Transmission error in spur gears: Static and dynamic finite-element modeling and design optimization

[1]  L. D. Mitchell,et al.  A Basic Approach to Gearbox Noise Prediction , 1982 .

[2]  Y Miura,et al.  GEAR RATTLING NOISE ANALYSIS FOR A DIESEL ENGINE , 1998 .

[3]  Clifford Matthews.  Engineers' Data Book , 1998 .

[4]  Donald R. Houser,et al.  Non-linear dynamic analysis of geared systems , 1990 .

[5]  S. L. Harris,et al.  Torsional motions of a pair of spur gears , 1963 .

[6]  Kiyohiko Umezawa,et al.  Effects of Contact Ratio and Profile Correction on Gear Rotational Vibration , 1983 .

[7]  Teik C. Lim,et al.  Methods for Researching Gear Whine in Automotive Transaxles , 1999 .

[8]  G. Chabert,et al.  An Evaluation of Stresses and Deflection of Spur Gear Teeth Under Strain , 1974 .

[9]  Chih-Hung Chung,et al.  Gear Noise Reduction through Transmission Error Control and Gear Blank Dynamic Tuning , 1999 .

[10]  James D. Smith,et al.  Gears and Their Vibration, A Basic Approach to Understanding Gear Noise , 1983 .

[11]  R. G. Munro,et al.  Dynamic Behaviour of Spur Gears , 1963 .

[12]  Donald R. Houser,et al.  Mathematical models used in gear dynamics—A review , 1988 .

[13]  Donald R. Houser,et al.  Dynamic analysis of geared rotors by finite elements , 1992 .

[14]  R. G. Munro1,et al.  An experimental method to measure gear tooth stiffness throughout and beyond the path of contact , 2001 .

[15]  Cyril M. Harris,et al.  Handbook of Acoustical Measurements and Noise Control , 1979 .

[16]  Donald R. Houser,et al.  Optimum Profile Modifications for the Minimization of Static Transmission Errors of Spur Gears , 1986 .

[17]  Takuzo Iwatsubo,et al.  Coupled Lateral-torsional Vibration of Rotor System Trained by Gears : part 1. Analysis by Transfer Matrix Method , 1984 .

[18]  Ahmet Kahraman,et al.  Effect of Involute Contact Ratio on Spur Gear Dynamics , 1999 .

[19]  Teik C. Lim,et al.  Case History: Engine Timing Gear Noise Reduction , 1999 .

[20]  S. L. Harris,et al.  Dynamic Loads on the Teeth of Spur Gears , 1958 .

[21]  Rajendra Singh,et al.  Non-linear dynamics of a spur gear pair , 1990 .

[22]  Barry F. Smith,et al.  Domain Decomposition: Parallel Multilevel Methods for Elliptic Partial Differential Equations , 1996 .

[23]  E. J. Hearn,et al.  A new look at the bending strength of gear teeth , 1980 .

[24]  Thomas E. Pinelli,et al.  National Aeronautics and Space Administration Scientific and Technical Information Programs. , 1990 .

[25]  Everett Kuo,et al.  Estimation of Statistical Distribution of Composite Manufactured Transmission Error, A Precursor to Gear Whine, for A Helical Planetary Gear System , 2001 .

[26]  Hsiang Hsi Lin,et al.  A Parametric Study of Spur Gear Dynamics , 1998 .

[27]  Kiyohiko Umezawa,et al.  Rotational Vibration of a Helical Gear Pair Having Tooth Surface Deviation during Transmission of Light Load , 1996 .

[28]  Shan Shih,et al.  Drivetrain Noise and Vibration Troubleshooting , 2001 .

[29]  Ahmet Kahraman,et al.  Effect of Involute Tip Relief on Dynamic Response of Spur Gear Pairs , 1999 .

[30]  Thomas E. Reinhart,et al.  The influence of diesel engine architecture on noise levels , 1999 .

[31]  Kiyohiko Umezawa,et al.  VIBRATION OF POWER TRANSMISSION HELICAL GEARS (APPROXIMATE EQUATION OF TOOTH STIFFNESS) , 1986 .

[32]  S. L. Harris,et al.  A method of measuring transmission error in spur gears of 1:1 ratio , 1963 .

[33]  P. Velex,et al.  On the modelling of excitations in geared systems by transmission errors , 2006 .

