Coupled CFD, radiation and building energy model for studying heat fluxes in an urban environment with generic building configurations

Abstract In the past decades cities have been continuously growing. The microclimate in urban areas differs significantly from the microclimate in rural areas. The temperatures in urban areas are most of the time higher due to the urban heat island (UHI) effect and the wind speeds are lower due to wind sheltering. The local microclimate strongly influences the space cooling and heating demand of buildings and the human comfort and health in urban areas. The mechanisms causing the UHI effect have to be understood in detail to be able to improve the sustainability of (future) cities and the human comfort in urban areas. Wind driven ventilation is one of the most efficient ways of removing heat from urban areas. Knowledge of the heat fluxes caused by wind driven ventilation is important to be able to optimize the design of urban areas in terms of heat removal. The heat removal by wind and buoyancy can be increased by choosing optimal building geometries. In this study the urban heat fluxes are studied for six generic urban morphologies. Coupled CFD (computational fluid dynamics) and building energy simulations are conducted. This approach has the advantage of having highly spatially resolved temperature and flow fields and therefore being able of determining heat fluxes. Turbulent and convective heat fluxes are considered. The results show the importance of buoyancy for low wind speed cases and the strong influence of buildings upstream on the heat fluxes and temperatures further downstream.

[1]  C. S. B. Grimmond,et al.  Temporal variations in heat fluxes over a central European city centre , 2006 .

[2]  Ryuichiro Yoshie,et al.  Indices to evaluate ventilation efficiency in newly-built urban area at pedestrian level , 2013 .

[3]  Hamid Montazeri,et al.  CFD simulation and validation of urban microclimate: A case study for Bergpolder Zuid, Rotterdam , 2015 .

[4]  Michael Schatzmann,et al.  BUBBLE – an Urban Boundary Layer Meteorology Project , 2005 .

[5]  H. Mayer,et al.  Numerical study on the effects of aspect ratio and orientation of an urban street canyon on outdoor thermal comfort in hot and dry climate , 2006 .

[6]  D. Asimakopoulos.  Energy and Climate in the Urban Built Environment , 2001 .

[7]  Jan Carmeliet,et al.  Evaluation of the ventilation potential of courtyards and urban street canyons using RANS and LES , 2011 .

[8]  J. Michalsky,et al.  All-weather model for sky luminance distribution—Preliminary configuration and validation , 1993 .

[9]  M. Santamouris,et al.  On the impact of urban climate on the energy consumption of buildings , 2001 .

[10]  P. Richards,et al.  Appropriate boundary conditions for computational wind engineering models using the k-ε turbulence model , 1993 .

[11]  T. Stathopoulos,et al.  CFD simulation of the atmospheric boundary layer: wall function problems , 2007 .

[12]  Jörg Franke,et al.  The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: a summary , 2011 .

[13]  Darren Robinson,et al.  Computer Modelling for Sustainable Urban Design: Physical Principles, Methods and Applications , 2011 .

[14]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[15]  M. Kolokotroni,et al.  The London Heat Island: results from summertime monitoring , 2002 .

[16]  V. Dorer,et al.  An adaptive temperature wall function for mixed convective flows at exterior surfaces of buildings in street canyons , 2012 .

[17]  J. Carmeliet,et al.  Coupled CFD, radiation and porous media model for evaluating the micro-climate in an urban environment , 2014 .

[18]  R. Britter,et al.  Predicting velocities and turbulent momentum exchange in isolated street canyons , 2012 .

[19]  F. Haghighat,et al.  Approaches to study Urban Heat Island – Abilities and limitations , 2010 .

[20]  Christoph Schär,et al.  Future changes in daily summer temperature variability: driving processes and role for temperature extremes , 2009 .

[21]  Jan Carmeliet,et al.  Effect of flow unsteadiness on the mean wind flow pattern in an idealized urban environment , 2012 .

[22]  D. Lüthi,et al.  The role of increasing temperature variability in European summer heatwaves , 2004, Nature.

[23]  Mats Sandberg,et al.  City breathability and its link to pollutant concentration distribution within urban-like geometries , 2010 .

[24]  A. Arnfield.  Two decades of urban climate research: a review of turbulence, exchanges of energy and water, and the urban heat island , 2003 .

[25]  H. Timmermans,et al.  CFD analysis of transpirational cooling by vegetation: Case study for specific meteorological conditions during a heat wave in Arnhem, Netherlands , 2015 .

[26]  K. Allwine,et al.  Joint Urban 2003: Study Overview And Instrument Locations , 2006 .

[27]  V. Dorer,et al.  Influence of morphologies on the microclimate in urban neighbourhoods , 2015 .

[28]  J. Monteith,et al.  Boundary Layer Climates. , 1979 .

[29]  V. Dorer,et al.  Urban Physics: Effect of the micro-climate on comfort, health and energy demand , 2012 .

[30]  Yoshihide Tominaga,et al.  AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings , 2008 .

[31]  Martin Tenpierik,et al.  Outdoor thermal comfort within five different urban forms in the Netherlands , 2015 .

[32]  D. Robinson,et al.  Internal illumination prediction based on a simplified radiosity algorithm , 2006 .

[33]  Jonas Allegrini,et al.  Buoyant flows in street canyons: Validation of CFD simulations with wind tunnel measurements , 2014 .

[34]  Jérôme Henri Kämpf,et al.  On the modelling and optimisation of urban energy fluxes , 2009 .