Review of Dynamic Voltage Restorer Application for Compensation of Voltage Harmonics in Power Systems

Power distribution networks are considered the main link between power industry and consumers and they are exposed to public judgment and evaluation more than any other section. Thus, it is essential to study power quality in distribution section. On the other hand, power distribution networks have always been exposed to traditional factors such as  voltage sag, voltage swell, harmonics and capacitor switching which destruct sinusoidal waveforms and decrease power quality as well as network reliability. One of the methods by which power quality problems might be addressed is to apply power electronic devices in the form of custom power devices. One of such devices is Dynamic Voltage Restorer (DVR) which is connected in series to distribution networks. At the same time, through injection of voltage to the network it is able to control voltage amplitude and phase. It is  adopted lend to compensate for voltage sags through injecting series and synchronous three phase voltage. This paper reviews on the application of DVR for Voltage Compensation in recent years and gives sets of information for each control of the DVR in distribution networks.

[1]  T. Larsson,et al.  STATCOM, an efficient means for flicker mitigation , 1999, IEEE Power Engineering Society. 1999 Winter Meeting (Cat. No.99CH36233).

[2]  C. J. Melhorn,et al.  An evaluation of energy storage techniques for improving ride-through capability for sensitive customers on underground networks , 1996, Proceedings of 1996 IAS Industrial and Commercial Power Systems Technical Conference.

[3]  Hirofumi Akagi,et al.  Instantaneous Reactive Power Compensators Comprising Switching Devices without Energy Storage Components , 1984, IEEE Transactions on Industry Applications.

[4]  P. Sekhar,et al.  Power Quality Enhancement Using Custom Power Devices , 2012 .

[5]  A. Moreno-Munoz,et al.  Study of sag compensation with DVR , 2006, MELECON 2006 - 2006 IEEE Mediterranean Electrotechnical Conference.

[6]  F. Blaabjerg,et al.  Comparison of system topologies for dynamic voltage restorers , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[7]  J. R. Vazquez,et al.  Active Power-line Conditioners , 2007 .

[8]  Laszlo Gyugyi,et al.  Reactive Power Generation and Control by Thyristor Circuits , 1976, IEEE Transactions on Industry Applications.

[9]  Seung-Ki Sul,et al.  Compensation voltage control in dynamic voltage restorers by use of feed forward and state feedback scheme , 2005, IEEE Transactions on Power Electronics.

[10]  E. Acha,et al.  Modeling and Analysis of Custom Power Systems by PSCAD/EMTDC , 2001, IEEE Power Engineering Review.

[11]  Majid Gandomkar,et al.  Optimal placement of D-STATCOM using hybrid genetic and ant colony algorithm to losses reduction , 2013 .

[12]  J.A. Martinez.  Modeling of Custom Power equipment using electromagnetic transients programs , 2000, Ninth International Conference on Harmonics and Quality of Power. Proceedings (Cat. No.00EX441).

[13]  A. Mohamed,et al.  Modeling and analysis of a 24-pulse dynamic voltage restorer in a distribution system , 2002, Student Conference on Research and Development.

[14]  Mahmoud Zadehbagheri,et al.  Modeling and Simulation of Dynamic Voltage Restorer for Voltage Sag/Swell Compensation in Power Distribution Networks : A Review , 2015 .

[15]  Laszlo Gyugyi,et al.  Power electronics in electric utilities: static VAR compensators , 1988, Proc. IEEE.

[16]  Turan Gonen,et al.  Electric power distribution system engineering , 1985 .

[17]  R.N. Mukerjee,et al.  Dynamic Voltage Restorer For Voltage Sag Compensation , 2005, 2005 International Conference on Power Electronics and Drives Systems.

[18]  L. Benchaita,et al.  A comparison of voltage source and current source shunt active filter by simulation and experimentation , 1999 .

[19]  F. Blaabjerg,et al.  A detailed comparison of system topologies for dynamic voltage restorers , 2005, IEEE Transactions on Industry Applications.

