Flow boiling in horizontal flattened tubes: Part I ― Two-phase frictional pressure drop results and model

[1]  J. Thome,et al.  Flow pattern based two-phase frictional pressure drop model for horizontal tubes. Part I: Diabatic and adiabatic experimental study , 2007 .

[2]  H. Wang,et al.  Condensation from gas–vapour mixtures in small non-circular tubes , 2006 .

[3]  J. Thome,et al.  New Prediction Methods for CO2 Evaporation Inside Tubes: Part II - An Updated General Flow Boiling Heat Transfer Model Based on Flow Patterns , 2008 .

[4]  John R. Thome,et al.  Prediction of Two-Phase Pressure Gradients of Refrigerants in Horizontal Tubes , 2002 .

[5]  S. Rouhani,et al.  CALCULATION OF VOID VOLUME FRACTION IN THE SUBCOOLED AND QUALITY BOILING REGIONS , 1970 .

[6]  J. Thome,et al.  Investigation of Flow Boiling in Horizontal Tubes: Part I, A New Diabatic Two-Phase Flow Pattern Map , 2005 .

[7]  J. Thome,et al.  Flow pattern based two-phase frictional pressure drop model for horizontal tubes, Part II: New phenomenological model , 2007 .

[8]  J. Thome.  Boiling in microchannels: a review of experiment and theory , 2004 .

[9]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[10]  John R. Thome,et al.  Erratum to: “New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporating inside horizontal tubes” [Heat Mass Transfer 49 (21–22) (2006) 4082–4094] , 2007 .

[11]  J. Thome,et al.  Investigation of Flow Boiling in Horizontal Tubes: Part II, Development of a New Heat Transfer Model for Stratified-Wavy, Dryout and Mist Flow Regimes , 2005 .

[12]  Dieter Mewes,et al.  Review of two-phase flow and flow boiling of mixtures in small and mini channels , 2006 .

[13]  John R. Thome,et al.  New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporating inside horizontal tubes , 2006 .

[14]  Satish G. Kandlikar,et al.  Fundamental issues related to flow boiling in minichannels and microchannels , 2002 .

[15]  J. Thome,et al.  Flow Boiling in Horizontal Tubes. Part 1; Development of a Diabatic Two–Phase Flow Pattern Map , 1998 .

[16]  J. Quibén.  Experimental and analytical study of two-phase pressure drops during evaporation in horizontal tubes , 2005 .

[17]  F. Dittus,et al.  Heat transfer in automobile radiators of the tubular type , 1930 .

[18]  Andrea Luke,et al.  Boiling phenomena with surfactants and polymeric additives: A state-of-the-art review , 2007 .

[19]  J. Thome,et al.  New prediction methods for CO2 evaporation inside tubes: Part I – A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops , 2008 .

[20]  S. Klein,et al.  NIST Standard Reference Database 23: NIST Thermodynamic and Transport Properties of Refrigerants and Refrigerant Mixtures-REFPROP, Version 6.0 | NIST , 1998 .

[21]  John R. Thome,et al.  Two-Phase Flow Patterns and Flow-Pattern Maps: Fundamentals and Applications , 2008 .

[22]  C. A. Infante Ferreira,et al.  Refrigerant charge, pressure drop, and condensation heat transfer in flattened tubes , 2003 .

[23]  J. Taylor.  An Introduction to Error Analysis , 1982 .

[24]  Shigeru Koyama,et al.  An experimental study on condensation of refrigerant R134a in a multi-port extruded tube , 2003 .

[25]  J. Thome,et al.  Ammonia two-phase flow in a horizontal smooth tube: Flow pattern observations, diabatic and adiabatic frictional pressure drops and assessment of prediction methods , 2009 .