Multi-star wavefront control with SCExAO instrument: demonstration with an internal source

Although only a small fraction of currently known exoplanets was found in binary and multiple systems, studies show that such stars do form planets, with an efficiency that is smaller, but within an order of magnitude of single stars. However, binaries are rarely considered as targets for exoplanet imaging space missions because of challenges of removing light from the second binary component. In our previous works it was shown how to solve two main issues that make exoplanet imaging in multiple systems impossible, namely, the mutual incoherence of speckles created by different binary components, and inability of a deformable mirror (DM) to control the starlight beyond the DM outer working angle/Nyquist limit. Feasibility of the developed Multi-Star Wavefront Control (MSWC) and Super-Nyquist Wavefront Control (SNWC) algorithms was demonstrated at the Ames Coronagraph Experiment (ACE) laboratory using a simple imaging system with a DM and no coronagraph. In this paper, we report the results our MSWC experiments using the Subaru Coronagraphic Extreme Adap- tive Optics (SCExAO) instrument that is part of our technology development effort. The main goal of these experiments is to validate MSWC on a real coronagraphic system by using an internal source to simulate at least one real representative binary target. In our demonstration narrow-band contrast of 4.1 × 10−6 has been reached by using MSWC in a 12 × 6λ/D dark zone separated from the primary component of the simulated binary star (STF 3121 AB) by 4λ/D. This contrast is better by a factor of 13.2 than the contrast floor reached by standard single-star wavefront control (SSWC). We also discuss the main limiting factors that affect the MSWC performance in our experiments.