Processing and mechanical properties of organic filler–polypropylene composites

The addition of organic fillers into thermoplastic polymers is an interesting issue, which has had growing consideration and experimentation during the last years. It can give rise to several advantages. First, the cost of these fillers is usually very low. Also, the organic fillers are biodegradable (thus contributing to an improved environmental impact), and finally, some mechanical and thermomechanical properties can be enhanced. In this study, the effect of the addition of different organic fillers on the mechanical properties and processability of an extrusion-grade polypropylene were investigated. The organic fillers came from natural sources (wood, kenaf, and sago) and were compared to short glass fibers, a widely used inorganic filler. The organic fillers caused enhancements in the rigidity and thermomechanical resistance of the matrix in a way that was rather similar to the one observed for the inorganic filler. A reduction in impact strength was observed for both types of fillers. The use of an adhesion promoter could improve their behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1906–1913, 2005

[1]  F. M. B. Coutinho,et al.  Polypropylene–wood fiber composites: Effect of treatment and mixing conditions on mechanical properties , 1997 .

[2]  U. Ishiaku,et al.  Effect of starch predrying on the mechanical properties of starch/poly(ε‐caprolactone) composites , 2003 .

[3]  Antonio Magurno.  Vegetable fibres in automotive interior components , 1999 .

[4]  J. E. Puig,et al.  Flexural, impact and compressive properties of a rigid-thermoplastic matrix/cellulose fiber reinforced composites , 2002 .

[5]  A. Rana,et al.  Short jute fiber reinforced polypropylene composites: effect of compatibiliser, impact modifier and fiber loading , 2003 .

[6]  D. Annerose,et al.  Physical and histochemical properties of kenaf (Hibiscus cannabinus L.) grown under water deficit on a sandy soil , 1997 .

[7]  L. Nicolais,et al.  Effect of processing conditions on dimensions of sisal fibers in thermoplastic biodegradable composites , 2001 .

[8]  Z. Ishak,et al.  Determination of filler content in thermoplastic composites by FTIR analysis , 1995 .

[9]  U. Ishiaku,et al.  A study on the effect of pro-oxidant on the thermo-oxidative degradation behaviour of sago starch filled polyethylene , 2001 .

[10]  Sabu Thomas,et al.  Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites , 1996 .

[11]  R. Li,et al.  Impact behavior of sawdust/recycled–PP composites , 2001 .

[12]  Y. Mai,et al.  Mechanical properties of wood flake–polyethylene composites. II. Interface modification , 2002 .

[13]  Sabu Thomas,et al.  Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene composites , 1999 .

[14]  R. Wool,et al.  Biodegradation dynamics of polymer–starch composites , 2000 .

[15]  Sabu Thomas,et al.  Rheological behavior of short sisal fiber-reinforced polystyrene composites , 2000 .

[16]  Z. Ishak,et al.  The effect of coupling agents on the mechanical and physical properties of oil palm empty fruit bunch–polypropylene composites , 2000 .

[17]  U. Ishiaku,et al.  Sago starch‐filled linear low‐density polyethylene (LLDPE) films: Their mechanical properties and water absorption , 2001 .

[18]  Rouhallah Bagheri.  Effect of processing on the melt degradation of starch‐filled polypropylene , 1999 .

[19]  J. Dole,et al.  Kenaf (Hibiscus cannabinus L.) core as a containerized growth medium component , 1999 .

[20]  R. Li,et al.  Interface modification on the properties of sisal fiber‐ reinforced polypropylene composites , 2002 .

[21]  B. Kokta,et al.  Compounding of cellulose fibers with polypropylene: Effect of fiber treatment on dispersion in the polymer matirx , 1989 .

[22]  R. Landers,et al.  Reactive extrusion of polycaprolactone compounds containing wood flour and lignin , 2001 .

[23]  Julious L. Willett,et al.  Mechanical properties of LDPE/granular starch composites , 1994 .

[24]  Hsin‐Lung Chen,et al.  Composite of polyethylene and kenaf, a natural cellulose fiber , 1994 .

[25]  C. Albano,et al.  Behavior of polyolefin blends with acetylated sisal fibers , 2000 .