Tree Growth Characteristics of Epoxy Resin in LN2 Under Magnetic Field

Epoxy resin, which is used as the base material of superconducting magnet insulation, faces the challenge of liquid helium temperature and magnetic field. Investigations about the influence of magnetic field on the electrical tree characteristics in epoxy resin under low temperature are reported in this paper. Samples made of epoxy resin were stressed in the needle-plate geometry electrodes. The experimental temperature ranged from room temperature to liquid nitrogen temperature. The experimental results indicate that both the low temperature and the magnetic field have influences on treeing process. The typical tree structures in epoxy resin are different with the variation of low temperature and magnetic flux density. It is revealed that the epoxy resin sample under low-temperature conditions is resistant to the growth of the electrical tree. However, when under the same low temperature, the tree initiation and propagation processes are accelerated by the high magnetic flux density.

[1]  T. Tanaka,et al.  Nanocomposites-a review of electrical treeing and breakdown , 2009, IEEE Electrical Insulation Magazine.

[2]  Jiandong Wu,et al.  Characteristics of initial trees of 30 to 60 μm length in epoxy/silica nanocomposite , 2012, IEEE Transactions on Dielectrics and Electrical Insulation.

[3]  N. Chalashkanov,et al.  Statistical Analysis of Partial Discharges from Electrical Trees Grown in a Flexible Epoxy Resin , 2008, 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[4]  J. V. Champion,et al.  Simulation of partial discharges in conducting and non-conducting electrical tree structures , 2001 .

[5]  R. Zanino,et al.  Multiscale Approach and Role of Validation in the Thermal-Hydraulic Modeling of the ITER Superconducting Magnets , 2013, IEEE Transactions on Applied Superconductivity.

[6]  P. Chowdhuri.  Some Characteristics of Dielectric Materials at Cryogenic Temperatures for HVDC Systems , 1981, IEEE Transactions on Electrical Insulation.

[7]  L. A. Dissado,et al.  Effect of tree channel conductivity on electrical tree shape and breakdown in XLPE cable insulation samples , 2011, IEEE Transactions on Dielectrics and Electrical Insulation.

[8]  Len A. Dissado,et al.  Understanding electrical trees in solids: from experiment to theory , 2001, ICSD'01. Proceedings of the 20001 IEEE 7th International Conference on Solid Dielectrics (Cat. No.01CH37117).

[9]  B. Du,et al.  Effect of magnetic field on electrical treeing behavior in XLPE cable insulation , 2011, Proceedings of 2011 International Symposium on Electrical Insulating Materials.

[10]  B. X. Du,et al.  Tree initiation characteristics of epoxy resin in Ln2 for superconducting magnet insulation , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[11]  Y. Ohki,et al.  Frequency dependence of breakdown performance of XLPE with different artificial defects , 2012, IEEE Transactions on Dielectrics and Electrical Insulation.

[12]  Qingyun Qu,et al.  Testing of the Ceramic Insulation Break for Fusion Device , 2014, IEEE Transactions on Applied Superconductivity.

[13]  B. Du,et al.  Effect of low temperature on tree characteristics in silicone rubber with different power frequency , 2014, IEEE Transactions on Dielectrics and Electrical Insulation.

[14]  S. Nam,et al.  Analysis on the Dielectric Characteristics of Solid Insulation Materials in $\hbox{LN}_{2}$ for Development of High Voltage Magnet Applications , 2014, IEEE Transactions on Applied Superconductivity.

[15]  Katsutoshi Kudo,et al.  Fractal analysis of electrical trees , 1998 .

[16]  B. Kolbasov,et al.  Reliability of Force Cooled Superconducting Magnets for Fusion , 2012, IEEE Transactions on Applied Superconductivity.

[17]  S M Rowland,et al.  Investigating the impact of harmonics on the breakdown of epoxy resin through electrical tree growth , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[18]  T. Han,et al.  Electrical tree characteristics in silicone rubber under repetitive pulse voltage , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[19]  S M Rowland,et al.  Investigating the influence of the lubricant coating on hypodermic needles on electrical tree characteristics in epoxy resin , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[20]  B. Du,et al.  Effect of temperature on electrical tree in silicone rubber , 2010, 2010 10th IEEE International Conference on Solid Dielectrics.

[21]  J. Hourtoule,et al.  The ITER reactive power compensation and harmonic filtering (RPC & HF) system: Stability & performance , 2011, 2011 IEEE/NPSS 24th Symposium on Fusion Engineering.

[22]  C. Grantham,et al.  Characterization of Partial Discharge With Polyimide Film in $\hbox{LN}_{2}$ Considering High Temperature Superconducting Cable Insulation , 2014, IEEE Transactions on Applied Superconductivity.

[23]  B. X. Du,et al.  Effects of magnetic field on electrical tree growth in silicone rubber under repetitive pulse voltage , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.