Analysis and Comparison of Thickness and Bending Measurements from Fabric Touch Tester (FTT) and Standard Methods

Abstract Fabric Touch Tester (FTT) is a relatively new device from SDL Atlas to determine touch properties of fabrics. It simultaneously measures 13 touch-related fabric physical properties in four modules that include bending and thickness measurements. This study aims to comparatively analyze the thickness and bending measurements made by the FTT and the common standard methods used in the textile industry. The results obtained with the FTT for 11 different fabrics were compared with that of standard methods. Despite the different measurement principle, a good correlation was found between the two methods used for the assessment of thickness and bending. As FTT is a new tool for textile comfort measurement and no standard yet exists, these findings are essential to determine the reliability of the measurements and how they relate to the well-established standard methods.

[1]  A. W. Schopper,et al.  A structural fingertip model for simulating of the biomechanics of tactile sensation. , 2004, Medical engineering & physics.

[2]  Masako Niwa,et al.  Objective Hand Measurement of Nonwoven Fabrics , 1994 .

[3]  Usha Rashmi Amrit.  BEDDING TEXTILES AND THEIR INFLUENCE ON THERMAL COMFORT AND SLEEP , 2007 .

[4]  Kenneth O. Johnson,et al.  The roles and functions of cutaneous mechanoreceptors , 2001, Current Opinion in Neurobiology.

[5]  Junyan Hu.  Characterization of sensory comfort of apparel products , 2006 .

[6]  Wen Zhong,et al.  An EFE model on skin-sleeve interactions during arm rotation. , 2006, Journal of biomechanical engineering.

[7]  A. G. De Boos,et al.  SiroFAST: Fabric Assurance By Simple Testing: a system for fabric objective measurement and its application in fabric and garment manufacture , 1994 .

[8]  I. Krucińska,et al.  Evaluating the Bending Rigidity of Flat Textiles with the Use of an Instron Tensile Tester , 2005 .

[9]  Satoshi Kurata,et al.  Theoretical analysis of compression properties of blankets , 2002 .

[10]  Roger L. Barker,et al.  In Vivo Cutaneous and Perceived Comfort Response to Fabric , 1990 .

[11]  Olga Troynikov,et al.  Evaluation of Surface Characteristics of Fabrics Suitable for Skin Layer of Firefighters’ Protective Clothing , 2011 .

[12]  Izabela Ciesielska-Wrobel,et al.  Fingertip skin models for analysis of the haptic perception of textiles , 2014 .

[13]  Lieva Van Langenhove,et al.  The hand of textiles – definitions, achievements, perspectives – a review , 2012 .

[14]  M. N. Sun,et al.  A New Tester and Method for Measuring Fabric Stiffness and Drape , 2008 .

[15]  Hiroko Yokura,et al.  Objective Hand Measurement of Nonwoven Fabrics Used for the Top Sheets of Disposable Diapers , 2003 .

[16]  International Journal of Affective Engineering , 2015 .

[17]  Lieva Van Langenhove,et al.  Assessment of sensorial comfort of fabrics for protective clothing , 2016 .

[18]  Yi Li,et al.  A Comparative Study of Fabric Stiffness Based on FTT, KES and Subjective Testing , 2013 .

[19]  H. M. Behery,et al.  Effect of mechanical and physical properties on fabric hand , 2005 .

[20]  Milton M. Platt,et al.  Mechanics of Elastic Performance of Textile Materials , 1950 .

[21]  E. Strazdienė,et al.  Textile Hand: A New Method for Textile Objective Evaluation , 2003 .

[22]  Si Chen,et al.  Tactile perception of fabrics with an artificial finger compared to human sensing , 2015 .

[23]  Xiao Liao,et al.  Psychophysical Relations between Interacted Fabric Thermal-Tactile Properties and Psychological Touch Perceptions , 2016 .

[24]  Junyan Hu,et al.  A simultaneous measurement method to characterize touch properties of textile materials , 2014, Fibers and Polymers.

[25]  Yi Li,et al.  Fabric Touch Tester: Integrated evaluation of thermal–mechanical sensory properties of polymeric materials , 2006 .