Improving the performance of a heat pipe evacuated solar water collector by using a magnetic NiFe2O4/water nanofluid

[1]  Y. Man,et al.  Energy consumption and carbon emissions forecasting for industrial processes: Status, challenges and perspectives , 2023, Renewable and Sustainable Energy Reviews.

[2]  Azim Doğuş Tuncer,et al.  A new approach for environmental analysis of vapor compression refrigeration systems: Environmental impact index , 2023, Thermal Science and Engineering Progress.

[3]  Saad M. Al-Mashat,et al.  Evaluation of Convective Heat Transfer and Natural Circulation in an Evacuated Tube Solar Collector , 2023, Journal of Engineering.

[4]  Azim Doğuş Tuncer,et al.  Enhancing the Performance of an Unglazed Solar Air Collector Using Mesh Tubes and Fe3O4 Nano-Enhanced Absorber Coating , 2023, SSRN Electronic Journal.

[5]  F. Afshari,et al.  Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids , 2023, International Journal of Numerical Methods for Heat & Fluid Flow.

[6]  Azim Doğuş Tuncer,et al.  Experimental Evaluation of a Photovoltaic/Thermal Air Heater with Metal Mesh-Integrated Thermal Energy Storage System , 2023, Energies.

[7]  Ceylin Şirin,et al.  A review on building-integrated photovoltaic/thermal systems for green buildings , 2023, Applied Thermal Engineering.

[8]  E. Manay,et al.  Experimental and numerical study on air-to-nanofluid thermoelectric cooling system using novel surface-modified Fe3O4 nanoparticles , 2023, Microfluidics and Nanofluidics.

[9]  Ataollah Khanlari,et al.  Investigating the effects of using MgO-CuO/water hybrid nanofluid in an evacuated solar water collector: A comprehensive survey , 2023, Thermal Science and Engineering Progress.

[10]  Ceylin Şirin,et al.  Performance Analysis and Identification of an Indirect Photovoltaic Thermal Dryer with Aluminum Oxide Nano-Embedded Thermal Energy Storage Modification , 2023, Sustainability.

[11]  Azim Doğuş Tuncer,et al.  Numerical and experimental investigation for enhancing thermal performance of a concentric heat exchanger using different scenarios , 2023, International Journal of Numerical Methods for Heat & Fluid Flow.

[12]  A. Tiwari,et al.  Performance evaluation of evacuated tube solar collector using boron nitride nanofluid , 2022, Sustainable Energy Technologies and Assessments.

[13]  M. Sheikholeslami,et al.  Modeling of evacuated tube solar collector involving longitudinal fins and nanofluids , 2022, Sustainable Energy Technologies and Assessments.

[14]  J. M. Belman-Flores,et al.  Numerical analysis of the thermo-hydraulic performance and entropy generation rate of a water-in-glass evacuated tube solar collector using TiO2 water-based nanofluid and only water as working fluids , 2022, Renewable Energy.

[15]  T. V. Arjunan,et al.  Utilization of zinc-ferrite/water hybrid nanofluids on thermal performance of a flat plate solar collector—a thermal modeling approach , 2022, Environmental Science and Pollution Research.

[16]  D. Linke,et al.  Nanoparticle classification, physicochemical properties, characterization, and applications: a comprehensive review for biologists , 2022, Journal of Nanobiotechnology.

[17]  M. Sharafeldin,et al.  Investigation of the effect of hybrid CuO-Cu/water nanofluid on the solar thermal energy storage system , 2022, Journal of Energy Storage.

[18]  F. Cui,et al.  Energy and exergy assessment of evacuated tube solar collector using water, Fe3O4 nanofluid and Fe3O4/MWCNT hybrid nanofluid , 2022, Process Safety and Environmental Protection.

[19]  F. Afshari,et al.  Thermal analysis of Fe3O4/water nanofluid in spiral and serpentine mini channels by using experimental and theoretical models , 2022, International Journal of Environmental Science and Technology.

[20]  Ceylin Şirin,et al.  Enhancing the performance of a greenhouse drying system by using triple-flow solar air collector with nano-enhanced absorber coating , 2022, Case Studies in Thermal Engineering.

[21]  A. Alsabery,et al.  A review on applications and techniques of improving the performance of heat pipe-solar collector systems , 2022, Solar Energy.

