The influence of epoxy resin on the morphological and rheological properties of PET/PA66 blend

[1]  S. Velankar,et al.  Effect of compatibilizer concentration and weight fraction on model immiscible blends with interfacial crosslinking , 2011 .

[2]  A. Zadhoush,et al.  Investigation of the effect of SSP in stabilizing the structure of condensation polymer blends via rheological measurements , 2011 .

[3]  G. C. Allen,et al.  Structural characterization and thermal properties of polyamide 6.6/Mg, Al/adipate-LDH nanocomposites obtained by solid state polymerization , 2010 .

[4]  P. Moldenaers,et al.  The effect of interfacial properties on the deformation and relaxation behavior of PMMA/PS blends , 2010 .

[5]  J. Maia,et al.  Rheomechanical and morphological study of compatibilized PP/EVOH blends , 2009 .

[6]  Chuyang Y. Tang,et al.  Effect of membrane chemistry and coating layer on physiochemical properties of thin film composite polyamide RO and NF membranes I. FTIR and XPS characterization of polyamide and coating layer chemistry , 2009 .

[7]  N. Demarquette,et al.  Stress relaxation behavior of PMMA/PS polymer blends , 2009 .

[8]  A. V. Machado,et al.  Rheological behavior of compatibilized and non-compatibilized PA6/EPM blends , 2007 .

[9]  M. Bousmina,et al.  Effect of Copolymer Addition on Drop Deformation during Uniaxial Elongation and during Relaxation after Cessation of Flow , 2007 .

[10]  N. Demarquette,et al.  Rheological behavior of poly(methyl methacrylate)/polystyrene (PMMA/PS) blends with the addition of PMMA-ran-PS , 2007 .

[11]  P. Moldenaers,et al.  Rheology and morphology of polystyrene/polypropylene blends with in situ compatibilization , 2007 .

[12]  Y. Antonov,et al.  Interfacial Relaxation in Polymer Blends and Gibbs Elasticity , 2007 .

[13]  Deepak Srivastava,et al.  Effect of carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) concentration on thermal and mechanical properties of binary blends of diglycidyl ether of bisphenol-A (DGEBA) epoxy resin , 2007 .

[14]  J. Leckie,et al.  Hypochlorite degradation of crosslinked polyamide membranes: II. Changes in hydrogen bonding behavior and performance , 2006 .

[15]  C. Macosko,et al.  The effect of block copolymer architecture on the coalescence and interfacial elasticity in compatibilized polymer blends , 2005 .

[16]  C. Macosko,et al.  Reactions at polymer-polymer interfaces for blend compatibilization , 2003 .

[17]  J. Pascault,et al.  Reaction and miscibility of two diepoxides with poly(ethylene terephthalate) , 2003 .

[18]  S. Jana,et al.  A study on the use of phenoxy resins as compatibilizers of polyamide 6 (PA6) and polybutylene terephthalate (PBT) , 2003 .

[19]  Jan Mewis,et al.  Effect of Marangoni stresses on the deformation and coalescence in compatibilized immiscible polymer blends , 2002 .

[20]  Jinghua Yin,et al.  Rheology and Morphology of Reactively Compatibilized PP/PA6 Blends , 2002 .

[21]  S. Jabarin,et al.  End‐group determination in poly(ethylene terephthalate) by infrared spectroscopy , 2002 .

[22]  C. Macosko,et al.  Slip at polymer–polymer interfaces: Rheological measurements on coextruded multilayers , 2002 .

[23]  Rosario E. S. Bretas,et al.  Rheology of polymer blends: non-linear model for viscoelastic emulsions undergoing high deformation flows , 2001 .

[24]  Peter Van Puyvelde,et al.  Rheology and morphology of compatibilized polymer blends , 2001 .

[25]  P. Puyvelde,et al.  Effect of compatibilization on the breakup of polymeric drops in shear flow , 2001 .

[26]  C. Friedrich,et al.  Rheological behavior of PS-melts containing surface modified PMMA-particles , 2001 .

[27]  M. Moan,et al.  Rheological properties and reactive compatibilization of immiscible polymer blends , 2000 .

[28]  J. Winterhalter,et al.  Analysis of Palierne’s emulsion model in the case of viscoelastic interfacial properties , 1999 .

[29]  M. Bousmina.  Rheology of polymer blends: linear model for viscoelastic emulsions , 1999 .

[30]  K. Jayaraman,et al.  Rheology of Reactively Compatibilized Polymer Blends with Varying Extent of Interfacial Reaction , 1999 .

[31]  S. Fellahi,et al.  Toughening of epoxy resin using hydroxyl-terminated polyesters , 1999 .

[32]  Yongqing Huang,et al.  Morphology and properties of PET/PA-6/E-44 blends , 1998 .

[33]  H. Cantow,et al.  Interpretation of a new interface-governed relaxation process in compatibilized polymer blends , 1997 .

[34]  F. Chang,et al.  Reactive compatibilization of PET/LCP blends by a multifunctional epoxy coupler , 1997 .

[35]  F. Chang,et al.  Reactive compatibilization of polymer blends of poly(butylene terephthalate) (PBT) and polyamide-6,6 (PA66) .1. Rheological and thermal properties , 1997 .

[36]  R. Muller,et al.  Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids , 1993 .

[37]  Z. Dong.  Rheological properties and gel properties of agar , 2009 .

[38]  C. Macosko,et al.  Interfacial elasticity and coalescence suppression in compatibilized polymer blends , 2004 .

[39]  F. Chang,et al.  Reactive compatibilization of polyamide‐6 (PA 6)/polybutylene terephthalate (PBT) blends by a multifunctional epoxy resin , 2000 .

[40]  J. Weese,et al.  A nonlinear regularization method for the calculation of relaxation spectra , 1993 .