A fiber Bragg grating based sensing platform fabricated by fused deposition modeling process for plantar pressure measurement

Abstract Fused deposition modeling (FDM) is an important technology for 3D printing and can be used for rapidly production of functional parts. This paper presents a fiber Bragg grating (FBG) based sensing platform fabricated using FDM method. This sensing platform include a number of pressure sensing components fabricated by layering of extruded Polylactic Acid (PLA) materials. FBG sensors were fixed at center of each sensing component for pressure measurement. Performance of the sensing system was calibrated by applying step by step load on FBG pressure sensors. After calibration, this sensing platform was used to monitor plantar pressure distribution arise from weight gaining and losing processes of a female subject. It is found that plantar pressure of heel is almost twice the pressure magnitudes of both the first and second metatarsus (fore-foot), while there is limited pressure at the mid-foot position during weight gaining process. Pressures of the two metatarsus areas are around 50% (pressure ratio) of heel position and decrease continuously as the increase of subject weight, but weight losing process has very limited influence on this pressure ratio. Center of gravity of this female subject was also found to shift backward substantially during weighting gaining process. Therefore, protection of the heel position is highly important during both weight gaining and losing processes due to the presence of significant pressure concentration.

[1]  Rezaul K. Begg,et al.  Foot Plantar Pressure Measurement System: A Review , 2012, Sensors.

[2]  Ying Mei,et al.  3D printing facilitated scaffold-free tissue unit fabrication , 2014, Biofabrication.

[3]  Ivan Poupyrev,et al.  Printed optics: 3D printing of embedded optical elements for interactive devices , 2012, UIST.

[4]  B Mahltig,et al.  Possible Applications of 3D Printing Technology on Textile Substrates , 2016 .

[5]  David J Margolis,et al.  Medical conditions as risk factors for pressure ulcers in an outpatient setting. , 2003, Age and ageing.

[6]  Jian-Hua Yin,et al.  Comparative Study on the Elongation Measurement of a Soil Nail Using Optical Lower Coherence Interferometry Method and FBG Method , 2010 .

[7]  Andrea Ehrmann,et al.  Combining 3D printed forms with textile structures - mechanical and geometrical properties of multi-material systems , 2015 .

[8]  S. Marocco,et al.  Classification of plantar pressure and heel acceleration patterns using neural networks , 2005, Proceedings. 2005 IEEE International Joint Conference on Neural Networks, 2005..

[9]  Joseph A. Paradiso,et al.  Shoe-integrated sensor system for wireless gait analysis and real-time feedback , 2002, Proceedings of the Second Joint 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society] [Engineering in Medicine and Biology.

[10]  Ryan B. Wicker,et al.  3D Printing multifunctionality: structures with electronics , 2014 .

[11]  J. Hao,et al.  Combined application of FBG and PZT sensors for plantar pressure monitoring at low and high speed walking. , 2015, Technology and health care : official journal of the European Society for Engineering and Medicine.

[12]  C. P. Purssell,et al.  Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors , 2014 .

[13]  M. Rodgers.  Dynamic biomechanics of the normal foot and ankle during walking and running. , 1988, Physical therapy.

[14]  K. Hill,et al.  Fiber Bragg grating technology fundamentals and overview , 1997 .

[15]  Wojciech Matusik,et al.  Computational Light Routing , 2014, ACM Trans. Graph..

[16]  Plantar pressure variation during jogging with different heel height , 2013 .

[17]  Y.T. Zhang,et al.  Wearable medical devices for tele-home healthcare , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[18]  Qiao Li,et al.  In-Shoe Plantar Pressure Measurement and Analysis System Based on Fabric Pressure Sensing Array , 2010, IEEE Transactions on Information Technology in Biomedicine.

[19]  Ming-Yih Lee,et al.  Development of a flexible PDMS capacitive pressure sensor for plantar pressure measurement , 2012 .

[20]  Ralph P. Tatam,et al.  Development and application of optical fibre strain and pressure sensors for in-flight measurements , 2016 .

[21]  R Suresh,et al.  Development of a high resolution plantar pressure monitoring pad based on fiber Bragg grating (FBG) sensors. , 2015, Technology and health care : official journal of the European Society for Engineering and Medicine.

[22]  Yifan Zhang,et al.  Application of FBG sensors for geotechnical health monitoring, a review of sensor design, implementation methods and packaging techniques , 2016 .

[23]  P. Bonato,et al.  Wearable sensors/systems and their impact on biomedical engineering , 2003, IEEE Engineering in Medicine and Biology Magazine.

[24]  H. N. Vikranth,et al.  Design and development of Fiber Bragg Grating sensing plate for plantar strain measurement and postural stability analysis , 2014 .

[25]  Samuel B. Kesner,et al.  Design Principles for Rapid Prototyping Forces Sensors Using 3-D Printing , 2011, IEEE/ASME Transactions on Mechatronics.

[26]  Vincent A. Handerek,et al.  A shear and vertical stress sensor for physiological measurements using fibre Bragg gratings , 2000, Proceedings of the 22nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (Cat. No.00CH37143).

[27]  Arezoo Eshraghi,et al.  Development and Validation of Fiber Bragg Grating Sensing Pad for Interface Pressure Measurements Within Prosthetic Sockets , 2016, IEEE Sensors Journal.

[28]  R.K. Begg,et al.  Design of MEMS biomedical pressure sensor for gait analysis , 2008, 2008 IEEE International Conference on Semiconductor Electronics.

[29]  Bruce W. Drinkwater,et al.  3D printed components with ultrasonically arranged microscale structure , 2016 .

[30]  Vincent A. Handerek,et al.  Development of a fiber Bragg grating sensor for in-shoe shear stress measurement: design and preliminary results , 2000, Symposium on Applied Photonics.

[31]  J. Dufek,et al.  Review of Foot Plantar Pressure—Focus on the Development of Foot Ulcerations , 2016 .

[32]  Kyriacos Kalli,et al.  Fiber Bragg Gratings: Fundamentals and Applications in Telecommunications and Sensing , 2000 .

[33]  Ryan B. Wicker,et al.  3D Printing for the Rapid Prototyping of Structural Electronics , 2014, IEEE Access.

[34]  Andrea Ehrmann,et al.  3D printed auxetic forms on knitted fabrics for adjustable permeability and mechanical properties , 2016 .