Predicting loss of bifurcation behaviour of 0/90 unsymmetric composite plates subjected to environmental loads

Abstract This paper presents an efficient Rayleigh–Ritz numerical model to predict the deformed shape and the multistable behaviour of free-standing square and rectangular 0/90 unsymmetric composite plates subjected to thermal and environmental loads. The out-of-plane displacement functions are generated through proper development of the analytical solution presented by Ashwell [34] for the nonlinear pure bending of isotropic plates; the in-plane displacement functions are formulated following a procedure similar to that employed by Galletly and Guest [32] , starting from geometrical considerations about the actual deformations of the distorted structure. The resulting model is characterised by high-order displacement functions and by few unknown terms, it is appropriate to achieve sufficient accuracy, with high efficiency. The performance of the proposed approach is compared to that of some alternative models available in the literature, to FE simulations and to experimental results.

[1]  W. Jun,et al.  Cured Shape of Unsymmetric Laminates with Arbitrary Lay-Up Angles , 1992 .

[2]  Y. Pao.  Simple Bending Analysis of Laminated Plates by Large-Deflection Theory , 1970 .

[3]  M. Hyer,et al.  Suppression of anticlastic curvature in isotropic and composite plates , 1984 .

[4]  Paul M. Weaver,et al.  Multistable composite plates with piecewise variation of lay-up in the planform , 2009 .

[5]  Michael R Wisnom,et al.  Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates , 2003 .

[6]  Keith A. Seffen,et al.  ‘Morphing’ bistable orthotropic elliptical shallow shells , 2007, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[7]  Michael W. Hyer,et al.  Advanced calculation of the room-temperature shapes of thin unsymmetric composite laminates , 1995 .

[8]  M. W. Hyer,et al.  Non-linear temperature-curvature relationships for unsymmetric graphite-epoxy laminates , 1987 .

[9]  Simon D. Guest,et al.  Bistable composite slit tubes. I. A beam model , 2004 .

[10]  Paul M. Weaver,et al.  Bistable plates for morphing structures: A refined analytical approach with high-order polynomials , 2010 .

[11]  Michael W. Hyer,et al.  Some Observations on the Cured Shape of Thin Unsymmetric Laminates , 1981 .

[12]  Michael W. Hyer,et al.  The Room-Temperature Shapes of Four-Layer Unsymmetric Cross-Ply Laminates , 1982 .

[13]  Jérôme Molimard,et al.  On the nonlinear deformations of thin unsymmetric 0/90 composite plates under hygrothermal loads , 2006 .

[14]  Philippe Olivier,et al.  Thermoviscoelastic analysis of residual curing stresses and the influence of autoclave pressure on these stresses in carbon/epoxy laminates , 2002 .

[15]  Michael W. Hyer,et al.  Calculations of the Room-Temperature Shapes of Unsymmetric Laminatestwo , 1981 .

[16]  D. G. Ashwell,et al.  The Anticlastic Curvature of Rectangular Beams and Plates , 1950, The Journal of the Royal Aeronautical Society.

[17]  K. S. Kim,et al.  Residual stress development during processing of graphite/epoxy composites , 1989 .

[18]  Michael W. Hyer,et al.  Snap-Through of Unsymmetric Cross-Ply Laminates Using Piezoceramic Actuators , 2003 .

[19]  Sung-Hoon Ahn,et al.  Effects of Processing Temperature and Layup on Springback , 1995 .

[20]  Michael W. Hyer,et al.  Analysis of the manufactured shape of rectangular THUNDER-type actuators , 2004 .

[21]  Scott R. White,et al.  Process Modeling of Composite Materials: Residual Stress Development during Cure. Part II. Experimental Validation , 1992 .

[22]  Paul M. Weaver,et al.  Concepts for morphing airfoil sections using bi-stable laminated composite structures , 2008 .

[23]  Stefano Vidoli,et al.  Multiparameter actuation for shape control of bistable composite plates , 2010 .

[24]  Scott R. White,et al.  Process Modeling of Composite Materials: Residual Stress Development during Cure. Part I. Model Formulation , 1992 .

[25]  Michael W. Hyer,et al.  SMA-induced snap-through of unsymmetric fiber-reinforced composite laminates , 2003 .

[26]  Michael W. Hyer,et al.  Thermally-induced deformation behavior of unsymmetric laminates , 1998 .

[27]  Jérôme Molimard,et al.  Transient and cyclical hygrothermoelastic stress in laminated composite plates: Modelling and experimental assessment , 2007 .

[28]  Michael R Wisnom,et al.  Loss of bifurcation and multiple shapes of thin [0/90] unsymmetric composite plates subject to thermal stress , 2004 .

[29]  Peter W. R. Beaumont,et al.  The measurement and prediction of residual stresses in carbon-fibre/polymer composites , 1997 .

[30]  Sergio Pellegrino,et al.  Bistable prestressed shell structures , 2004 .

[31]  Paul M. Weaver,et al.  The application of residual stress tailoring of snap-through composites for variable sweep wings , 2006 .

[32]  Lothar Kroll,et al.  Design of multistable composites for application in adaptive structures , 2002 .

[33]  Stefano Vidoli,et al.  Tristability of thin orthotropic shells with uniform initial curvature , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[34]  Michael W. Hyer,et al.  A Comparison of the Deformations of Various Piezoceramic Actuators , 2006 .

[35]  Laurent Warnet,et al.  Thermally-Induced Shapes of Unsymmetric Laminates , 1996 .

[36]  Sergio Pellegrino,et al.  Analytical models for bistable cylindrical shells , 2006, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.