Cyclic operation of molten-salt thermal energy storage in thermoclines for solar power plants

The cyclic operation of molten-salt thermal energy storage thermoclines for solar thermal power plants is systematically investigated. A comprehensive, two-temperature model is first developed for the cyclic operation of a thermocline operating with a commercially available molten salt as the heat transfer fluid and quartzite rock as the filler. Volume-averaged mass and momentum equations are employed, with the Brinkman–Forchheimer extension to the Darcy law used to model the porous-medium resistance. Energy equations for the molten salt and the filler are coupled by an interstitial Nusselt number representing the heat transfer between the phases. A finite-volume approach is employed to solve the governing equations. The model is validated against experiments from the literature and then used to systematically study the cyclic behavior of the thermocline thermal storage system. Thermal characteristics including temperature profiles and cycle efficiency are explored. Guidelines are developed for designing the dimensions and molten salt flow rates for solar thermocline systems of different power capacities. The cycle efficiency is found to be improved at smaller melt Reynolds numbers, larger length ratios (molten salt flow distance in a half-cycle to the filler particle diameter) and larger tank heights. The filler particle diameter and the tank volume are found to strongly influence the cycle efficiency.

[1]  Peiwen Li,et al.  General volume sizing strategy for thermal storage system using phase change material for concentrated solar thermal power plant , 2015 .

[2]  J. Koh,et al.  Analysis of Cooling Effectiveness for Porous Material in a Coolant Passage , 1974 .

[3]  A. Mawire,et al.  Simulated performance of storage materials for pebble bed thermal energy storage (TES) systems , 2009 .

[4]  S. Garimella,et al.  Molten-salt thermal energy storage in thermoclines under different environmental boundary conditions , 2010 .

[5]  K. Nithyanandam,et al.  Analysis of a latent thermocline storage system with encapsulated phase change materials for concentrating solar power , 2014 .

[6]  K. Muralidhar,et al.  Energy storage in fluid saturated porous media subjected to oscillatory flow , 2009 .

[7]  John W. Kelton,et al.  Testing of Thermocline Filler Materials and Molten-Salt Heat Transfer Fluids for Thermal Energy Storage Systems in Parabolic Trough Power Plants , 2004 .

[8]  Henry Price,et al.  A Parabolic Trough Solar Power Plant Simulation Model , 2003 .

[9]  J. Koh,et al.  Enhancement of Cooling Effectiveness by Porous Materials in Coolant Passage , 1975 .

[10]  A. El-sebaii,et al.  Year round performance of double pass solar air heater with packed bed , 2007 .

[11]  Min Gao,et al.  Decision framework of solar thermal power plant site selection based on linguistic Choquet operator , 2014 .

[12]  D. E. Beasley,et al.  Transient response of a packed bed for thermal energy storage , 1983 .

[13]  Suresh V. Garimella,et al.  Thermal analysis of solar thermal energy storage in a molten-salt thermocline , 2010 .

[14]  Chao Xu,et al.  Dynamic thermal performance analysis of a molten-salt packed-bed thermal energy storage system using PCM capsules , 2014 .

[15]  Gregory J. Kolb,et al.  Performance Analysis of Thermocline Energy Storage Proposed for the 1 MW Saguaro Solar Trough Plant , 2006 .

[16]  E. Gonzo.  Estimating correlations for the effective thermal conductivity of granular materials , 2002 .

[17]  A. Gosman,et al.  Solution of the implicitly discretised reacting flow equations by operator-splitting , 1986 .

[18]  X. Py,et al.  Corrosion effects between molten salts and thermal storage material for concentrated solar power plants , 2012 .

[19]  Runhua Jiang,et al.  Thermocline stability criterions in single-tanks of molten salt thermal energy storage , 2012 .

[20]  Suresh V. Garimella,et al.  An Integrated Thermal and Mechanical Investigation of Molten-Salt Thermocline Energy Storage , 2011 .

[21]  Zhifeng Wang,et al.  Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system , 2012 .

[22]  H. Johnstone,et al.  Heat and mass transfer in packed beds , 1955 .

[23]  J. Hyun,et al.  Transient cool-down of a porous medium in pulsating flow , 1999 .

[24]  Miguel J. Prieto,et al.  A Novel Modeling of Molten-Salt Heat Storage Systems in Thermal Solar Power Plants , 2014 .

[25]  D. Kearney,et al.  Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field , 2003 .

[26]  J. Pacheco,et al.  DEVELOPMENT OF A MOLTEN-SALT THERMOCLINE THERMAL STORAGE SYSTEM FOR PARABOLIC TROUGH PLANTS , 2001 .

[27]  Ashmore Mawire,et al.  A feedforward IMC structure for controlling the charging temperature of a TES system of a solar cooker , 2008 .

[28]  J. Fukai,et al.  Thermal conductivity enhancement of energy storage media using carbon fibers , 2000 .