Cascaded Metasurface Design Using Electromagnetic Inversion with Gradient-Based Optimization

This paper presents an electromagnetic inversion algorithm for the design of cascaded metasurfaces that enables the design process to begin from more practical output field specifications such as a desired power pattern or far-field performance criteria. Thus, this method combines the greater field transformation support of multiple metasurfaces with the flexibility of the electromagnetic inverse source framework. To this end, two optimization problems are formed: one associated with the interior space between two metasurfaces, and the other for the exterior space. The cost functionals corresponding to each of these two optimization problems are minimized using the nonlinear conjugate gradient algorithm with analytic expressions for the gradient operators. The numerical implementation of the developed design procedure is presented in detail, including a total variation regularizer that is incorporated into the optimization procedure to favour smooth field variations from one unit cell to the next. The capabilities of the method are demonstrated by converting the produced surface susceptibilities into threelayer admittance sheet models, which are simulated in several two-dimensional (2D) examples.

[1]  C. Pfeiffer,et al.  Metamaterial Huygens' surfaces: tailoring wave fronts with reflectionless sheets. , 2013, Physical review letters.

[2]  Brian O. Raeker,et al.  Compound Metaoptics for Amplitude and Phase Control of Wave Fronts. , 2018, Physical review letters.

[3]  A. Alú,et al.  Full control of nanoscale optical transmission with a composite metascreen. , 2013, Physical review letters.

[4]  George V. Eleftheriades,et al.  Huygens' metasurfaces via the equivalence principle: design and applications , 2016 .

[5]  David R. Smith,et al.  An Overview of the Theory and Applications of Metasurfaces: The Two-Dimensional Equivalents of Metamaterials , 2012, IEEE Antennas and Propagation Magazine.

[6]  D. González-Ovejero,et al.  Modulated Metasurface Antennas for Space: Synthesis, Analysis and Realizations , 2015, IEEE Transactions on Antennas and Propagation.

[7]  A. Bos Complex gradient and Hessian , 1994 .

[8]  Trevor Brown,et al.  On the Use of Electromagnetic Inversion for Metasurface Design , 2019, IEEE Transactions on Antennas and Propagation.

[9]  G. Eleftheriades,et al.  Bianisotropic Huygens’ Metasurface Pairs for Nonlocal Power-Conserving Wave Transformations , 2018, IEEE Antennas and Wireless Propagation Letters.

[10]  Christophe Caloz,et al.  Design, concepts, and applications of electromagnetic metasurfaces , 2017, Nanophotonics.

[11]  G. Vecchi,et al.  Field And Source Equivalence In Source Reconstruction On 3D Surfaces , 2010 .

[12]  Puyan Mojabi,et al.  Electromagnetic Inversion With Local Power Conservation for Metasurface Design , 2020, IEEE Antennas and Wireless Propagation Letters.

[13]  B. A. D. H. Brandwood A complex gradient operator and its applica-tion in adaptive array theory , 1983 .

[14]  G. Eleftheriades,et al.  Discontinuous electromagnetic fields using orthogonal electric and magnetic currents for wavefront manipulation. , 2013, Optics express.

[15]  G. Eleftheriades,et al.  Bianisotropic Huygens’ Metasurface for Wideband Impedance Matching Between Two Dielectric Media , 2018, IEEE Transactions on Antennas and Propagation.

[16]  Sergei A. Tretyakov,et al.  Susceptibility Derivation and Experimental Demonstration of Refracting Metasurfaces Without Spurious Diffraction , 2018, IEEE Transactions on Antennas and Propagation.

[17]  Christophe Caloz,et al.  General Metasurface Synthesis Based on Susceptibility Tensors , 2014, IEEE Transactions on Antennas and Propagation.

[18]  Brian O. Raeker,et al.  All-Dielectric Compound Metaoptics , 2019, 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting.

[19]  Vasileios G. Ataloglou,et al.  Realizing Antenna Arrays with Huygens’ Metasurface Pairs Based on a Moment-Method-Like Design , 2020, 2020 14th European Conference on Antennas and Propagation (EuCAP).

[20]  Anthony Grbic,et al.  Bianisotropic Metasurfaces for Optimal Polarization Control: Analysis and Synthesis , 2014 .

[21]  J. LoVetri,et al.  Microwave Biomedical Imaging Using the Multiplicative Regularized Gauss--Newton Inversion , 2009, IEEE Antennas and Wireless Propagation Letters.

[22]  G. Eleftheriades,et al.  Polarization Control Using Tensor Huygens Surfaces , 2014, IEEE Transactions on Antennas and Propagation.

[23]  P. M. Berg,et al.  Imaging of biomedical data using a multiplicative regularized contrast source inversion method , 2002 .

[24]  M. Dehmollaian,et al.  Wave Scattering by a Cylindrical Metasurface Cavity of Arbitrary Cross Section: Theory and Applications , 2018, IEEE Transactions on Antennas and Propagation.

[25]  Trevor Brown,et al.  On the Use of the Source Reconstruction Method for Metasurface Design , 2018 .