[22]  H. Kargarsharifabad,et al.  An integrated solar desalination with evacuated tube heat pipe solar collector and new wind ventilator external condenser , 2022, Sustainable Energy Technologies and Assessments.

[23]  A. Abdel‐Rehim,et al.  The performance response of a heat pipe evacuated tube solar collector using MgO/MWCNT hybrid nanofluid as a working fluid , 2022, Case Studies in Thermal Engineering.

[24]  M. Sharifpur,et al.  Improvement of the energy and exergy efficiencies of the parabolic solar collector equipped with a twisted turbulator using SWCNT-Cu/water two-phase hybrid nanofluid , 2022, Sustainable Energy Technologies and Assessments.

[25]  Ceylin Şirin,et al.  Experimental analysis of combined utilization of CuO nanoparticles in latent heat storage unit and absorber coating in a single-slope solar desalination system , 2022, Solar Energy.

[26]  Gyula Gróf,et al.  A CFD Study on Heat Transfer Performance of SiO2-TiO2 Nanofluids under Turbulent Flow , 2022, Nanomaterials.

[27]  Yan Liu,et al.  Heat collection performance analysis of corrugated flat plate collector: An experimental study , 2022, Renewable Energy.

[28]  W. Jamshed,et al.  Thermal Characterization of Coolant Maxwell Type Nanofluid Flowing in Parabolic Trough Solar Collector (PTSC) Used Inside Solar Powered Ship Application , 2021, Coatings.

[29]  Ceylin Şirin,et al.  Energy and exergy analysis of a hybrid photovoltaic/thermal-air collector modified with nano-enhanced latent heat thermal energy storage unit , 2021, Journal of Energy Storage.

[30]  M. Sheikholeslami,et al.  Entropy generation and thermal analysis of nanofluid flow inside the evacuated tube solar collector , 2021, Scientific Reports.

[31]  H. Ali,et al.  Thermodynamic analysis and comparison of different absorption cycles driven by evacuated tube solar collector utilizing hybrid nanofluids , 2021 .

[32]  N. Mostafa,et al.  Performance analysis for an inclined tubular still desalination integrated with evacuated tube collector , 2021, Solar Energy.

[33]  K. Ismail,et al.  Comparative analysis of eccentric evacuated tube solar collector with circular and rectangular absorber working with nanofluid , 2021, Cleaner Engineering and Technology.

[34]  A. Eidan,et al.  Thermal performance of heat pipe evacuated tube solar collector integrated with different types of phase change materials at various location , 2021 .

[35]  I. V. Shevchuk,et al.  Unsteady convective heat transfer in nanofluids at instantaneous transition to film boiling , 2021 .

[36]  Devaraj Rangabashiam,et al.  Effect of Al_2O_3 and MgO nanofluids in heat pipe solar collector for improved efficiency , 2021, Applied Nanoscience.

[37]  S. R. Shabanian,et al.  A novel dual-diameter closed-loop pulsating heat pipe for a flat plate solar collector , 2021 .

[38]  Muhammad Ibrahim,et al.  Evaluating the energy efficiency of a parabolic trough solar collector filled with a hybrid nanofluid by utilizing double fluid system and a novel corrugated absorber tube , 2021, Journal of the Taiwan Institute of Chemical Engineers.

[39]  M. Afrand,et al.  Introducing two scenarios to enhance the vacuum U-tube solar collector efficiency by considering economic criterion , 2021, Journal of the Taiwan Institute of Chemical Engineers.

[40]  Z. Said,et al.  Recent progress on flat plate solar collectors and photovoltaic systems in the presence of nanofluid: A review , 2021, Journal of Cleaner Production.

[41]  Saeed Alqaed,et al.  Challenging of using CuO nanoparticles in a flat plate solar collector- Energy saving in a solar-assisted hot process stream , 2021, Journal of the Taiwan Institute of Chemical Engineers.

[42]  S. Mellouli,et al.  Numerical study of an Evacuated Tube Solar Collector incorporating a Nano-PCM as a latent heat storage system , 2021 .

[43]  G. Najafi,et al.  Nanofluids for flat plate solar collectors: Fundamentals and applications , 2021 .

[44]  M. Dehaj,et al.  Efficiency of the parabolic through solar collector using NiFe2O4/Water nanofluid and U-tube , 2021 .

