Finite difference thermal model of a latent heat storage system coupled with a photovoltaic device: Description and experimental validation

The use of photovoltaic (PV) systems has been showing a significant growth trend but for a more effective development of this technology it is essential to have higher energy conversion performances. Producers of PV often declare an higher efficiency respect to real conditions and this deviation is mainly due to the difference between nominal and real temperature conditions of the PV. To improve the solar cell energy conversion efficiency many authors have proposed a methodology to keep lower the temperature of a PV system: a modified PV system built with a normal PV panel coupled with a Phase Change Material (PCM) heat storage device. In this paper is described a thermal model analysis of the PV–PCM system based on a theoretical study using finite difference approach. The authors developed an algorithm based on an explicit finite difference formulation of energy balance of the PV–PCM system. To this aim, a forward difference at time t and a first-order central difference for the space derivative at position x was used. Two sets of recursive equations were developed for two types of spatial domains: a boundary domain and an internal domain .The reliability of the developed model is tested by a comparison with data coming from a test facility. Results of this experience confirm the performed numerical simulations and show that the proposed model is valid and can be used to determine the thermal behaviour of a solar cell coupled with a PCM heat storage device.

[1]  M. Cross,et al.  Accurate solutions of moving boundary problems using the enthalpy method , 1981 .

[2]  H. Weinlaeder,et al.  Monitoring results of an interior sun protection system with integrated latent heat storage , 2011 .

[3]  José Antonio Almendros-Ibáñez,et al.  A numerical study of external building walls containing phase change materials (PCM). , 2012 .

[4]  Pushpito Kumar Ghosh,et al.  Self regulation of photovoltaic module temperature in V-trough using a metal–wax composite phase change matrix , 2011 .

[5]  Giuseppina Ciulla,et al.  On the Efficacy of PCM to Shave Peak Temperature of Crystalline Photovoltaic Panels: An FDM Model and Field Validation , 2013 .

[6]  Philip C. Eames,et al.  Thermal regulation of building-integrated photovoltaics using phase change materials , 2004 .

[7]  Philip C. Eames,et al.  Comparison of a Small Scale 3-d PCM Thermal Control Model with a Validated 2-d PCM Thermal Control Model , 2006 .

[8]  B. Zivkovic,et al.  An analysis of isothermal phase change of phase change material within rectangular and cylindrical containers , 2001 .

[9]  Randy D. Weinstein,et al.  A direct comparison of three different material enhancement methods on the transient thermal response of paraffin phase change material exposed to high heat fluxes , 2011 .

[10]  António Lopes,et al.  Urban boundary layer wind speed reduction in summer due to urban growth and environmental consequences in Lisbon , 2011, Environ. Model. Softw..

[11]  Hazim B. Awbi,et al.  Performance of phase change material boards under natural convection , 2009 .

[12]  Brian Norton,et al.  Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics , 2010 .

[13]  Dan Zhou,et al.  Review on thermal energy storage with phase change materials (PCMs) in building applications , 2012 .

[14]  Wasim Saman,et al.  Numerical analysis of a PCM thermal storage system with varying wall temperature , 2005 .

[15]  J. Crank,et al.  A practical method for numerical evaluation of solutions of partial differential equations of the heat-conduction type , 1947 .

[16]  Brian Norton,et al.  Phase change materials for limiting temperature rise in building integrated photovoltaics , 2006 .

[17]  Giuseppina Ciulla,et al.  THE REDESIGN OF AN ITALIAN BUILDING TO REACH NET ZERO ENERGY PERFORMANCES: A CASE STUDY OF THE SHC TASK 40 ECBCS Annex 52 , 2011 .

[18]  Antonio Piacentino,et al.  A measurement methodology for monitoring a CHCP pilot plant for an office building , 2003 .

[19]  V. Voller.  FAST IMPLICIT FINITE-DIFFERENCE METHOD FOR THE ANALYSIS OF PHASE CHANGE PROBLEMS , 1990 .

[20]  Valerio Lo Brano,et al.  On the experimental validation of an improved five-parameter model for silicon photovoltaic modules , 2012 .

[21]  Giuseppina Ciulla,et al.  582. A Photovoltaic panel coupled with a phase changing material heat storage system in hot climates , 2008 .

[22]  Valerio Lo Brano,et al.  Quality of wind speed fitting distributions for the urban area of Palermo, Italy , 2011 .

[23]  W. Swinbank.  Long‐wave radiation from clear skies , 1963 .

[24]  Jungki Seo,et al.  High thermal performance composite PCMs loading xGnP for application to building using radiant floor heating system , 2012 .

[25]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[26]  Rizwan Ahmed Memon,et al.  Effects of building aspect ratio and wind speed on air temperatures in urban-like street canyons , 2010 .

[27]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .