The trends in electronic design field are growing day by day towards the low power chip design system. The need of smaller size chips with very small power dissipation increases the demand of low power designs. The supply voltage must be reduced to lower the overall power consumption of the system. In this paper ,we are presented a low power single output two stage CMOS operational amplifier (Op-Amp) with current buffer compensation technique operates in weak inversion region with a 1.8 V supply voltage. The two stage CMOS Op-Amp is designed in UMC 0.18μm CMOS technology. Since MOS transistor in sub-threshold region allows to work at low input bias current and low voltage, so the presented Op-Amp has very low power consumption with a high driving capabilities. The proposed Op-Amp has open loop gain =73.57db, the gain bandwidth product (GBW) 1.094 and 4.35μW power consumption.
[1]
Amana Yadav,et al.
A REVIEW PAPER ON DESIGN AND SYNTHESIS OF TWO - STAGE CMOS OP-AMP
,
2012
.
[2]
Ming-Dou Ker,et al.
Impact of MOSFET Gate-Oxide Reliability on CMOS Operational Amplifier in a 130-nm Low-Voltage Process
,
2008,
IEEE Transactions on Device and Materials Reliability.
[3]
Ehsan Kargaran,et al.
A 1.5 v High Swing Ultra-Low-Power Two Stage CMOS OP-AMP in 0.18 µm Technology
,
2010,
2010 2nd International Conference on Mechanical and Electronics Engineering.
[4]
F. Razaghian,et al.
LOW POWER OP-AMP BASED ON WEAK INVERSION WITH MILLER-CASCODED FREQUENCY COMPENSATION
,
2010
.