[45]  A. Gopalan,et al.  Polyethylene Glycol Coated Magnetic Nanoparticles: Hybrid Nanofluid Formulation, Properties and Drug Delivery Prospects , 2021, Nanomaterials.

[46]  S. Vijayan,et al.  Thermal performance of an evacuated tube solar collector with inserted baffles for air heating applications , 2021 .

[47]  E. Çiftçi.  Distilled Water-Based AlN + ZnO Binary Hybrid Nanofluid Utilization in a Heat Pipe and Investigation of Its Effects on Performance , 2021, International Journal of Thermophysics.

[48]  S. Hosseini,et al.  Assessment of TiO2 water-based nanofluids with two distinct morphologies in a U type evacuated tube solar collector , 2021 .

[49]  Z. Said,et al.  Modification for helical turbulator to augment heat transfer behavior of nanomaterial via numerical approach , 2021 .

[50]  R. Kaushal,et al.  Experimental analysis of heat pipe based evacuated tube solar collector using graphene/ ethylene glycol-water nanofluids. , 2020, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[51]  A. Abdel‐Rehim,et al.  Energetic and exergetic analysis of a heat pipe evacuated tube solar collector using MWCNT/water nanofluid , 2020 .

[52]  H. M. Zaid,et al.  Characterization and Nanofluid Stability of CoFe2O4-APTES and CoFe2O4-PVA Nanoparticles , 2020, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences.

[53]  S. Nazari,et al.  Retrofitting a thermoelectric-based solar still integrated with an evacuated tube collector utilizing an antibacterial-magnetic hybrid nanofluid , 2020 .

[54]  R. Saidur,et al.  Thermal performance enhancement of a flat plate solar collector using hybrid nanofluid , 2020, Solar Energy.

[55]  M. Badri,et al.  Effects of using ferromagnetic hybrid nanofluid in an evacuated sweep-shape solar receiver , 2020, Journal of Thermal Analysis and Calorimetry.

[56]  G. Huminic,et al.  Study of the thermal conductivity of hybrid nanofluids: Recent research and experimental study , 2020 .

[57]  K. Sultan,et al.  An experimental investigation on the effect of hybrid Nano fluid (Al+Al2O3/distilled water) on the thermal efficiency of evacuated tube solar collector , 2020, IOP Conference Series: Materials Science and Engineering.

[58]  S. K. Verma,et al.  “Performance comparison of innovative spiral shaped solar collector design with conventional flat plate solar collector” , 2020 .

[59]  M. Ameri,et al.  Energy and exergy evaluation of the evacuated tube solar collector using Cu2O/water nanofluid utilizing ANN methods , 2020 .

[60]  Denis Karpov,et al.  Algorithm for Integrated Non-Destructive Diagnostics of Technical Condition of Structures of Buildings and Constructions Using the Thermogram Analysis , 2020, E3S Web of Conferences.

[61]  Huaqing Xie,et al.  Enhanced photothermal conversion properties of magnetic nanofluids through rotating magnetic field for direct absorption solar collector. , 2019, Journal of colloid and interface science.

[62]  G. Huminic,et al.  A numerical approach on hybrid nanofluid behavior in laminar duct flow with various cross sections , 2019, Journal of Thermal Analysis and Calorimetry.

[63]  Gyula Gróf,et al.  Evacuated tube solar collector performance using copper nanofluid: Energy and environmental analysis , 2019, Applied Thermal Engineering.

[64]  Huaqing Xie,et al.  Photothermal efficiency enhancement of a nanofluid-based direct absorption solar collector utilizing magnetic nano-rotor , 2019, Energy Conversion and Management.

[65]  I. Uslu,et al.  Synthesis of boron and rare earth stabilized graphene doped polyvinylidene fluoride (PVDF) nanocomposite piezoelectric materials , 2019, Polymer Composites.

[66]  A. Sözen,et al.  Experimental and numerical study on enhancement of heat transfer characteristics of a heat pipe utilizing aqueous clinoptilolite nanofluid , 2019, Applied Thermal Engineering.

[67]  Arash Karimipour,et al.  Investigation of energy performance in a U-shaped evacuated solar tube collector using oxide added nanoparticles through the emitter, absorber and transmittal environments via discrete ordinates radiation method , 2019, Journal of Thermal Analysis and Calorimetry.

[68]  Honghyun Cho,et al.  Energy and exergy comparison of a flat-plate solar collector using water, Al2O3 nanofluid, and CuO nanofluid , 2019, Applied Thermal Engineering.

