The arc-fault circuit protection
暂无分享,去创建一个
In electrical power systems bolted short-circuits are rare and the fault usually involves arcing and burning; mostly the limit value of minimum short-circuit depends on arcing-fault. In AC low voltage systems, the paper examines the arcing-fault branch circuits as weak points. Different protection measures are available against the arc-faults. A first measure that can guarantee a probabilistic protection is allowed by the adoption of overcurrent protective devices (OCPD), optimizing the design of the structure of the system and/or the coordination of protection. A well known complete protection is allowed by adopting arc-fault circuit interrupters (AFCI) for the protection of branch circuits. The authors suggest a new complete protection allowed wiring of the branch circuits, particularly including extension cords, with special power cables, protected by ordinary ground fault protective devices (GFPD). The suggested design for single-core or multi-core power cables is that each insulated core has a concentric conductor shield. Converting the line-to-line fault into a line to ground fault or into a mixed type is the goal of this special cable type faults ground-forced cable (FGFC).
[1] G. D. Gregory,et al. The arc-fault circuit interrupter, an emerging product , 1998, 1998 IEEE Industrial and Commercial Power Systems Technical Conference. Conference Record. Papers Presented at the 1998 Annual Meeting (Cat. No.98CH36202).
[2] Mark W. Earley,et al. National electrical code handbook , 2002 .
[3] Giuseppe Parise,et al. Arcing fault in sub-distribution branch-circuits , 1993 .