Decomposition of process control agent during mechanical milling and its influence on displacement reactions in the Al-TiO2 system

[1]  Z. Cai,et al.  The mechanical milling of Al/TiO2 composite powders , 2004 .

[2]  W. M. Rainforth,et al.  The effect of heat treatment at 500–655 °C on the microstructure and properties of mechanically alloyed Al–Ti–O based material , 2003 .

[3]  R. M. L. Neto,et al.  An Investigation of the use of Stearic Acid as a Process Control Agent in High Energy Ball Milling of Nb-Al and Ni-Al Powder Mixtures , 2003 .

[4]  M. Zawrah,et al.  Effects of process-control agents on mechanical alloying of nanostructured aluminum alloys , 2003 .

[5]  K. Gerasimov,et al.  Ball temperatures during mechanical alloying in planetary mills , 2002 .

[6]  H. Rack,et al.  Influence of TiO2/Al ratio on reaction path during reactive infiltration of TiO2 by molten Al , 2002 .

[7]  C. Chao,et al.  Effect of heat treatments on In-Situ Al2O3/TiAl3 composites produced from squeeze casting of TiO2/A356 composites , 2002 .

[8]  Kojiro F. Kobayashi,et al.  Wear and oxidation resistance of Al2O3 particle dispersed Al3Ti composite with a nanostructure prepared by pulsed electric current sintering of mechanically alloyed powders , 2002 .

[9]  D. Ying,et al.  The Impact of Microstructure of High Energy Ball Milled Powders on the Reaction Kinetics , 2001 .

[10]  C. F. Feng,et al.  Formation of Al3Ti and Al2O3 from an Al–TiO2 system for preparing in-situ aluminium matrix composites , 2000 .

[11]  N. Welham.  Mechanical activation of the formation of an alumina—titanium trialuminide composite , 1998 .

[12]  D. M. Yang,et al.  Microstructural study of the interface reaction between titania whiskers and aluminum , 1997 .

[13]  Young-Won Kim,et al.  Gamma titanium aluminides , 1995 .

[14]  M. Flemings,et al.  In situ synthesis of TiC particulate-reinforced aluminum matrix composites , 1995 .

[15]  P. McCormick,et al.  Displacement reactions during mechanical alloying , 1990 .