[69]  Rajat Gupta,et al.  Photo-thermal characteristics of hybrid nanofluids based on Therminol-55 oil for concentrating solar collectors , 2019, Applied Nanoscience.

[70]  Y. Du,et al.  Factors affecting the thermal performance of the flat plate solar collector using nanofluids: A review , 2019, Solar Energy.

[71]  Gyula Gróf,et al.  Efficiency of evacuated tube solar collector using WO3/Water nanofluid , 2019, Renewable Energy.

[72]  A. Sözen,et al.  Influences of bentonite-deionized water nanofluid utilization at different concentrations on heat pipe performance: An experimental study , 2019, Applied Thermal Engineering.

[73]  T. Ling,et al.  Thermal conductivity optimization and entropy generation analysis of titanium dioxide nanofluid in evacuated tube solar collector , 2018, Applied Thermal Engineering.

[74]  H. Ali,et al.  Thermal conductivity of hybrid nanofluids: A critical review , 2018, International Journal of Heat and Mass Transfer.

[75]  Jalal M. Jalil,et al.  Improving the performance of heat pipe-evacuated tube solar collector experimentally by using Al2O3 and CuO/acetone nanofluids , 2018, Solar Energy.

[76]  Angel Huminic,et al.  Hybrid nanofluids for heat transfer applications – A state-of-the-art review , 2018, International Journal of Heat and Mass Transfer.

[77]  A. K. Pandey,et al.  Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications , 2018, Applied Energy.

[78]  Gyula Gróf,et al.  Evacuated tube solar collector performance using CeO2/water nanofluid , 2018, Journal of Cleaner Production.

[79]  Durg Singh Chauhan,et al.  Performance analysis of hybrid nanofluids in flat plate solar collector as an advanced working fluid , 2018, Solar Energy.

[80]  A. Minea,et al.  Influence of hybrid nanofluids on the performance of parabolic trough collectors in solar thermal systems: Recent findings and numerical comparison , 2018 .

[81]  Jahar Sarkar,et al.  Discrete phase numerical model and experimental study of hybrid nanofluid heat transfer and pressure drop in plate heat exchanger , 2018 .

[82]  G. Nandan,et al.  Performance enhancement of a renewable thermal energy collector using metallic oxide nanofluids , 2018 .

[83]  Gyula Gróf,et al.  Experimental study on the performance of a flat-plate collector using WO3/Water nanofluids , 2017 .

[84]  I. V. Shevchuk,et al.  Mixed convection in a vertical circular microchannel , 2017 .

[85]  E. Bellos,et al.  Thermal analysis of parabolic trough collector operating with mono and hybrid nanofluids , 2017 .

[86]  K. H. Solangi,et al.  A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids. , 2017, Journal of colloid and interface science.

[87]  O. Mahian,et al.  Second law analysis of a nanofluid-based solar collector using experimental data , 2016, Journal of Thermal Analysis and Calorimetry.

[88]  Gianpiero Colangelo,et al.  Experimental test of an innovative high concentration nanofluid solar collector , 2015 .

[89]  G. Srivastava,et al.  Structural, magnetic, dielectric and optical properties of nickel ferrite nanoparticles synthesized by co-precipitation method , 2014 .

[90]  S. Etemad,et al.  Numerical Investigations of Heat Transfer Performance of Nanofluids in a Flat Plate Solar Collector , 2014 .

[91]  Yan Gao,et al.  Thermal performance and parameter analysis of a U-pipe evacuated solar tube collector , 2014 .

[92]  Kamran Siddiqui,et al.  Experimental study on the combined effects of inclination angle and insert devices on the performance of a flat-plate solar collector , 2014 .

[93]  Feng Zhao,et al.  Thermal performance of an open thermosyphon using nanofluid for evacuated tubular high temperature air solar collector , 2013 .

[94]  Yanmin Wang,et al.  Heat transfer enhancement by magnetic nanofluids—A review , 2013 .

[95]  Lacour M Ayompe,et al.  Thermal Performance Analysis of a Solar Water Heating System With Heat Pipe Evacuated Tube Collector Using Data From a Field Trial , 2013 .

[96]  Anuar Shahrani,et al.  Performance of Evacuated Tube Solar Collector using Water-Based Titanium Oxide Nanofluid , 2012 .

