Numerical methods for microstructural evolutions in laser additive manufacturing

Abstract Different methods are developed for simulation of microstructural evolution in metals and alloys subject to Laser Additive Manufacturing. The Monte Carlo (MC) method is combined with a new proposed two scales strategy for simulation of the solidification and the subsequent solid-state phase transformation in Ti–6Al–4V.The Cellular Automaton (CA) method shows its higher efficiency in comparison with MC method. Moore neighbor type with energy barrier is recommended for the CA simulation of grain growth of Al 6061. The phase field (PF) model shows that different temperature gradients lead to different columnar grains in different layers of Ti–32wt.%Nb. The computed structures are related to experimental observations.

[1]  C. Beckermann,et al.  Phase-field simulation of the columnar-to-equiaxed transition in alloy solidification , 2006 .

[2]  M. Grujicic,et al.  Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6 , 2016, Journal of Materials Science.

[3]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[4]  Shichao Xiu,et al.  Research on microstructure evolution of austenitization in grinding hardening by cellular automata simulation and experiment , 2017 .

[5]  Jun Xiong,et al.  Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures , 2017 .

[6]  Elizabeth A. Holm,et al.  Modeling the recrystallized grain size in single phase materials , 2011 .

[7]  Wenjiang Ding,et al.  Cellular automata simulation of grain growth in three dimensions based on the lowest-energy principle , 2006 .

[8]  S. Wolfram Computation theory of cellular automata , 1984 .

[9]  Zhe Sun,et al.  Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment. , 2017, Journal of the mechanical behavior of biomedical materials.

[10]  Z. Zhang,et al.  3D Monte Carlo simulation of grain growth in friction stir welding , 2018 .

[11]  Z. Zhang,et al.  Precipitation-Induced Grain Growth Simulation of Friction-Stir-Welded AA6082-T6 , 2017, Journal of Materials Engineering and Performance.

[12]  Y. Shibuta,et al.  Two-dimensional phase-field study of competitive grain growth during directional solidification of polycrystalline binary alloy , 2016 .

[13]  A. Karma Phase-field formulation for quantitative modeling of alloy solidification. , 2001, Physical review letters.

[14]  Vasily Ploshikhin,et al.  Three-dimensional modeling of the microstructure evolution during metal additive manufacturing , 2018 .

[15]  Nikolas Provatas,et al.  Phase-Field Methods in Materials Science and Engineering , 2010 .

[16]  Charlie C. L. Wang,et al.  The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..

[17]  Zhi-Qiang Feng,et al.  Monte Carlo simulation of polycrystalline microstructures and finite element stress analysis , 2014 .

[18]  S. Ahzi,et al.  Three-dimensional transient finite element analysis of the selective laser sintering process , 2009 .

[19]  Wei Sha,et al.  Titanium Alloys: Modelling of Microstructure, Properties and Applications , 2009 .

[20]  Hua-ming Wang,et al.  Microstructure and properties of a novel titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si manufactured by laser additive manufacturing , 2017 .

[21]  Xiaoping Zhou,et al.  The Simulation of Precipitation Evolutions and Mechanical Properties in Friction Stir Welding with Post-Weld Heat Treatments , 2017, Journal of Materials Engineering and Performance.

[22]  G. Gilmer,et al.  Computer Models of Crystal Growth , 1980, Science.

[23]  A. Karma,et al.  Quantitative phase-field model of alloy solidification. , 2004, Physical review. E, Statistical, nonlinear, and soft matter physics.

[24]  L. Sander,et al.  Multiscale kinetic Monte Carlo algorithm for simulating epitaxial growth , 2005, cond-mat/0504272.

[25]  C. Gandin,et al.  Probabilistic modelling of microstructure formation in solidification processes , 1993 .

[26]  Richard Penelle,et al.  Simulation of normal grain growth by cellular automata , 1996 .

[27]  Vimal Dhokia,et al.  Investigation of part distortions as a result of hybrid manufacturing , 2016 .

[28]  T. H. Kim,et al.  Austenite grain coarsening of V-microalloyed medium carbon steel during high frequency induction heating: Monte Carlo simulation study , 2013 .

[29]  Jieyu Zhang,et al.  CA method with machine learning for simulating the grain and pore growth of aluminum alloys , 2018 .

[30]  T. Takaki,et al.  Unexpected selection of growing dendrites by very-large-scale phase-field simulation , 2013 .

[31]  Vlachos,et al.  Kinetics of faceting of crystals in growth, etching, and equilibrium. , 1993, Physical review. B, Condensed matter.

[32]  Bozidar Sarler,et al.  A cellular automaton - finite volume method for the simulation of dendritic and eutectic growth in binary alloys using an adaptive mesh refinement , 2017, J. Comput. Phys..

[33]  Raymond G. Thompson,et al.  Real time-temperature models for Monte Carlo simulations of normal grain growth , 1996 .

[34]  Lars-Erik Lindgren,et al.  Flow stress model for IN718 accounting for evolution of strengthening precipitates during thermal treatment , 2014 .

[35]  R. Kobayashi Modeling and numerical simulations of dendritic crystal growth , 1993 .

[36]  P. Michaleris Modeling metal deposition in heat transfer analyses of additive manufacturing processes , 2014 .

[37]  Abhijit Chatterjee,et al.  An overview of spatial microscopic and accelerated kinetic Monte Carlo methods , 2007 .

[38]  Ranadip Acharya,et al.  Prediction of microstructure in laser powder bed fusion process , 2017 .

[39]  Li Hu,et al.  Investigation of primary static recrystallization in a NiTiFe shape memory alloy subjected to cold canning compression using the coupling crystal plasticity finite element method with cellular automaton , 2017 .

[40]  X. Zhan,et al.  Numerical simulation of β to α phase transformation in heat affected zone during welding of TA15 alloy , 2013 .

[41]  Matthias Markl,et al.  A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing , 2016 .

[42]  M. Grujicic,et al.  Prediction of the Grain-Microstructure Evolution Within a Friction Stir Welding (FSW) Joint via the Use of the Monte Carlo Simulation Method , 2015, Journal of Materials Engineering and Performance.

[43]  John W. Elmer,et al.  Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy , 2017 .

[44]  A. Karma,et al.  Growth competition of columnar dendritic grains: A phase-field study , 2015 .

[45]  V. Tikare,et al.  Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo , 2017 .

[46]  N. Metropolis,et al.  Equation of State Calculations by Fast Computing Machines , 1953, Resonance.

[47]  Uriel Martinez-Hernandez,et al.  Two-dimensional simulation of grain structure growth within selective laser melted AA-2024 , 2017 .

[48]  A. Karma,et al.  Phase-Field Simulation of Solidification , 2002 .

[49]  J. Wen,et al.  Monte Carlo grain growth modeling with local temperature gradients , 2017 .