A practical methodology for computer-aided design of custom 3D printable casts for wrist fractures

In recent years, breakthroughs in the fields of reverse engineering and additive manufacturing techniques have led to the development of innovative solutions for personalized medicine. 3D technologies are quickly becoming a new treatment concept that hinges on the ability to shape patient-specific devices. Among the wide spectrum of medical applications, the orthopaedic sector is experiencing the most benefits. Several studies proposed modelling procedures for patient-specific 3D-printed casts for wrist orthoses, for example. Unfortunately, the proposed approaches are not ready to be used directly in clinical practice since the design of these devices requires significant interaction among medical staff, reverse engineering experts, additive manufacturing specialists and CAD designers. This paper proposes a new practical methodology to produce 3D printable casts for wrist immobilization with the aim of overcoming these drawbacks. In particular, the idea is to realize an exhaustive system that can be used within a paediatric environment. It should provide both a fast and accurate dedicated scanning of the hand-wrist-arm district, along with a series of easy-to-use semi-automatic tools for the modelling of the medical device. The system was designed to be used directly by the clinical staff after a brief training. It was tested on a set of five case studies with the aim of proving its general reliability and identifying possible major flaws. Casts obtained using the proposed system were manufactured using a commercial 3D printer, and the device’s compliance with medical requirements was tested. Results showed that the designed casts were correctly generated by the medical staff without the need of involving engineers. Moreover, positive feedback was provided by the users involved in the experiment.

[1]  Y. Zhong.  Key techniques for 3D garment design , 2011 .

[2]  Lin Shi,et al.  A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast , 2016, 3D Printing in Medicine.

[3]  David López-Fernández,et al.  A new approach for multi-view gait recognition on unconstrained paths , 2016, J. Vis. Commun. Image Represent..

[4]  Vincent Lepetit,et al.  A Novel Representation of Parts for Accurate 3D Object Detection and Tracking in Monocular Images , 2015, 2015 IEEE International Conference on Computer Vision (ICCV).

[5]  Hao Guo,et al.  Correspondence estimation for non-rigid point clouds with automatic part discovery , 2016, The Visual Computer.

[6]  Chad Asplund,et al.  Principles of casting and splinting. , 2009, American family physician.

[7]  I. Ashcroft,et al.  Topology Optimization for Additive Manufacturing , 2011 .

[8]  Radu Bogdan Rusu,et al.  3D is here: Point Cloud Library (PCL) , 2011, 2011 IEEE International Conference on Robotics and Automation.

[9]  Hong Qin,et al.  Surface completion for shape and appearance , 2006, The Visual Computer.

[10]  Shigeru Inui,et al.  Virtual draping by mapping , 2018, Comput. Ind..

[11]  Francisco José Madrid-Cuevas,et al.  Automatic generation and detection of highly reliable fiducial markers under occlusion , 2014, Pattern Recognit..

[12]  Monica Carfagni,et al.  Fast and low cost acquisition and reconstruction system for human hand-wrist-arm anatomy , 2017 .

[13]  Sina Babazadeh,et al.  Three‐dimensional printing in orthopaedic surgery: review of current and future applications , 2016, ANZ journal of surgery.

[14]  William J. Schroeder,et al.  Overview of Visualization , 2005, The Visualization Handbook.

[15]  Ajay Joneja,et al.  Draping 2D Patterns Onto 3D Surfaces , 2003 .

[16]  Charlie C. L. Wang,et al.  Thermal-Comfort Design of Personalized Casts , 2017, UIST.

[17]  Thomas K. Peucker,et al.  2. Algorithms for the Reduction of the Number of Points Required to Represent a Digitized Line or its Caricature , 2011 .

[18]  Vishnu Radhakrishnan,et al.  LiDAR-Camera Calibration using 3D-3D Point correspondences , 2017, ArXiv.

[19]  Monica Carfagni,et al.  On the Performance of the Intel SR30 Depth Camera: Metrological and Critical Characterization , 2017, IEEE Sensors Journal.

[20]  William E. Lorensen,et al.  The visualization toolkit (2nd ed.): an object-oriented approach to 3D graphics , 1998 .

[21]  Huhn Kim,et al.  Case study: Hybrid model for the customized wrist orthosis using 3D printing , 2015 .

[22]  Marc Alexa,et al.  Computing and Rendering Point Set Surfaces , 2003, IEEE Trans. Vis. Comput. Graph..

[23]  Adam E M Eltorai,et al.  Three-Dimensional Printing in Orthopedic Surgery. , 2015, Orthopedics.

[24]  Lihui Wang,et al.  Automatic work objects calibration via a global-local camera system , 2014 .

[25]  William Schroeder,et al.  The Visualization Toolkit: An Object-Oriented Approach to 3-D Graphics , 1997 .

[26]  Ludovico Minto,et al.  Operating Principles of Structured Light Depth Cameras , 2016 .

[27]  Lin Shi,et al.  Application of 3D–printed and patient-specific cast for the treatment of distal radius fractures: initial experience , 2017, 3D Printing in Medicine.

[28]  A. Clausen.  Topology Optimization for Additive Manufacturing , 2016 .

[29]  David H. Douglas,et al.  ALGORITHMS FOR THE REDUCTION OF THE NUMBER OF POINTS REQUIRED TO REPRESENT A DIGITIZED LINE OR ITS CARICATURE , 1973 .

[30]  Tomáš Návrat,et al.  Pilot study of the wrist orthosis design process , 2014 .