[97]  Vytautas Bučinskas,et al.  Analysis of a Flat-Plate Solar Collector , 2012 .

[98]  G. Huminic,et al.  Heat transfer characteristics in double tube helical heat exchangers using nanofluids , 2011 .

[99]  L. Colla,et al.  Experimental stability analysis of different water-based nanofluids , 2011, Nanoscale research letters.

[100]  Azim Doğuş Tuncer,et al.  Experimental investigation of a double-flow photovoltaic/thermal air collector with natural dolomite powder-embedded thermal energy storage unit , 2023, Journal of Energy Storage.

[101]  M. Farhadi,et al.  On the thermal performance of evacuated tube solar collector integrated with phase change material , 2022, Sustainable Energy Technologies and Assessments.

[102]  İpek Aytaç.  Experimental investigation on heat transfer performance of Fe2O3/water and Fe3O4/water nanofluids in a plate heat exchanger , 2022, Heat Transfer Research.

[103]  E. Manay,et al.  A Review Study On Factors Affecting the Stability of Nanofluids , 2022, Heat Transfer Research.

[104]  E. Manay,et al.  Surface Modification of Fe3O4 Nanoparticle for Preparing Stable Water-Based Nanofluid , 2022, Heat Transfer Research.

[105]  İpek Aytaç.  Determination of the thermal behavior of water-based Fe3O4 nanofluid using thermophysical property models , 2022, Heat Transfer Research.

[106]  F. Afshari,et al.  Effects of Nanoparticle Size on properties of Nanofluid and Heat Transfer Enhancement in Spiral Exchanger Using Turbulators , 2022, Nanoscience and Technology: An International Journal.

[107]  M. Sharifpur,et al.  Influence of using innovative turbulators on the exergy and energy efficacy of flat plate solar collector with DWCNTs-TiO2/water nanofluid , 2022, Sustainable Energy Technologies and Assessments.

[108]  E. Manay,et al.  PERFORMANCE ANALYSIS OF THERMO-ELECTRIC COOLING SYSTEMS EQUIPPED WITH SURFACE MODIFIED AND RECYCLED NANOFLUIDS , 2022, Journal of Enhanced Heat Transfer.

[109]  I. Singh,et al.  Experimental investigation of an evacuated tube collector solar air heater with helical inserts , 2021 .

[110]  M. Sheikholeslami,et al.  Performance of solar collector with turbulator involving nanomaterial turbulent regime , 2021 .

[111]  M. Pavlov,et al.  Determination of Surface Temperature and Moisture Fields of Structural Elements of Buildings by Thermal Imaging , 2021 .

[112]  H. Oztop,et al.  Numerical and experimental investigation of a double-pipe heat exchanger with SiO2 nano-additives , 2021, Heat Transfer Research.

[113]  D. Santos-Martín,et al.  Worldwide annual optimum tilt angle model for solar collectors and photovoltaic systems in the absence of site meteorological data , 2021, Applied Energy.

[114]  M. Pavlov,et al.  Features and results of assessment the thermal conductivity of building materials and products by the active method of thermal non-destructive testing , 2020, E3S Web of Conferences.

[115]  A. Sinitsyn,et al.  Thermal Method for Non-Destructive Control of Actual Coolant Mass Flow through a Heating Device , 2020, E3S Web of Conferences.

[116]  Ataollah Khanlari.  THE EFFECT OF UTILIZING Al2O3-SiO2/DEIONIZED WATER HYBRID NANOFLUID IN A TUBE-TYPE HEAT EXCHANGER , 2020 .

[117]  Gyula Gróf,et al.  Experimental investigation of flat plate solar collector using CeO2-water nanofluid , 2018 .

[118]  Arif Hepbasli,et al.  Heat transfer performance and exergy analyses of a corrugated plate heat exchanger using metal oxide nanofluids , 2014 .

[119]  Sayantan Mukherjee,et al.  Preparation and Stability of Nanofluids-A Review , 2013 .

[120]  M. Gürü,et al.  The effects of particle mass fraction and static magnetic field on the thermal performance of NiFe2O4 nanofluid in a heat pipe , 2022, International Journal of Thermal Sciences.

[121]  Azim Doğuş Tuncer,et al.  Upgrading the performance of shell and helically coiled heat exchangers with new flow path by using TiO2/water and CuO–TiO2/water nanofluids , 2022, International Journal of Thermal Sciences.