[34]  Donald R. Houser,et al.  Comparison of Transmission Error Predictions with Noise Measurements for Several Spur and Helical Gears , 1994 .

[35]  SYDNEY GREGORY,et al.  Mechanical Design , 1973, Nature.

[36]  Bernard Challen,et al.  Diesel engine reference book , 1999 .

[37]  A P Peyraud,et al.  The d.a. , 1971, CAL [magazine] Certified Akers Laboratories.

[38]  Joseph Edward Shigley,et al.  Mechanical engineering design , 1972 .

[39]  Xianghe Peng,et al.  Survey of nonlinear vibration of gear transmission systems , 2003 .

[40]  J. D. Smith,et al.  Gear Noise and Vibration , 1999 .

[41]  Christoph Steffens,et al.  Simulation Method for Geartrain NVH Assessment and Optimization , 2001 .

[42]  Marco Beghini,et al.  A method to define profile modification of spur gear and minimize the transmission error , 2004 .

[43]  H. Nevzat Özgüven,et al.  Nonlinear Dynamic Modeling of Gear-Shaft-Disk-Bearing Systems Using Finite Elements and Describing Functions , 2004 .

[44]  H. K. Kohler,et al.  Paper 14: Dynamics and Noise of Parallel-Axis Gearing: , 1969 .

[45]  D. C. H. Yang,et al.  A Rotary Model for Spur Gear Dynamics , 1985 .

[46]  W. D. Mark.  Analysis of the vibratory excitation of gear systems: Basic theory , 1978 .

[47]  Jeffrey C. Huang,et al.  Cummins 4B Noise Reduction Anti-Backlash Camshaft Gear , 1999 .

[48]  D B Welbourn,et al.  FUNDAMENTAL KNOWLEDGE OF GEAR NOISE: A SURVEY , 1979 .

[49]  Alec Stokes.  Gear handbook: Design and calculations , 1992 .

[50]  J. J. Moré,et al.  Newton's Method , 1982 .

[51]  Ian Howard,et al.  Error Analysis on Finite Element Modeling of Involute Spur Gears , 2006 .

[52]  W. Marsden.  I and J , 2012 .

[53]  Lars Vedmar,et al.  A General Approach for Determining Dynamic Forces in Spur Gears , 1998 .

[54]  O. I. Kosarev,et al.  Control of Gear Vibrations at Their Source , 2003 .

[55]  V. Simon.  Optimal Tooth Modifications for Spur and Helical Gears , 1989 .

[56]  S. Shishoo,et al.  A GENETIC ALGORITHM APPROACH TO MINIMIZE TRANSMISSION ERROR OF AUTOMOTIVE SPUR GEAR SETS , 2005, Appl. Artif. Intell..

[57]  Magnus MackAldener.  Tooth Interior Fatigue FractureaRobustness of Gears , 2001 .

[58]  Stephanos Theodossiades,et al.  Dynamic analysis of piecewise linear oscillators with time periodic coefficients , 2000 .

[59]  T. K. Garrett,et al.  The Motor Vehicle , 1989 .

[60]  Shigeru Suzuki,et al.  Analysis and Reduction of Engine Front Noise Induced by the Vibration of the Crankshaft System , 1993 .

[61]  Donald R. Houser,et al.  Analysis of off-line of action contact at the tips of gear teeth , 1994 .

[62]  R. V. Dukkipati,et al.  On the Dynamic Gear Tooth Loading of Planetary Gearing as Affected by Bearing Clearances in High-Speed Machinery , 1985 .

[63]  John Andrews.  A finite element analysis of bending stresses induced in external and internal involute spur gears , 1991 .

[64]  D. W. Dudley,et al.  Dudley's Gear Handbook , 1991 .

[65]  Angelo Oreste Andrisano,et al.  Dynamic Optimization of Spur Gears , 2011 .

[66]  Alex Vallance,et al.  Design of machine members , 1943 .

[67]  Darle W. Dudley,et al.  Handbook of Practical Gear Design , 1984 .

[68]  Ahmet Kahraman,et al.  A Transient Mixed Elastohydrodynamic Lubrication Model for Spur Gear Pairs , 2010 .

[69]  W. A. Tuplin.  Gear-Tooth Stresses at High Speed , 1950 .

[70]  Andrew Ball,et al.  A STUDY OF THE NOISE FROM DIESEL ENGINES USING THE INDEPENDENT COMPONENT ANALYSIS , 2001 .