corners , 1913 .

[33]  J. Fineberg,et al.  Failing softly: a fracture theory of highly-deformable materials. , 2015, Soft matter.

[34]  Hugh A. Bruck,et al.  The role of mechanics in biological and biologically inspired materials , 2002 .

[35]  Yonggang Huang,et al.  Materials and Mechanics for Stretchable Electronics , 2010, Science.

[36]  Bonn,et al.  Delayed fracture of an inhomogeneous soft solid , 1998, Science.

[37]  Huajian Gao,et al.  Materials become insensitive to flaws at nanoscale: Lessons from nature , 2003, Proceedings of the National Academy of Sciences of the United States of America.

[38]  Mary C. Boyce,et al.  Constitutive modeling of the large strain time-dependent behavior of elastomers , 1998 .