Multivariable optimization of thermal cracking severity

Abstract The changing market forces are driving olefin producers to operate their steam crackers at high operating rates and optimum production performances. These require the use of an optimizer for assessment of viable operational strategies. Most of the optimizers currently employed in this area make use of the coil outlet temperature to determine an improved severity. In rare cases only, a multivariable optimization is performed on the furnace operational conditions. This kind of optimization is implemented in PyroFur for optimizing both the furnace operation and the reaction severity using a set of first-principles mathematical models in which the coil outlet temperature, the total feed flow rate and the steam/hydrocarbon ratio are altered. The suggested procedure was applied as a case study for a typical liquid furnace. Typical improvements obtained from the optimizing control strategy proposed in this article include about 1.4% increased profitability per year per furnace. Effect of a change in the prices or the feed composition is also presented.

[1]  Gilbert F. Froment,et al.  Scaling up of naphtha cracking coils , 1981 .

[2]  E. Eckert.  NON-TRADITIONAL CHARACTERIZATION OF PETROLEUM MIXTURES IN TERMS OF SELECTED COMPONENTS , 1999 .

[3]  Kevin Van Geem,et al.  Automatic reaction network generation using RMG for steam cracking of n‐hexane , 2006 .

[4]  Tareq A. Albahri.  Molecularly Explicit Characterization Model (MECM) for Light Petroleum Fractions , 2005 .

[5]  M. Golombok,et al.  Severity Parameters for Steam Cracking , 2001 .

[6]  Eliseo Ranzi,et al.  Detailed prediction of olefin yields from hydrocarbon pyrolysis through a fundamental simulation model (SPYRO) , 1979 .

[7]  R. J. Quann,et al.  Modeling the chemistry of complex petroleum mixtures. , 1998, Environmental health perspectives.

[8]  Nan Zhang,et al.  A novel methodology in transforming bulk properties of refining streams into molecular information , 2005 .

[9]  L. Szepesy.  Feedstock characterization and prediction of product yields for industrial naphtha crackers on the basis of laboratory and bench-scale pyrolysis , 1980 .

[10]  Shanying Hu,et al.  Combine molecular modeling with optimization to stretch refinery operation , 2002 .

[11]  K. V. Geem.  Single event microkinetic model for steam cracking of hydrocarbons , 2006 .

[12]  G. Froment,et al.  Thermal cracking of kerosine , 1984 .

[13]  Ramin Karimzadeh,et al.  Flowsheeting of steam cracking furnaces , 2009 .

[14]  Guy Marin,et al.  Challenges of Modeling Steam Cracking of Heavy Feedstocks , 2007 .

[15]  Kevin Van Geem,et al.  Two Severity Indices for Scale-Up of Steam Cracking Coils , 2005 .

[16]  M. Haine,et al.  Van Damme A. , 1986 .

[17]  G. Côme.  Radical reaction mechanisms. Mathematical theory , 1977 .

[18]  S. M. Jacob,et al.  COMPOSITIONAL MODELING REDUCES CRUDE-ANALYSIS TIME, PREDICTS YIELDS , 1998 .

[19]  Mohammad R. Riazi,et al.  Prediction of molecular-type analysis of petroleum fractions and coal liquids , 1986 .

[20]  Matthew Neurock,et al.  Molecular representation of complex hydrocarbon feedstocks through efficient characterization and stochastic algorithms , 1994 .

[21]  Winston R. Shu,et al.  Cracking severity index in pyrolysis of petroleum fractions , 1982 .

[22]  Reduced Mechanisms for Propane Pyrolysis , 1995 .

[23]  Damien Hudebine,et al.  Molecular reconstruction of LCO gasoils from overall petroleum analyses , 2004 .

[24]  R. H. Snow,et al.  A Chemical Kinetics Computer Program for Homogeneous and Free-Radical Systems of Reactions , 1966 .

[25]  Constantinos Theodoropoulos,et al.  Characterisation of heavy petroleum fractions using modified molecular-type homologous series (MTHS) representation , 2008 .

[26]  Tareq A. Albahri.  Enhanced method for predicting the properties of light petroleum fractions , 2006 .

[27]  Guy B. Marin,et al.  Molecular reconstruction of naphtha steam cracking feedstocks based on commercial indices , 2007, Comput. Chem. Eng..

[28]  Stephen B. Jaffe,et al.  Building useful models of complex reaction systems in petroleum refining , 1996 .

[29]  H. R. Linden,et al.  Gaseous Product Distribution in Hydrocarbon Pyrolysis , 1955 .

[30]  Nils van Velzen,et al.  Equation-based SPYRO® model and solver for the simulation of the steam cracking process , 2001 .

[31]  Ramin Karimzadeh,et al.  Design of a Flexible Pilot Plant Reactor for the Steam Cracking Process , 2008 .

[32]  S. Narayanan,et al.  Thermal Cracking of Ethane and Ethane-Propane Mixtures , 1976 .

[33]  Arjan van der Schaft,et al.  Conservation Laws and Lumped System Dynamics , 2009 .

[34]  Sunwon Park,et al.  CRACKER — a PC based simulator for industrial cracking furnaces , 2000 .

[35]  Tamás Turányi,et al.  On the error of the quasi-steady-state approximation , 1993 .

[36]  Ramin Karimzadeh,et al.  Dynamic Modeling and Simulation of Steam Cracking Furnaces , 2007 .

[37]  Linda J. Broadbelt,et al.  Molecular Modeling in Heavy Hydrocarbon Conversions , 2020 .