Time synchronization concerns in substation automation system

One of the main problems in mixing old and new IEC 61850 devices in the same substation automation system is related to the network-based time synchronization. The IEC61850 defines two different protocols for distributing time in Station and Process Bus: SNTP and IEEE1588 PTP. The two protocols have almost different time representations and synchronization schemes. When an old IEC61850 device with SNTP has to be integrated into new substations with PTP-compliant network infrastructure, time gateways may be required. The paper discusses the time synchronization concerns in a typical Substation Automation System and analyzes the performance of a compact Time Gateway; it is a transparent, two-ports, device which is inserted in the last network link between the switch and the end device. The tests have been carried out by means of an embedded prototype based on FPGA. The experimental results show the applicability of the Time Gateway concepts, giving useful hints on the trade off between synchronization accuracy and device complexity.

[1]  Kevin B. Stanton,et al.  Hardware Assisted Precision Time Protocol . Design and case study , 2008 .

[2]  Pedro Moreira,et al.  White rabbit: Sub-nanosecond timing distribution over ethernet , 2009, 2009 International Symposium on Precision Clock Synchronization for Measurement, Control and Communication.

[3]  David L. Mills.  Improved algorithms for synchronizing computer network clocks , 1994, SIGCOMM 1994.

[4]  Alessandra Flammini,et al.  Applying PTP-to-SNTP time-gateway to IEC61850 systems , 2011, ETFA2011.

[5]  Gunnar Prytz,et al.  QoS in switched Industrial Ethernet , 2009, 2009 IEEE Conference on Emerging Technologies & Factory Automation.

[6]  Daniele Marioli,et al.  A Distributed Instrument for Performance Analysis of Real-Time Ethernet Networks , 2008, IEEE Transactions on Industrial Informatics.

[7]  Cristian Marinescu,et al.  Design and implementation of a PTP clock infrastructure for the Linux kernel , 2010, 2010 IEEE International Symposium on Precision Clock Synchronization for Measurement, Control and Communication.

[8]  Alessandra Flammini,et al.  Architecture of an embedded time gateway between PTP and SNTP , 2011, 2011 6th IEEE International Symposium on Industrial and Embedded Systems.

[9]  M. Branicky,et al.  Design Considerations for Software Only Implementations of the IEEE 1588 Precision Time Protocol , 2005 .