Importance of ‘unimportant’ experimental parameters in Li–S battery development

Abstract Lithium–sulphur batteries are among the most promising systems for the next generation of rechargeable lithium batteries. Whereas a wide range of factors contribute to the overall performance of the Li–S system, reported optimization procedures typically focus on the development of novel structured cathodes. Here, the importance of often-neglected experimental parameters contributing to the performance of Li–S systems is demonstrated. Specifically, the effects of varying the amount of electrolyte, the salt concentration and the type of electrolyte additive are presented and factors that improve cycling stability are discussed. Some of the parameters, such as sulphur-particle size and the type of conductive additive used in the electrodes, affected the cell's performance less than might be expected. Long-term cycling (up to 500 cycles) with a low amount of electrolyte is demonstrated. Our results suggest that parameters related to the electrolyte are more important for improving the overall performance than those concerning the electrode structure.

[1]  Shizhao Xiong,et al.  Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium–sulfur batteries , 2012 .

[2]  Yi Cui,et al.  Improving the performance of lithium-sulfur batteries by conductive polymer coating. , 2011, ACS nano.

[3]  Jason Xu,et al.  High Energy Rechargeable Li-S Cells for EV Application: Status, Remaining Problems and Solutions , 2010 .

[4]  Petr Novák,et al.  Influence of different electrode compositions and binder materials on the performance of lithium–sulfur batteries , 2012 .

[5]  Lixia Yuan,et al.  Dual core–shell structured sulfur cathode composite synthesized by a one-pot route for lithium sulfur batteries , 2013 .

[6]  Linda F. Nazar,et al.  Surface‐Initiated Growth of Thin Oxide Coatings for Li–Sulfur Battery Cathodes , 2012 .

[7]  Doron Aurbach,et al.  On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries , 2009 .

[8]  L. Nazar,et al.  New approaches for high energy density lithium-sulfur battery cathodes. , 2013, Accounts of chemical research.

[9]  L. Nazar,et al.  Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium-sulfur batteries. , 2012, Angewandte Chemie.

[10]  L. Nazar,et al.  Graphene-enveloped sulfur in a one pot reaction: a cathode with good coulombic efficiency and high practical sulfur content. , 2012, Chemical communications.

[11]  J. L. Gómez‐Cámer,et al.  Anchoring Si nanoparticles to carbon nanofibers: an efficient procedure for improving Si performance in Li batteries , 2011 .

[12]  Doron Aurbach,et al.  Sulfur‐Impregnated Activated Carbon Fiber Cloth as a Binder‐Free Cathode for Rechargeable Li‐S Batteries , 2011, Advanced materials.

[13]  X. Tao,et al.  Highly mesoporous carbon foams synthesized by a facile, cost-effective and template-free Pechini method for advanced lithium–sulfur batteries , 2013 .

[14]  W. Cho,et al.  Polysulfide dissolution control: the common ion effect. , 2013, Chemical communications.

[15]  Shengdi Zhang.  Role of LiNO3 in rechargeable lithium/sulfur battery , 2012 .

[16]  D. J. Walsh,et al.  Interaction of poly(ethylene oxide) with solvents: 1. Preparation and swelling of a crosslinked poly(ethylene oxide) hydrogel , 1982 .

[17]  Guangyuan Zheng,et al.  Nanostructured sulfur cathodes. , 2013, Chemical Society reviews.

[18]  Jun Liu,et al.  A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium‐Sulfur Batteries with Long Cycle Life , 2012, Advanced materials.

[19]  L. Nazar,et al.  Advances in Li–S batteries , 2010 .

[20]  Xiaogang Zhang,et al.  Encapsulating sulfur into hierarchically ordered porous carbon as a high-performance cathode for lithium-sulfur batteries. , 2013, Chemistry.

[21]  H. Dai,et al.  Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.

[22]  Guangyuan Zheng,et al.  Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries , 2013, Nature Communications.