Micro/nano incremental material removal mechanisms in high-frequency ultrasonic vibration-assisted cutting of 316L stainless steel

[1]  B. Huang,et al.  Nano-Twinning and Martensitic Transformation Behaviors in 316L Austenitic Stainless Steel During Large Tensile Deformation , 2022, Acta Metallurgica Sinica.

[2]  Chunjin Wang,et al.  Friction behaviors in the metal cutting process: state of the art and future perspectives , 2022, International Journal of Extreme Manufacturing.

[3]  F. Fang,et al.  Nanometric cutting: Mechanisms, practices and future perspectives , 2022, International Journal of Machine Tools and Manufacture.

[4]  C. K. Nirala,et al.  Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti-6Al-4V , 2022, Tribology International.

[5]  K. Palaniappan,et al.  Influence of workpiece texture and strain hardening on chip formation during machining of Ti–6Al–4V alloy , 2021, International Journal of Machine Tools and Manufacture.

[6]  J. Rech,et al.  Turning-induced surface integrity for a fillet radius in a 316L austenitic stainless steel , 2021 .

[7]  X. Zhang,et al.  Improvement of Ti–6Al–4V surface integrity through the use of high-speed ultrasonic vibration cutting , 2021 .

[8]  Z. Xiong,et al.  Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review , 2021, International Journal of Machine Tools and Manufacture.

[9]  T. Ko,et al.  Analytical, FEA, and experimental research of 2D-Vibration Assisted Cutting (2D-VAC) in titanium alloy Ti6Al4V , 2021, The International Journal of Advanced Manufacturing Technology.

[10]  Jiwang Yan,et al.  Machinability exploration for high-entropy alloy FeCrCoMnNi by ultrasonic vibration-assisted diamond turning , 2021 .

[11]  Chenyang Zhao,et al.  An Investigation of the High-Frequency Ultrasonic Vibration-Assisted Cutting of Steel Optical Moulds , 2021, Micromachines.

[12]  Changxi Xue,et al.  Fabrication of high-precision freeform surface on die steel by ultrasonic-assisted slow tool servo. , 2021, Optics express.

[13]  Chenbing Ni,et al.  Review of ultrasonic vibration-assisted machining in advanced materials , 2020 .

[14]  W. Liao,et al.  On ductile-regime elliptical vibration cutting of silicon with identifying the lower bound of practicable nominal cutting velocity , 2020, Journal of Materials Processing Technology.

[15]  W. Cong,et al.  Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives , 2020 .

[16]  Yue Xiaobin,et al.  A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals , 2020, International Journal of Extreme Manufacturing.

[17]  A. Agrawal,et al.  Extreme twinning and hardening of 316L from a scalable impact process , 2018, Materials Letters.

[18]  T. Langdon,et al.  Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing , 2018 .

[19]  Minh-Son Pham,et al.  Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing , 2017 .

[20]  O. Dambon,et al.  Ultrasonic tooling system design and development for single point diamond turning (SPDT) of ferrous metals , 2017 .

[21]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[22]  B. Wang,et al.  Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy , 2016 .

[23]  Eiji Shamoto,et al.  Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond , 2014 .

[24]  J. Jonas,et al.  Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions , 2014 .

[25]  M. Nategh,et al.  Theoretical and experimental investigation of the frictional behavior of the tool–chip interface in ultrasonic-vibration assisted turning , 2013 .

[26]  Kui Liu,et al.  An analytical force model for orthogonal elliptical vibration cutting technique , 2012 .

[27]  A. Kumar,et al.  Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools , 2011 .

[28]  Mahmudur Rahman,et al.  Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting , 2009 .

[29]  L. N. López de Lacalle,et al.  Analysis of ultrasonic-assisted drilling of Ti6Al4V , 2009 .

[30]  Thomas A. Dow,et al.  Review of vibration-assisted machining , 2008 .

[31]  Mahmudur Rahman,et al.  Effect of machining parameters in ultrasonic vibration cutting , 2008 .

[32]  Jose Antonio Sanchez,et al.  Simultaneous measurement of forces and machine tool position for diagnostic of machining tests , 2005, IEEE Transactions on Instrumentation and Measurement.

[33]  Yonghong Zhang,et al.  Suppression of burrs in turning with ultrasonic elliptical vibration cutting , 2005 .

[34]  M. Xiao,et al.  Analysis of chatter suppression in vibration cutting , 2002 .

[35]  P. Feng,et al.  Understanding the abnormal effects of ultrasonic vibration on tool wear and surface generation in Zr-based bulk metallic glass cutting , 2022, CIRP Journal of Manufacturing Science and Technology.

[36]  Bin Zou,et al.  Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti–6Al–4V using Ti(C7N3)-based cermet micro-mill , 2020 .

[37]  Xinquan Zhang,et al.  Oxygen-shielded ultrasonic vibration cutting to suppress the chemical wear of diamond tools , 2019, CIRP Annals.

[38]  Eiji Shamoto,et al.  Ultaprecision Diamond Cutting of Hardened Steel by Applying Elliptical Vibration Cutting , 1999 .

[39]  Eiji Shamoto,et al.  Ultrasonic elliptical vibration cutting , 1995 .

[40]  Eiji Shamoto,et al.  Ultraprecision diamond turning of stainless steel by applying ultrasonic vibration , 1991 .