Microstructures and mechanical properties of directionally solidified Ni-25%Si full lamellar in situ composites

[1]  Binggang Zhang,et al.  The formation of full lamellar structures from Ni-25 at% Si melts , 2016 .

[2]  Yanfei Gao,et al.  A tale of two mechanisms: Strain-softening versus strain-hardening in single crystals under small stressed volumes , 2016 .

[3]  H. Hou,et al.  First-principles study of the nickel–silicon binary compounds under pressure , 2015 .

[4]  R. Cochrane,et al.  Lamella structure formation in drop-tube processed Ni–25.3 at.% Si alloy , 2014 .

[5]  J. Cormier,et al.  Measurement of the effective γ/γ′ lattice mismatch during high temperature creep of Ni-based single crystal superalloy , 2013 .

[6]  H. Fu,et al.  Microstructure and properties of Ni–Ni3Si composites by directional solidification , 2012 .

[7]  R. Cochrane,et al.  The formation of regular αNi-γ(Ni31Si12) eutectic structures from undercooled Ni–25 at.% Si melts , 2012 .

[8]  H. Fu,et al.  Microstructure and room temperature fracture toughness of directionally solidified NiAl–Mo eutectic in situ composites , 2012 .

[9]  Zhe-feng Zhang,et al.  General relationship between strength and hardness , 2011 .

[10]  Ruirun Chen,et al.  Directional solidification of Ti–49 at.%Al alloy , 2011 .

[11]  Y. Kaneno,et al.  The effect of second-phase dispersions on mechanical property of Ni3Si based multi-phase intermetallic alloys , 2008 .

[12]  P. L. Ferrandini,et al.  Microstructure and mechanical behavior of in situ Ni–Ni3Si composite , 2007 .

[13]  M. Gonçalves,et al.  Growth and solid/solid transformation in a Ni–Si eutectic alloy , 2005 .

[14]  K. Fujiwara,et al.  Growth of multicrystalline Si with controlled grain boundary configuration by the floating zone technique , 2005 .

[15]  Y. Kaneno,et al.  The effect of Cr addition on mechanical and chemical properties of Ni3Si alloys , 2002 .

[16]  R. Caram,et al.  Effect of the growth parameters on the Ni-Ni3Si eutectic microstructure , 2002 .

[17]  Seetharama C. Deevi,et al.  Emerging applications of intermetallics , 2000 .

[18]  E. Schulson,et al.  Strength, hardness and fracture toughness of a complex nickel silicide containing ductile phase particles , 1995, Journal of Materials Science.

[19]  D. R. Johnson,et al.  Processing and mechanical properties of in-situ composites from the NiAlCr and the NiAl(Cr,Mo) eutectic systems , 1995 .

[20]  M. C. Shaw,et al.  Cracking and damage mechanisms in ceramic/metal multilayers , 1993 .

[21]  M. Ashby,et al.  Flow characteristics of highly constrained metal wires , 1989 .

[22]  R. Fleischer.  High-strength, high-temperature intermetallic compounds , 1987 .