A QFT fault-tolerant control for electrohydraulic positioning systems

This paper describes the design and experimental evaluation of a fault-tolerant controller (FTC) for an electrohydraulic servo positioning system. The controller is required to retain the stability of the system under sensor failure or, in the presence of faults in servovalve and supply pump. A mathematical model describing the hydraulic actuator is derived in which sensor failures and component faults are captured as uncertainties in the model parameters. A robust controller is designed, using quantitative feedback theory (QFT), to maintain key properties of the closed-loop system, i.e., stability and disturbance rejection. The designed controller is easy to implement and no online tuning or adaptation is necessary. The feasibility of the controller was evaluated by implementing it on an experimental test rig. Experimental results demonstrate the effectiveness of the controller under abrupt sensor failures or incorrect supply pump pressures.

[1]  Paul M. Frank,et al.  Fault diagnosis in dynamic systems: theory and application , 1989 .

[2]  Victor A. Skormin,et al.  On-line diagnostics of a self-contained flight actuator , 1994 .

[3]  N. Sepehri,et al.  Designing robust force control of hydraulic actuators despite system and environmental uncertainties , 2001 .

[4]  Paul M. Frank,et al.  Analytical and Qualitative Model-based Fault Diagnosis - A Survey and Some New Results , 1996, Eur. J. Control.

[5]  Timothy N. Chang,et al.  Reliable control for systems with block diagonal feedback structure , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[6]  P B Arnold.  Flight Control System Reconfiguration Design Using Quantitative Feedback Theory. , 1984 .

[7]  Wei Wei,et al.  QFT-based robust/fault-tolerant flight control design for a remote pilotless vehicle , 2000 .

[8]  Isaac Horowitz,et al.  Quantitative feedback design theory : QFT , 1993 .

[9]  Jing Lin,et al.  Feature Extraction Based on Morlet Wavelet and its Application for Mechanical Fault Diagnosis , 2000 .

[10]  William R. Perkins,et al.  Design of reliable control systems , 1992 .

[11]  Michael B. Leahy,et al.  Robust model-based control: an experimental case study , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[12]  Richard L. Brunson,et al.  Linear Control System Analysis and Design , 1988, IEEE Transactions on Systems, Man, and Cybernetics.

[13]  Yu Jinghong,et al.  The Variation of Oil Effective Bulk Modulus With Pressure in Hydraulic Systems , 1994 .

[14]  Paul M. Frank,et al.  Fault Diagnosis in Dynamic Systems , 1993, Robotics, Mechatronics and Manufacturing Systems.

[15]  Osita D. I. Nwokah,et al.  A Digital Robust Controller for Cutting Force Control in the End Milling Process , 1997 .

[16]  A. Nazli Gundes.  Stability of feedback systems with sensor or actuator failures: analysis , 1992 .

[17]  Amit Shukla,et al.  Feedback design for robust tracking and robust stiffness in flight control actuators using a modified QFT technique , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).