Preparation of in-situ AlN-TiC nanoparticles and their refinement and reinforcement effects on Al-Zn-Mn-Cu alloy

[1]  M. Daymond,et al.  Indentation size effect, geometrically necessary dislocations and pile-up effects in hardness testing of irradiated nickel , 2021 .

[2]  Lai‐Chang Zhang,et al.  Interface formation and bonding control in high-volume-fraction (TiC+TiB2)/Al composites and their roles in enhancing properties , 2021 .

[3]  Lingyu Liu,et al.  Synthesis and characterization of an in-situ Al2O3/Al–Cu composite with a heterogeneous structure , 2021, Journal of Alloys and Compounds.

[4]  Biao Chen,et al.  Achieving high combination of strength and ductility of Al matrix composite via in-situ formed Ti-Al3Ti core-shell particle , 2020 .

[5]  T. B. Rao.  Microstructural, mechanical, and wear properties characterization and strengthening mechanisms of Al7075/SiCnp composites processed through ultrasonic cavitation assisted stir-casting , 2020 .

[6]  Huijun Kang,et al.  Microstructure and enhanced mechanical properties of hybrid-sized B4C particle-reinforced 6061Al matrix composites , 2020, Materials Science and Engineering: A.

[7]  M. Hayat,et al.  High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane , 2020 .

[8]  A. Abbasi,et al.  Effect of amount of TiB2 and B4C particles on tribological behavior of Al7075/B4C/TiB2 mono and hybrid surface composites produced by friction stir processing , 2020 .

[9]  J. Llorca,et al.  An analysis of the influence of the precipitate type on the mechanical behavior of Al - Cu alloys by means of micropillar compression tests , 2020, 2005.07426.

[10]  Jing He,et al.  Evaluation of the effect of adding carbon nanotubes on the effective mechanical properties of ceramic particulate aluminum matrix composites , 2020 .

[11]  Xiangfa Liu,et al.  Design of an in–situ multi–scale particles reinforced (Al2O3+ZrB2+AlN)/Al composite with high strength, elasticity modulus and thermal stability , 2020 .

[12]  S. Arunkumar,et al.  Optimization of wear behaviour of Al7075 hybrid metal matrix composites using Taguchi approach , 2020 .

[13]  S. Dwivedi,et al.  Microstructure and mechanical behaviour of Al/SiC/Al2O3 hybrid metal matrix composite , 2020 .

[14]  C. Cui,et al.  Preparation of in-situ NdB6 nanoparticles and their reinforcement effect on Al–Cu–Mn alloy , 2019, Journal of Alloys and Compounds.

[15]  Xiangfa Liu,et al.  Synthesis of a (ZrAl3+AlN)/Al composite and the influence of particles content and element Cu on the microstructure and mechanical properties , 2019, Journal of Alloys and Compounds.

[16]  A. Taheri,et al.  Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective , 2019, Journal of Alloys and Compounds.

[17]  D. Golberg,et al.  Spark plasma sintered Al-based composites reinforced with BN nanosheets exfoliated under ball milling in ethylene glycol , 2019, Materials Science and Engineering: A.

[18]  M. S. Charoo,et al.  Application of Hybrid Aluminum Matrix Composite in Automotive Industry , 2019, Materials Today: Proceedings.

[19]  S. Lü,et al.  Effects of nano-SiCp content on microstructure and mechanical properties of SiCp/A356 composites assisted with ultrasonic treatment , 2018, Transactions of Nonferrous Metals Society of China.

[20]  F. Qiu,et al.  Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nano‐Sized Particles , 2018 .

[21]  Q. Mei,et al.  Hall-Petch relations and strengthening of Al-ZnO composites in view of grain size relative to interparticle spacing , 2018, Scripta Materialia.

[22]  Biao Chen,et al.  Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes , 2018, Carbon.

[23]  Rahul K Gupta,et al.  Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition , 2018 .

[24]  Jianjun Wu,et al.  Dislocation density based model for Al-Cu-Mg alloy during quenching with considering the quench-induced precipitates , 2018 .

[25]  V. Mohanavel,et al.  Microstructure and mechanical properties of hard ceramic particulate reinforced AA7075 alloy composites via liquid metallurgy route , 2018 .

