High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility

[1]  Ali M. Zolali,et al.  Morphology development in poly (lactic acid)/polyamide11 biobased blends: Chain mobility and interfacial interactions , 2017 .

[2]  Ali M. Zolali,et al.  Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide) , 2017 .

[3]  Ted T. Tower,et al.  Lightweight micro-cellular plastics from polylactide/polyolefin hybrids , 2016 .

[4]  Deborah K. Schneiderman,et al.  Toughening Glassy Poly(lactide) with Block Copolymer Micelles. , 2016, ACS macro letters.

[5]  F. Wurm,et al.  Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation. , 2016, Chemical reviews.

[6]  Yong Yang,et al.  Isosorbide dioctoate as a “green” plasticizer for poly(lactic acid) , 2016 .

[7]  Dujing Wang,et al.  Tailoring crystallization behavior of poly (l-lactide) with a low molecular weight aliphatic amide , 2015, Colloid and Polymer Science.

[8]  Dujing Wang,et al.  Phase morphology, crystallization behavior and mechanical properties of poly(L-lactide) toughened with biodegradable polyurethane: Effect of composition and hard segment ratio , 2015, Chinese Journal of Polymer Science.

[9]  Dujing Wang,et al.  Enhanced Crystallization Rate of Poly(l‐lactide) Mediated by a Hydrazide Compound: Nucleating Mechanism Study , 2015 .

[10]  Ming‐bo Yang,et al.  Tailoring the impact behavior of polyamide 6 ternary blends via a hierarchical core–shell structure in situ formed in melt mixing , 2015 .

[11]  A. Tsou,et al.  Enhancement in interfacial reactive compatibilization by chain mobility , 2014 .

[12]  Yongjin Li,et al.  High‐performance biosourced poly(lactic acid)/polyamide 11 blends with controlled salami structure , 2014 .

[13]  Chaobin He,et al.  Biodegradable “Core–Shell” Rubber Nanoparticles and Their Toughening of Poly(lactides) , 2013 .

[14]  Dujing Wang,et al.  Morphology and performance control of PLLA-based porous membranes by phase separation , 2013 .

[15]  Q. Fu,et al.  Toughening of poly(l-lactide) with poly(ε-caprolactone): Combined effects of matrix crystallization and impact modifier particle size , 2013 .

[16]  Shouke Yan,et al.  Fabrication of High Toughness Poly(lactic acid) by Combining Plasticization with Cross-linking Reaction , 2012 .

[17]  G. Stoclet,et al.  Morphology, thermal behavior and mechanical properties of binary blends of compatible biosourced polymers: Polylactide/polyamide11 , 2011 .

[18]  Takashi Inoue,et al.  Structure-properties of super-tough PLA alloy with excellent heat resistance , 2010 .

[19]  T. Lodge,et al.  Two Calorimetric Glass Transitions in Miscible Blends Containing Poly(ethylene oxide) , 2008 .

[20]  Yongjin Li,et al.  Toughening of polylactide by melt blending with a biodegradable poly(ether)urethane elastomer. , 2007, Macromolecular bioscience.

[21]  Y. Grohens,et al.  Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor? , 2006 .

[22]  E. Piorkowska,et al.  Plasticization of poly(L-lactide) with poly(propylene glycol). , 2006, Biomacromolecules.

[23]  T. Liang,et al.  Nanoindentation studies on Nylon 11/clay nanocomposites , 2006 .

[24]  Mitsuhiro Shibata,et al.  Mechanical properties, morphology, and crystallization behavior of blends of poly(l-lactide) with poly(butylene succinate-co-l-lactate) and poly(butylene succinate) , 2006 .

[25]  P. Dubois,et al.  Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo‐modification on the physico‐chemical properties , 2006 .

[26]  M. Wolcott,et al.  Study of biodegradable polylactide/poly(butylene adipate-co-terephthalate) blends. , 2006, Biomacromolecules.

[27]  John Rose,et al.  The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA. , 2005, Biomaterials.

[28]  M. Hillmyer,et al.  The influence of block copolymer microstructure on the toughness of compatibilized polylactide/polyethylene blends , 2004 .

[29]  T. D. Fornes,et al.  Structure and Properties of Nanocomposites Based on Nylon-11 and -12 Compared with Those Based on Nylon-6 , 2004 .

[30]  A. Hiltner,et al.  Crystallization and phase separation in blends of high stereoregular poly(lactide) with poly(ethylene glycol) , 2003 .

[31]  J. Kim,et al.  Interfacial Tension Measurement of a Reactive Polymer Blend by the Neumann Triangle Method , 2000 .

[32]  G. Michler,et al.  Micromechanical deformation processes in toughened and particle filled semicrystalline polymers: Part 2. model representation for micromechanical deformation processes , 1998 .

[33]  G. Michler,et al.  Micromechanical deformation processes in toughened and particle-filled semicrystalline polymers: Part 1. Characterization of deformation processes in dependence on phase morphology , 1998 .

[34]  R. Gross,et al.  Citrate esters as plasticizers for poly(lactic acid) , 1997 .

[35]  D. Grijpma,et al.  High molecular weight poly(l-lactide) and poly(ethylene oxide) blends: thermal characterization and physical properties , 1996 .

[36]  G. Groeninckx,et al.  Cavitation versus debonding during deformation of rubber-modified poly(vinyl chloride) , 1995 .

[37]  A. Yee,et al.  Interfacial adhesion and toughening mechanisms in an alloy of polycarbonate/polyethylene , 1992 .