Tensile fracture propagation and acoustic emission activity in sandstone: The effect of loading rate

[1]  L. M. Barker.  Theory for determining KIc from small, non-LEFM specimens, supported by experiments on aluminum , 1979 .

[2]  B. Atkinson,et al.  1 – INTRODUCTION TO FRACTURE MECHANICS AND ITS GEOPHYSICAL APPLICATIONS , 1987 .

[3]  Teng-fong Wong,et al.  MICROMECHANICS OF FAULTING IN WESTERLY GRANITE , 1982 .

[4]  S. Stanchits,et al.  Source analysis of acoustic emissions in Aue granite cores under symmetric and asymmetric compressive loads , 1998 .

[5]  Steven D. Glaser,et al.  Acoustic emissions produced by discrete fracture in rock Part 1—Source location and orientation effects , 1992 .

[6]  Steven D. Glaser,et al.  Acoustic emissions produced by discrete fracture in rock part 2—Kinematics of crack growth during controlled Mode I and Mode II loading of rock , 1992 .

[7]  K. Kusunose,et al.  Failure zone development in andesite as observed from acoustic emission locations and velocity changes , 1995 .

[8]  W. F. Brace,et al.  A note on brittle crack growth in compression , 1963 .

[9]  B. Atkinson.  Subcritical crack growth in geological materials , 1984 .

[10]  B. Atkinson.  Fracture Mechanics of Rock , 1987 .

[11]  Ove Stephansson,et al.  Effect of loading rate on Mode I fracture toughness, roughness and micromechanics of sandstone , 2003 .

[12]  Joseph F Labuz,et al.  Characteristic strength of quasi-brittle materials , 1998 .

[13]  S. Melin.  When does a crack grow under mode II conditions? , 1986, International Journal of Fracture.

[14]  Finn Ouchterlony,et al.  Suggested methods for determining the fracture toughness of rock , 1988 .

[15]  Per-Arne Lindqvist,et al.  Effects of loading rate on rock fracture , 1999 .

[16]  Joseph F Labuz,et al.  Acoustic emission at failure in quasi-brittle materials , 2001 .

[17]  B. Lawn.  Fracture of Brittle Solids by Brian Lawn , 1993 .

[18]  D. Lockner,et al.  Nucleation and growth of faults in brittle rocks , 1994 .

[19]  F. Ouchterlony.  On the background to the formulae and accuracy of rock fracture toughness measurements using ISRM standard core specimens , 1989 .

[20]  Joseph F Labuz,et al.  Measurement of the intrinsic process zone in rock using acoustic emission , 1998 .

[21]  George T. Hahn,et al.  Influence of microstructure on fracture propagation in rock , 1973 .