[26]  M. Hassanzadeh-Aghdam,et al.  A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites , 2017 .

[27]  R. Tao,et al.  Superplasticity behavior and deformation mechanism of the in-situ Al3Zr/6063Al composites processed by friction stir processing , 2017 .

[28]  Pankaj Agarwal,et al.  Effect of TiC particles on the mechanical properties of aluminium alloy metal matrix composites (MMCs) , 2017 .

[29]  Biqiang Chen,et al.  Availability of in-situ reinforced active-transient liquid phase bond with good wettability for 70 vol.% SiCp/A356 composite using Al-Mg-Ga-Ti interlayer , 2016 .

[30]  Gang Chen,et al.  Effects of ultrasonic vibration on the microstructure and tensile properties of the nano ZrB2/2024Al composites synthesized by direct melt reaction , 2016 .

[31]  A. Chauhan,et al.  Characterization of hybrid aluminum matrix composites for advanced applications – A review , 2016 .

[32]  C. Wu,et al.  Local microstructure evolution in Al 6061-T6 friction stir weld nugget enhanced by ultrasonic vibration , 2016 .

[33]  S. Jie,et al.  Study on microscopic ductile fracture of in-situ TiB2/2024 Al matrix composite , 2016 .

[34]  T. P. D. Rajan,et al.  Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons , 2015 .

[35]  K. Alaneme,et al.  Microstructural characteristics, mechanical and wear behaviour of aluminium matrix hybrid composites reinforced with alumina, rice husk ash and graphite , 2015 .

[36]  Daolun L. Chen,et al.  A Unified Model for the Prediction of Yield Strength in Particulate-Reinforced Metal Matrix Nanocomposites , 2015, Materials.

[37]  R. German,et al.  An exploratory investigation on the in-situ synthesis of SiC/AlN/Al composites by spark plasma sintering , 2015 .

[38]  G. Ugrasen,et al.  Hardness and Wear Characteristics of Hybrid Aluminium Metal Matrix Composites Produced by Stir Casting Technique , 2015 .

[39]  J. Bhatt,et al.  Nanoindentation studies of ex situ AlN/Al metal matrix nanocomposites , 2014 .

[40]  M. Gupta,et al.  Structural and mechanical properties of Ni60Nb40 amorphous alloy particle reinforced Al-based composites produced by microwave-assisted rapid sintering , 2013 .

[41]  K. Palanikumar,et al.  Evaluation of mechanical and wear properties of hybrid aluminium matrix composites , 2013 .

[42]  W. Wang,et al.  Reactive mechanism and mechanical properties of in situ composites fabricated from an Al-TiO2 system by friction stir processing , 2012 .

[43]  N. Ho,et al.  Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing , 2011 .

[44]  Ke Yang,et al.  An enhanced FEM model for particle size dependent flow strengthening and interface damage in particle reinforced metal matrix composites , 2011 .

[45]  B. Devincre,et al.  Orowan strengthening at low temperatures in bcc materials studied by dislocation dynamics simulations , 2011 .

[46]  Benoit Devincre,et al.  Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations , 2010 .

[47]  Hiroyuki Nakayama,et al.  Pulsed Current Sintering of Titanium Fiber , 2009 .

[48]  F. Yin,et al.  Properties of submicron AlN particulate reinforced aluminum matrix composite , 2009 .

[49]  M. Gupta,et al.  Properties and deformation behaviour of Mg–Y2O3 nanocomposites , 2007 .

[50]  M. Easton,et al.  Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model , 2005 .

[51]  Mingxing Zhang,et al.  Edge-to-edge matching and its applications: Part II. Application to Mg–Al, Mg–Y and Mg–Mn alloys , 2005 .

[52]  Kenichi Hamada,et al.  Processing of TiNi SMA fiber reinforced AZ31 Mg alloy matrix composite by pulsed current hot pressing , 2004 .

[53]  S. Celotto.  TEM study of continuous precipitation in Mg–9 wt%Al–1 wt%Zn alloy , 2000 .

[54]  P. Bowen,et al.  Tensile properties of particulate-reinforced metal matrix composites , 1996 .

[55]  N. Hansen,et al.  The Effect of Grain Size and Strain on the Tensile Flow Stress of Aluminium at Room Temperature , 1977 .