[20]  Narain G. Hingorani,et al.  Introducing custom power , 1995 .

[21]  Jianhua Bian,et al.  Using distribution static compensators (D-STATCOMs) to extend the capability of voltage-limited distribution feeders , 1996, Proceedings of Rural Electric Power Conference.

[22]  A. Felce,et al.  Voltage sag analysis and solution for an industrial plant with embedded induction motors , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[23]  B.N. Singh,et al.  A new topology of active filter to correct power-factor, compensate harmonics, reactive power and unbalance of three-phase four-wire loads , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[24]  P. Daehler,et al.  Requirements and solutions for dynamic voltage restorer, a case study , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[25]  John Godsk Nielsen,et al.  Control strategies for dynamic voltage restorer compensating voltage sags with phase jump , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[26]  A. K. Kalafala,et al.  Micro superconducting magnetic energy storage (SMES) system for protection of critical industrial and military loads , 1996 .

[27]  J. Burnett.  Survey of power quality in high-rise air-conditioned buildings , 1994 .

[28]  Math Bollen,et al.  Understanding Power Quality Problems: Voltage Sags and Interruptions , 1999 .

[29]  N. Mithulananthan,et al.  Dynamic Control Strategy in Medium Voltage DVR for Mitigating Voltage Sags/Swells , 2006, 2006 International Conference on Power System Technology.

[30]  Majid Baghaei Nejad,et al.  Review of the UPFC Different Models in Recent Years , 2014 .

[31]  Seyed Hossein Hosseini,et al.  Inter-line dynamic voltage restorer control using a novel optimum energy consumption strategy , 2006, Simul. Model. Pract. Theory.

[32]  Gun-Woo Moon.  Predictive current control of distribution static compensator for reactive power compensation , 1999 .

[33]  Phoivos D. Ziogas,et al.  Analysis and design of a three-phase synchronous solid-state VAr compensator , 1989 .

[34]  S.S. Choi,et al.  Control of energy optimized dynamic voltage restorer , 1999, IECON'99. Conference Proceedings. 25th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.99CH37029).

[35]  J. H. Gurney,et al.  Field demonstration of a distribution static compensator used to mitigate voltage flicker , 1999, IEEE Power Engineering Society. 1999 Winter Meeting (Cat. No.99CH36233).

[36]  D. Boudon,et al.  Custom power interface , 2001 .

[37]  San Shing Choi,et al.  Dynamic voltage restoration with minimum energy injection , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[38]  Mahmoud Zadehbagheri,et al.  The Feasibility Study of Using Space Vector Modulation Inverters in Two-Level of Integrated Photovoltaic System , 2015 .

[39]  Matti Lehtonen,et al.  Voltage sag distributions caused by power system faults , 2003 .

[40]  D. S. Dorr,et al.  Understanding and resolving voltage sag related problems for sensitive industrial customers , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[41]  Harpal Tiwari,et al.  Dynamic Voltage Restorer Based on Load Condition , 2010 .

[42]  Mike Barnes,et al.  Dynamic voltage restorer based on voltage space vector PWM control , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[43]  J.H.R. Enslin,et al.  Converter based solution to power quality problems on radial distribution lines , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[44]  Il-Yop Chung,et al.  The DC link energy control method in dynamic voltage restorer system , 2003 .

[45]  C. S. Chang,et al.  The influence of motor loads on the voltage restoration capability of the dynamic voltage restorer , 2000, PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409).

[46]  M. B. Hughes,et al.  Canadian national power quality survey , 1993 .

[47]  Fred Denny,et al.  Distribution System Modeling and Analysis , 2001 .

[48]  Liu Hao.  PRINCIPLE AND REALIZATION OF A DYNAMIC VOLTAGE REGULATOR (DVR) BASED ON LINE VOLTAGE COMPENSATING , 2003 .

[49]  John Godsk Nielsen,et al.  Design and Control of a Dynamic Voltage Restorer , 2002 .