Analysis of flexibility requirements under uncertain environments

Purpose – In the complex environment of manufacturing system, it is proper to design a production system which meets the market requirements in the most economical and competitive manner. Flexible manufacturing system (FMS) is one of the options to meet the uncertainty in demand and high variety of products. This paper aims to review the definition, classification, and measurement of manufacturing flexibility concerned with manufacturing flexibility management.Design/methodology/approach – The selection process consists of the synthesis and critical evaluation of the concepts put forward in the extant literature. As a consequence of this process, three primary flexibility dimensions are identified: volume, variety and machine. Simulation approach is used to study the behavior of FMS under different demand scenarios and levels of flexibility.Findings – Four hypotheses are tested in five different flexibility levels. The following conclusions are obtained from the study. For any flexibility level, as the tr...

[1]  William C. Jordan,et al.  Principles on the benefits of manufacturing process flexibility , 1995 .

[2]  Paul M. Swamidass,et al.  Manufacturing strategy, environmental uncertainty and performance: a path analytic model , 1987 .

[3]  David P. Christy,et al.  An investigation of the effect of machine flexibility and number of part families on system performance , 1992 .

[4]  Hitoshi Tsubone,et al.  A Comparison Between Machine Flexibility and Routing Flexibility , 1999 .

[5]  P. Swamidass.  Manufacturing strategy: Its assessment and practice , 1986 .

[6]  D. Gerwin.  Manufacturing flexibility: a strategic perspective , 1993 .

[7]  Yash P. Gupta,et al.  Flexibility of manufacturing systems: Concepts and measurements , 1989 .

[8]  Nigel Slack,et al.  The Flexibility of Manufacturing Systems , 1987 .

[9]  S. Vickery,et al.  Supply Chain Flexibility: An Empirical Study , 1999 .

[10]  Stanley B. Gershwin,et al.  Flow optimization in flexible manufacturing systems , 1985 .

[11]  Donald Gerwin,et al.  An agenda for research on the flexibility of manufacturing processes , 1987 .

[12]  Mark Pagell,et al.  A multiple-method study of environmental uncertainty and manufacturing flexibility , 1999 .

[13]  Manoj K. Malhotra,et al.  A theoretical framework for analyzing the dimensions of manufacturing flexibility , 1999 .

[14]  Diwakar Gupta,et al.  A framework for understanding flexibility of manufacturing systems , 1989 .

[15]  Erol Taymaz,et al.  Types of flexibility in a single-machine production system , 1989 .

[16]  Paul G. Ranky.  The design and operation of FMS : flexible manufacturing systems , 1983 .

[17]  Chen-Hua Chung,et al.  Effects of loading and routeing decisions on performance of flexible manufacturing systems , 1991 .

[18]  Stefano Tonchia,et al.  Manufacturing flexibility: A literature review , 1998 .

[19]  Dragutin M. Zelenović,et al.  Flexibility—a condition for effective production systems , 1982 .

[20]  Saif Benjaafar,et al.  Models for performance evaluation of flexibility in manufacturing systems , 1994 .

[21]  Subhash Wadhwa,et al.  Flexibility: an emerging meta-competence for managing high technology , 2000, Int. J. Technol. Manag..

[22]  Ifs Ltd.,et al.  Proceedings of the 1st International Conference on Flexible Manufacturing Systems : Brighton, U.K., 20-22, October 1982 , 1982 .

[23]  J. Ettlie,et al.  Flexibility Ratios and Manufacturing Strategy , 1994 .

[24]  Percy H. Brill,et al.  On measures of flexibility in manufacturing systems , 1989 .

[25]  Sanchoy K. Das,et al.  Investigations into the impact of flexibility on manufacturing performance , 1993 .

[26]  S. Wadhwa,et al.  Modeling FMS with decision Petri nets , 1989 .

[27]  D. Upton.  The Management of Manufacturing Flexibility , 1994 .

[28]  R. Hayes.  Restoring our competitive edge , 1984 .

[29]  Colin L. Moodie,et al.  Flexibility and manufacturing system design: An experimental investigation , 2000 .

[30]  Tom R. Burns,et al.  The Management of Innovation. , 1963 .

[31]  Andrew Kusiak,et al.  Flexible Manufacturing Systems: A Structural Approach , 1985 .

[32]  Percy H. Brill,et al.  Measurement of adaptivity and flexibility in production systems , 1990 .

[33]  A. Raturi,et al.  Sources of volume flexibility and their impact on performance , 2002 .

[34]  Young K. Son,et al.  Economic measure of productivity, quality and flexibility in advanced manufacturing systems , 1987 .

[35]  Sten-Olof Gustavsson,et al.  Flexibility and productivity in complex production processes , 1984 .

[36]  Charles H. Fine,et al.  An Empirical Study of Manufacturing Flexibility in Printed Circuit Board Assembly , 1996, Oper. Res..

[37]  N. Slack.  Flexibility as a Manufacturing Objective , 1983 .

[38]  Suresh P. Sethi,et al.  Flexibility in manufacturing: A survey , 1990 .

[39]  A. Roth,et al.  A taxonomy of manufacturing strategies , 1994 .