Modeling Polymer Electrolyte Fuel Cells with Large Density and Velocity Changes

A model fully coupling the flow, species transport, and electrochemical kinetics in polymer electrolyte fuel cells is presented to explore operation undergoing very large density and velocity variations. Comparisons are also made to a previous constant-flow model, which neglects the mass source/sink from the continuity equation and assumes constant gas density. Numerical results reveal large density (>50%) and velocity (>80%) variations occurring in the anode at anode stoichiometry of 1.2. In addition, the hydrogen concentration remained as high as the inlet owing to deceleration of the anode gas flow. Finally, the constant-flow model is accurate within 14% under common operating conditions, i.e., for anode stoichiometry ranging from 1.2 to 2.0.

[1]  Chao-Yang Wang,et al.  Large-scale simulation of polymer electrolyte fuel cells by parallel computing , 2004 .

[2]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[3]  T. Springer,et al.  Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells , 1993 .

[4]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[5]  Chao-Yang Wang,et al.  Transient analysis of polymer electrolyte fuel cells , 2005 .

[6]  T. Fuller,et al.  Influence of rib spacing in proton-exchange membrane electrode assemblies , 1996 .

[7]  T. Fuller,et al.  Water and Thermal Management in Solid‐Polymer‐Electrolyte Fuel Cells , 1993 .

[8]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[9]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[10]  J. Weidner,et al.  Diffusion of water in Nafion 115 membranes , 2000 .

[11]  Chao-Yang Wang,et al.  Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells , 2000 .

[12]  Shimshon Gottesfeld,et al.  The Water Content Dependence of Electro-Osmotic Drag in Proton-Conducting Polymer Electrolytes , 1995 .

[13]  S. Dutta,et al.  Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell , 2001 .

[14]  Sadik Kakac,et al.  Two‐dimensional model for proton exchange membrane fuel cells , 1998 .

[15]  F. Büchi,et al.  Investigation of the Transversal Water Profile in Nafion Membranes in Polymer Electrolyte Fuel Cells , 2001 .

[16]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[17]  A. A. Kulikovsky,et al.  Quasi-3D Modeling of Water Transport in Polymer Electrolyte Fuel Cells , 2003 .

[18]  Chaoyang Wang,et al.  Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells , 2004 .

[19]  S. Dutta,et al.  Three-dimensional numerical simulation of straight channel PEM fuel cells , 2000 .

[20]  Chao-Yang Wang,et al.  Electron Transport in PEFCs , 2004 .