Numerical analysis of zeptogram/Hz-level mass responsivity for in-plane resonant nano-electro-mechanical sensors

This paper presents numerical analysis of an in-plane resonant Nano-Electro-Mechanical (NEM) sensor based on mass-detection principle using a 3D FEM electromechanical simulation combined with a NEM/MOS hybrid circuit simulation. The self-assembled linker molecules are modeled simply by adding extra surface coating layer, and three different functionalization schemes are studied: top and bottom, only top and all-around configurations. We investigate the impacts of the coating layer mass change as well as stiffness change on the resonance frequency by varying thickness of the coating layer for all the configurations. The small signal AC analysis of the sensor is performed, and the effect of the coating layer on the output signal is studied. Mass of the coating layer is then changed in order to model the random adsorption of target molecules onto the coating layer surface. We show that the NEM sensor enables to achieve the mass responsivity of 0.05 zeptogram/Hz for all the different functionalization schemes, which is approximately eleven orders smaller than that reported for present quartz crystal microbalance sensors. Moreover, we clarify that the scaling rule of the mass responsivity is given by k4 regardless of the different functionlization configurations.

[1]  M. Al Khusheiny,et al.  Aluminum based Two-Port-Clamped-Clamped Resonators , 2006, 2006 IEEE International Conference on Semiconductor Electronics.

[2]  M. Roukes,et al.  A self-sustaining ultrahigh-frequency nanoelectromechanical oscillator. , 2008, Nature nanotechnology.

[3]  M.G. Allen,et al.  High-Q mechanical tuning of MEMS resonators using a metal deposition -annealing technique , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[4]  N. Lobontiu.  Mechanics of microelectromechanical systems , 2004 .

[5]  Kaustav Banerjee,et al.  Design and Analysis of Hybrid NEMS-CMOS Circuits for Ultra Low-Power Applications , 2007, 2007 44th ACM/IEEE Design Automation Conference.

[6]  Selective Functionalization of Silicon Micro/Nanowire Sensors via Localized Joule Heating , 2007, 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[7]  Pascal Ancey,et al.  Silicon on nothing MEMS electromechanical resonator , 2008, ArXiv.

[8]  M. Roukes,et al.  Zeptogram-scale nanomechanical mass sensing. , 2005, Nano letters.

[9]  Xavier Borrisé,et al.  Electromechanical model of a resonating nano-cantilever-based sensor for high-resolution and high-sensitivity mass detection , 2001 .

[10]  M. Roukes,et al.  Ultrasensitive nanoelectromechanical mass detection , 2004, cond-mat/0402528.

[11]  B. Pruvost,et al.  3-D Design and Analysis of Functional NEMS-gate MOSFETs and SETs , 2007, IEEE Transactions on Nanotechnology.

[12]  L. Buchaillot,et al.  Ultra-Sensitive Capacitive Detection Based on SGMOSFET Compatible With Front-End CMOS Process , 2009, IEEE Journal of Solid-State Circuits.

[13]  M. Roukes,et al.  Fabrication of high frequency nanometer scale mechanical resonators from bulk Si crystals , 1996 .