Effects of Laser Beam Parameters on Bendability and Microstructure of Stainless Steel in Three-Dimensional Laser Forming

[1]  Young Hoon Moon,et al.  Forced Circulation of Nitrogen Gas for Accelerated and Eco-Friendly Cooling of Metallic Parts , 2019, Applied Sciences.

[2]  Todd Palmer,et al.  Solidification Map of a Nickel-Base Alloy , 2013, Metallurgical and Materials Transactions A.

[3]  Woo,et al.  Analysis of Melt-Pool Behaviors during Selective Laser Melting of AISI 304 Stainless-Steel Composites , 2019, Metals.

[4]  I. Solomon,et al.  Deformation induced martensite in AISI 316 stainless steel , 2010 .

[5]  C. J. Tyne,et al.  Analytical model for prediction of sidewall curl during stretch-bend sheet metal forming , 2008 .

[6]  Y. Moon,et al.  Laser bendability of SUS430/C11000/SUS430 laminated composite and its constituent layers , 2016, Metals and Materials International.

[7]  Chester J. Van Tyne,et al.  Discrete layer hydroforming of three-layered tubes , 2013 .

[8]  S. H. Lee,et al.  Feasibility of underwater laser forming of laminated metal composites , 2018 .

[9]  Y. Yao,et al.  The Effects of Laser Forming on NiTi Superelastic Shape Memory Alloys , 2010 .

[10]  Y. Moon,et al.  Analysis on selective laser melting of WC-reinforced H13 steel composite powder by finite element method , 2019, Advances in Mechanical Engineering.

[11]  A. Zakaria,et al.  Investigation of material specifications changes during laser tube bending and its influence on the modification and optimization of analytical modeling , 2017 .

[12]  Hongtao Ding,et al.  Effect of confinement on surface modification for laser peen forming without protective coating , 2016 .

[13]  Y. Moon,et al.  Characterization of laser bending of SUS304L/C11000 clad sheets , 2019, Journal of Mechanical Science and Technology.

[14]  Young Hoon Moon,et al.  Selective laser melting of Fe-Ni-Cr layer on AISI H13 tool steel , 2009 .

[15]  Y. Moon,et al.  Selective laser melting of AISI 304 stainless steel composites reinforced by Al2O3 and eutectic mixture of Al2O3–ZrO2 powders , 2019, Materials Science and Engineering: A.

[16]  R. Rogge,et al.  Experimental study of residual stresses in laser clad AISI P20 tool steel on pre-hardened wrought P20 substrate , 2010 .

[17]  Y. Moon,et al.  Characterization of deposited layer fabricated by direct laser melting process , 2013, Metals and Materials International.

[18]  Y. Moon,et al.  Flow characteristics of aluminum coated boron steel in hot press forming , 2009 .

[19]  Young Hoon Moon,et al.  Functionally graded properties in directed-energy-deposition titanium parts , 2018, Optics & Laser Technology.

[20]  Y. Moon,et al.  Evolution of microstructure and mechanical properties of SUS430/C11000/SUS430 composites during the laser-forming process , 2017, Metals and Materials International.

[21]  H. Ezatpour,et al.  Microstructure and mechanical properties evolution of 6061 aluminum alloy formed by forward thixoextrusion process , 2013 .

[22]  Joseph William Newkirk,et al.  Grain Size Effects in Selective Laser Melted Fe-Co-2V , 2019, Applied Sciences.

[23]  C. J. Tyne,et al.  Characterization of deformation processing maps of 304L stainless steel based on compressive and tensile flow curves , 2019 .

[24]  Y. Moon,et al.  A double raster laser scanning strategy for rapid die-less bending of 3D shape , 2019, Journal of Materials Research and Technology.

[25]  Jin Cheng,et al.  Process Design of Laser Forming for Three-Dimensional Thin Plates , 2004 .

[26]  C. J. Tyne,et al.  Deformation analysis for cold rolling of Al-Cu double layered sheet by physical modeling and finite element method , 2013, Metals and Materials International.

[27]  Xianfan Xu,et al.  High Precision Microscale Bending by Pulsed and CW Lasers , 2003 .

[28]  Li Jun Yang,et al.  Surface characteristic of stainless steel sheet after pulsed laser forming , 2010 .

[29]  D. Celentano,et al.  Sensitization of AISI 302 stainless steel during low-power laser forming , 2010 .