Investigation of the controlled atmosphere of semisolid metal processing of A356 aluminium alloy

The cooling slope (CS) method is one of the semi-solid methods in which the molten alloy with a suitable amount of superheat is poured on a cooling slope to achieve a fine and non-dendritic structure. After pouring, the melt, which becomes semisolid at the end of the plate, is subsequently poured into a cylindrical steel mold with different mold temperatures. Also, the process has been done in different cooling slopes and different cooling lengths. This work, at first discusses the effect of these parameters on the final microstructure of A356 aluminum alloy and then the effect of the controlled atmosphere is discussed. Also, in this research, the advantages of using the controlled atmosphere system are discussed by tests such as XRD, SEM and ultrasonic test. Results indicate that the pouring temperature, mold temperature, cooling slope and cooling length have significant effects on the size and morphology of α-Al phase. Also, the controlled atmosphere could optimize the process as well and increase the mechanical properties of alloy.

[1]  A. Ghassemi,et al.  Study on the effects of the length and angle of inclined plate on the thixotropic microstructure of A356 aluminum alloy , 2009 .

[2]  Xuping Wu,et al.  The formation of rosette α phase, structural evolution during the reheating and semi-solid casting of AlSi7Mg alloy , 2003 .

[3]  S. J. Hosseinipour,et al.  Effect of Temperature on the Microstructure of Semi-Solid Casting in Cooling Slope Method , 2013 .

[4]  D. StJohn,et al.  The shear behaviour of partially solidified Al-Si-Cu alloys , 2000 .

[5]  Myung-Ho Kim,et al.  Extrusion behavior of Al-Cu alloys in the semisolid state , 2005 .

[6]  C. Kang,et al.  Vacuum-assisted rheo-forging process of A356 aluminum alloys , 2008 .

[7]  Z. Fan,et al.  Semisolid metal processing , 2002 .

[8]  A. Ludwig,et al.  Simulation of cooling channel rheocasting process of A356 aluminum alloy using three-phase volume averaging model , 2005 .

[9]  A. Mullis.  Growth induced dendritic bending and rosette formation during solidification in a shearing flow , 1999 .

[10]  Amin Kolahdooz,et al.  Optimization of semi-solid metal processing of A356 aluminum alloy , 2013 .

[11]  H. Watari,et al.  Effects of casting factors of cooling slope on semisolid condition , 2010 .

[12]  K. Sukumaran,et al.  The effect of isothermal mechanical stirring on an Al–Si alloy in the semisolid condition , 2004 .

[13]  Y. Birol.  A357 thixoforming feedstock produced by cooling slope casting , 2007 .

[14]  S. M. Ghavamodini,et al.  Microstructure Evolution of A356 Aluminum Alloy Produced by Cooling Slope Method , 2011 .

[15]  Merton C. Flemings,et al.  Behavior of metal alloys in the semisolid state , 1991 .

[16]  Ye Chen,et al.  Relationship between Ultrasonic Characteristics and Relative Porosity in Al and Al-XSi Alloys , 2009 .

[17]  H. Saghafian,et al.  Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy , 2009 .

[18]  P. Dutta,et al.  Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope , 2010 .