FIRST APPROACH TO UAV-BASED CONTACT INSPECTION: A SMART PAYLOAD FOR NAVIGATION IN THE NEIGHBOURHOOD OF STRUCTURES

Abstract. Many inspection tasks of structures are already carried out by unmanned aerial vehicles (UAV). Most of these inspections consist of using payloads for close range remote sensing purposes (i.e. digital cameras, thermal or LiDAR sensors). In all these inspection tasks the UAV system does not need to be close to the structure and typically the GPS coverage is good to perform mission navigation. In this paper, a smart payload developed for navigation in the neighbourhood of structures is presented. With this payload the UAV system is able to control the distance to a structure and the angle formed by the UAV and the structure in the horizontal plane. This payload has been calibrated in order to determine the calibration curve and measure the accuracy of the payload. The system has been tested in an indoor environment (GPS-denied). Good position and angular results has been obtained.

[1]  Yi-Qing Ni,et al.  Technology developments in structural health monitoring of large-scale bridges , 2005 .

[2]  Jan Drewes Achenbach,et al.  Structural health monitoring – What is the prescription? , 2009 .

[3]  C. Ratcliffe.  A Frequency and Curvature Based Experimental Method for Locating Damage in Structures , 2000 .

[4]  R. Shankar Nair,et al.  Preventing disproportionate collapse , 2006 .

[5]  Ivan Bartoli,et al.  Use of Unmanned Aerial Vehicle for Quantitative Infrastructure Evaluation , 2015 .

[6]  L. Bertling,et al.  Maintenance Management of Wind Power Systems Using Condition Monitoring Systems—Life Cycle Cost Analysis for Two Case Studies , 2007, IEEE Transactions on Energy Conversion.

[7]  Joseph L. Rose,et al.  A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential , 2002 .

[8]  Burcin Becerik-Gerber,et al.  Imaged-based verification of as-built documentation of operational buildings , 2012 .

[9]  Joaquin Martinez-Sanchez,et al.  Autonomous Point Cloud Acquisition of Unknown Indoor Scenes , 2018, ISPRS Int. J. Geo Inf..

[10]  Roland Siegwart,et al.  Visual industrial inspection using aerial robots , 2014, Proceedings of the 2014 3rd International Conference on Applied Robotics for the Power Industry.

[11]  Nabil Aouf,et al.  Visual servoing of a Quadrotor UAV for autonomous power lines inspection , 2014, 22nd Mediterranean Conference on Control and Automation.

[12]  F. C. Hadipriono,et al.  ANALYSIS OF RECENT BRIDGE FAILURES IN THE UNITED STATES , 2003 .

[13]  Christopher Parrish,et al.  Cost-Effective Bridge Safety Inspections Using Unmanned Aircraft Systems (UAS) , 2016 .

[14]  Xavier Pons,et al.  Monitoring opencast mine restorations using Unmanned Aerial System (UAS) imagery. , 2019, The Science of the total environment.

[15]  Abdul Kareem Almarshad,et al.  A knowledge-based BIM system for building maintenance , 2013 .

[16]  Kevin L. Rens,et al.  Review of nondestructive evaluation techniques of civil infrastructure , 1999 .

[17]  Roberto Teti,et al.  A roadmap for automated power line inspection. Maintenance and repair. , 2013 .

[18]  Andrew Kusiak,et al.  The prediction and diagnosis of wind turbine faults , 2011 .

[19]  George Stavrakakis,et al.  Geophysical methods contributing to the testing of concrete dams. Application at the Marathon Dam , 2002 .

[20]  Ivan Bartoli,et al.  Bridge related damage quantification using unmanned aerial vehicle imagery , 2016 .

[21]  Ignacio Zabalza Bribián,et al.  Life cycle assessment in buildings: State-of-the-art and simplified LCA methodology as a complement for building certification , 2009 .