Application of fuzzy-assisted grey Taguchi approach for engine parameters optimization on performance-emission of a CI engine

ABSTRACTWith the prevalent interest in diesel engine performance and emission, it is necessary to define optimum engine operating condition with less number of experiments for the efficient and eff...

[1]  Y. S. Tarng,et al.  Design optimization of cutting parameters for turning operations based on the Taguchi method , 1998 .

[2]  Arindam Majumder,et al.  A Taguchi-fuzzy based multi-objective optimization study on the soot-NOx-BTHE characteristics of an existing CI engine under dual fuel operation with hydrogen , 2014 .

[3]  M. Tazerout,et al.  Experimental investigation on the combustion, performance and pollutant emissions of biodiesel from animal fat residues on a direct injection diesel engine , 2014 .

[4]  Wen Tong Chong,et al.  Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine , 2014 .

[5]  Erkan Öztürk,et al.  Performance, emissions, combustion and injection characteristics of a diesel engine fuelled with canola oil–hazelnut soapstock biodiesel mixture , 2015 .

[6]  Bala Murugan Gopalsamy,et al.  Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA , 2009 .

[7]  Surjya K. Pal,et al.  Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method , 2009 .

[8]  Obed M. Ali,et al.  Analysis of blended fuel properties and engine performance with palm biodiesel–diesel blended fuel , 2016 .

[9]  M. A. Wakil,et al.  Biodiesel production, characterization, engine performance, and emission characteristics of Malaysian Alexandrian laurel oil , 2014 .

[10]  S. Saravanan,et al.  Multi response optimization of NOx emission of a stationary diesel engine , 2010 .

[11]  Kahraman Bozbas,et al.  Biodiesel as an alternative motor fuel: Production and policies in the European Union , 2008 .

[12]  Wenming Yang,et al.  Combustion and emissions characteristics of diesel engine fueled by biodiesel at partial load conditions , 2012 .

[13]  A. Haq,et al.  Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method , 2008 .

[14]  Elizabeth Funmilayo Aransiola,et al.  A review of current technology for biodiesel production: State of the art , 2014 .

[15]  Ch. Ratnam,et al.  Selection of optimal performance parameters of DI diesel engine using Taguchi approach , 2019 .

[16]  Adnan Parlak,et al.  Performance characteristics of a low heat rejection diesel engine operating with biodiesel , 2008 .

[17]  M. Feroskhan,et al.  Evaluating the effect of intake parameters on the performance of a biogas–diesel dual-fuel engine using the Taguchi method , 2020 .

[18]  Cenk Sayin,et al.  Optimization of the operating parameters based on Taguchi method in an SI engine used pure gasoline, ethanol and methanol , 2016 .

[19]  C. Ilkiliç,et al.  The Reduction of Exhaust Emissions from a Diesel Engine by Using Biodiesel Blend , 2010 .

[20]  V. K. Shahir,et al.  Comparative study of diesel and biodiesel on CI engine with emphasis to emissions—A review , 2015 .

[21]  Muammer Nalbant,et al.  Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning , 2007 .

[22]  H. E. Saleh.  Effect of exhaust gas recirculation on diesel engine nitrogen oxide reduction operating with jojoba methyl ester. , 2009 .

[23]  Zone-Ching Lin,et al.  Analysis and Application of Grey Relation and ANOVA in Chemical–Mechanical Polishing Process Parameters , 2003 .

[24]  N Tosun,et al.  Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysis , 2006 .

[25]  Ákos Bereczky,et al.  Engine performance, exhaust emissions and combustion characteristics of a CI engine fuelled with croton megalocarpus methyl ester with antioxidant , 2011 .

[26]  Rupesh Kumar Pandey,et al.  Optimization of bone drilling parameters using grey-based fuzzy algorithm , 2014 .

[27]  C. L. Lin,et al.  The use of grey-fuzzy logic for the optimization of the manufacturing process , 2005 .

[28]  Kadir Aydin,et al.  Diesel engine emissions and performance from blends of citrus sinensis biodiesel and diesel fuel , 2014 .

[29]  Chin-Yu Huang,et al.  Comparison of weighted grey relational analysis for software effort estimation , 2011, Software Quality Journal.

[30]  Ajoy Kumar Das,et al.  Application of Grey–Taguchi based multi-objective optimization strategy to calibrate the PM–NHC–BSFC trade-off characteristics of a CRDI assisted CNG dual-fuel engine , 2014 .

[31]  Swarup Kumar Nayak,et al.  Experimental Investigation on Performance and Emission Characteristics of a Diesel Engine Fuelled with Mahua Biodiesel Using Additive , 2014 .

[32]  K. Palanikumar,et al.  Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling , 2008 .

[33]  Hao Chen,et al.  Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil , 2009 .

[34]  Stefan Majer,et al.  Implications of biodiesel production and utilisation on global climate – A literature review , 2009 .

[35]  K. Murugesan,et al.  Performance optimization of Jatropha biodiesel engine model using Taguchi approach , 2009 .

[36]  Ajoy Kumar Das,et al.  Grey-Fuzzy Taguchi approach for multi-objective optimization of performance and emission parameters of a single cylinder crdi engine coupled with EGR , 2016 .

[37]  Mohd Muqeem,et al.  Taguchi-based combined grey relational and principal component analyses for multi-response optimization of diesel engines , 2017, Grey Syst. Theory Appl..

[38]  M. P. Dorado,et al.  The Ideal Vegetable Oil-based Biodiesel Composition: A Review of Social, Economical and Technical Implications , 2009 .

[39]  Suhas S. Joshi,et al.  Multi-objective optimization of surface roughness and cutting forces in high-speed turning of Inconel 718 using Taguchi grey relational analysis (TGRA) , 2011 .

[40]  Yan-Cherng Lin,et al.  Optimization of machining parameters using magnetic-force-assisted EDM based on gray relational analysis , 2009 .

[41]  H. M. Mobarak,et al.  Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine , 2014 .

[42]  Hwai Chyuan Ong,et al.  Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine , 2014 .

[43]  B. L. Salvi,et al.  Sustainability aspects and optimization of linseed biodiesel blends for compression ignition engine , 2012 .

[44]  Arindam Majumder,et al.  Multi objective optimization of performance parameters of a single cylinder diesel engine running with hydrogen using a Taguchi-fuzzy based approach , 2013 .

[45]  C. L. Lin,et al.  Use of the Taguchi Method and Grey Relational Analysis to Optimize Turning Operations with Multiple Performance Characteristics , 2004 .

[46]  C. L. Lin,et al.  Optimisation of the EDM Process Based on the Orthogonal Array with Fuzzy Logic and Grey Relational Analysis Method , 2002 .

[47]  Saurav Datta,et al.  Grey-based taguchi method for optimization of bead geometry in submerged arc bead-on-plate welding , 2008 .

[48]  Mustafa Canakci,et al.  Evaluation of leather industry wastes as a feedstock for biodiesel production , 2012 .

[49]  Chung-Feng Jeffrey Kuo,et al.  Using the Taguchi method and grey relational analysis to optimize the flat-plate collector process w , 2011 .