Testing the resistance of single- and multi-walled carbon nanotubes to chemothermal oxidation used to isolate soots from environmental samples.

Quantification of natural and engineered carbon nanotubes (CNT) in the environment is urgently needed to study their occurrence and fate and to enable a proper risk assessment. Currently, such methods are lacking. Here, we tested the resistance of 15 structurally different CNTs to chemothermal oxidation at 375 degrees C (CTO-375), a method used to isolate soots from environmental samples. Depending on their structure, CNTs survived CTO-375 in proportions ranging from 26 to 93%. Standard addition of CNTs to soil and sediment yielded recoveries between 66 and 171%, demonstrating the capability of CTO-375 to isolate CNTs from complex environmental matrices. These data of pure and added CNTs correspond to recoveries obtained with "ordinary" soots under similar experimental conditions. Hence, soot fractions commonly isolated with CTO-375 from environmental matrices most probably encompass CNTs. Future work should attempt to enhance the method's selectivity, i.e., its capability to separate CNTs from other forms of soot.

[1]  M. Morandi,et al.  Nanoparticle‐induced platelet aggregation and vascular thrombosis , 2005, British journal of pharmacology.

[2]  P. Gschwend,et al.  Reinterpreting literature sorption data considering both absorption into organic carbon and adsorption onto black carbon. , 2003, Environmental science & technology.

[3]  M. Dresselhaus,et al.  Thermal stability and structural changes of double-walled carbon nanotubes by heat treatment , 2004 .

[4]  Ö. Gustafsson,et al.  Quantification of sedimentary black carbon using the chemothermal oxidation method: an evaluation of ex situ pretreatments and standard additions approaches , 2004 .

[5]  Y. Gogotsi,et al.  Elimination of D-band in Raman spectra of double-wall carbon nanotubes by oxidation , 2005 .

[6]  P. Walker,et al.  Kinetic studies of the oxidation of highly oriented pyrolytic graphite , 1972 .

[7]  John E. Anthony,et al.  Thermogravimetric Analysis of the Oxidation of Multiwalled Carbon Nanotubes: Evidence for the Role of Defect Sites in Carbon Nanotube Chemistry , 2002 .

[8]  A. Rao,et al.  Continuous production of aligned carbon nanotubes: a step closer to commercial realization , 1999 .

[9]  R. Smalley,et al.  Structural characterization and diameter-dependent oxidative stability of single wall carbon nanotubes synthesized by the catalytic decomposition of CO , 2001 .

[10]  L. Murr,et al.  A TEM analysis of nanoparticulates in a Polar ice core , 2004 .

[11]  P. Walker,et al.  Importance of carbon active sites in the gasification of coal chars , 1983 .

[12]  Haihui Ye,et al.  Effect of Thermal Treatment on the Structure of Multi-walled Carbon Nanotubes , 2006 .

[13]  Shimin Zhang,et al.  Functionalized carbon nanotubes containing isocyanate groups , 2004 .

[14]  B. Nowack,et al.  Occurrence, behavior and effects of nanoparticles in the environment. , 2007, Environmental pollution.

[15]  W. P. Ball,et al.  An evaluation of thermal resistance as a measure of black carbon content in diesel soot, wood char, and sediment , 2004 .

[16]  M. Meyyappan,et al.  CO2 adsorption in single-walled carbon nanotubes , 2003 .

[17]  S. Shinkai,et al.  Colloidal Nature of Single-Walled Carbon Nanotubes in Electrolyte Solution: The Schulze−Hardy Rule , 2001 .

[18]  A. Koelmans,et al.  Extensive sorption of organic compounds to black carbon, coal, and kerogen in sediments and soils: mechanisms and consequences for distribution, bioaccumulation, and biodegradation. , 2005, Environmental science & technology.

[19]  R. Aitken,et al.  Manufacture and use of nanomaterials: current status in the UK and global trends. , 2006, Occupational medicine.

[20]  Ryan C. Templeton,et al.  Life-cycle effects of single-walled carbon nanotubes (SWNTs) on an estuarine meiobenthic copepod. , 2006, Environmental science & technology.

[21]  Jing Sun,et al.  Production of aqueous colloidal dispersions of carbon nanotubes. , 2003, Journal of colloid and interface science.

[22]  W. P. Ball,et al.  Comparison of quantification methods to measure fire‐derived (black/elemental) carbon in soils and sediments using reference materials from soil, water, sediment and the atmosphere , 2007 .

[23]  T. Bucheli,et al.  Polycyclic aromatic hydrocarbons, black carbon, and molecular markers in soils of Switzerland. , 2004, Chemosphere.

[24]  G. Cornelissen,et al.  Distinct oxidative stabilities of char versus soot black carbon: Implications for quantification and environmental recalcitrance , 2006 .

[25]  E. Waclawik,et al.  Thermal decomposition and electron microscopy studies of single-walled carbon nanotubes , 2007 .

[26]  L. Murr,et al.  Chemistry and nanoparticulate compositions of a 10,000 year-old ice core melt water. , 2004, Water research.

[27]  J. Rouzaud,et al.  Evaluation of a protocol for the quantification of black carbon in sediments , 2001 .

[28]  L. Murr,et al.  Carbon Nanotubes, Nanocrystal Forms, and Complex Nanoparticle Aggregates in common fuel-gas combustion sources and the ambient air , 2004 .

[29]  M. Jackson,et al.  Chemically functionalized carbon nanotubes and their characterization using thermogravimetric analysis, fourier transform infrared, and raman spectroscopy , 2006 .

[30]  P. Gschwend,et al.  Quantification of the dilute sedimentary soot phase : Implications for PAH speciation and bioavailability , 1997 .

[31]  Rui Qiao,et al.  In vivo biomodification of lipid-coated carbon nanotubes by Daphnia magna. , 2007, Environmental science & technology.