Interactive power flow characteristics of an integrated equipment—nonlinear isolator—travelling flexible ship excited by sea waves

A nonlinear interactive system comprising of equipment, nonlinear isolator and travelling flexible ship excited by waves is studied from a vibratory power flow viewpoint to examine its dynamical behaviour and power flow characteristics. The mathematical model describing the dynamics of this nonlinear interactive system is developed. Dynamical interactions between equipment, nonlinear isolator, flexible foundation and water waves are addressed. The nonlinearities of the isolator are characterized by a general pth power model for damping and qth power for stiffness. A harmonic balance method is adopted to derive the steady-state harmonic response of the nonlinear system. A Newton–Raphson iteration process in association with an efficient numerical algorithm is used to obtain the solutions of this nonlinear problem. Through simulations the dynamical behaviour, power flow characteristics and isolation efficiency of this complex nonlinear interaction system are investigated. For different values of power p and q, different wave excitations and flexible or rigid ship, the power transmitted to the equipment and power flow transmission ratios are calculated and analysed. The effect of the vibration source with different wave conditions of the seaway is studied through examining its vibratory power input to the overall system. The effects of the assumptions of flexible or rigid ship, the nonlinearities on the power flows in the system are examined. Nonlinear power flow phenomena and mechanisms are revealed, which provides an insight to the understanding of power flow characteristics in nonlinear systems. Practical guidelines for the design of vibration isolation systems applicable to maritime engineering are suggested.

[1]  R. Bishop,et al.  A general linear hydroelasticity theory of floating structures moving in a seaway , 1986, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[2]  W. G. Price,et al.  A power–flow analysis based on continuum dynamics , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[3]  Rajendra Singh,et al.  Nonlinear Analysis of Automotive Hydraulic Engine Mount , 1993 .

[4]  Sayed M. Metwalli Optimum Nonlinear Suspension Systems , 1986 .

[5]  E. E. Ungar,et al.  High-frequency vibration isolation , 1966 .

[6]  J. I. Soliman,et al.  Vibration isolation between non-rigid machines and non-rigid foundations , 1968 .

[7]  W. Price,et al.  POWER FLOW ANALYSIS OF COMPLEX COUPLED SYSTEMS BY PROGRESSIVE APPROACHES , 2001 .

[8]  K. Y. Lam,et al.  DESIGN OPTIMIZATION OF MARINE ENGINE-MOUNT SYSTEM , 2000 .

[9]  Seshadri Sankar,et al.  Modelling and analysis of non-linear orifice type damping in vibration isolators , 1995 .

[10]  Michael J. Brennan,et al.  Strategies for the active control of flexural vibration on a beam , 1995 .

[11]  W. Press,et al.  Numerical Recipes: The Art of Scientific Computing , 1987 .

[12]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[13]  J. Plunt,et al.  On effective mobilities in the prediction of structure-borne sound transmission between a source structure and a receiving structure, part I: Theoretical background and basic experimental studies , 1982 .

[14]  Jing Tang Xing,et al.  A general linear mathematical model of power flow analysis and control for integrated structure-control systems , 2003 .

[15]  R. G. White,et al.  Analysis and control of vibrational power transmission to machinery supporting structures subjected to a multi-excitation system, Part I: Driving point mobility matrix of beams and rectangular plates , 1996 .

[16]  J. Feldmann The noise behavior of the wheel/rail-system— some supplementary results , 1983 .

[17]  H. Hatwal,et al.  ON THE MODELLING OF NON-LINEAR ELASTOMERIC VIBRATION ISOLATORS , 1999 .

[18]  Thomas J. Royston,et al.  Vibratory power flow through a nonlinear path into a resonant receiver , 1996 .

[19]  R. J. Pinnington,et al.  Power flow through machine isolators to resonant and non-resonant beams , 1981 .

[20]  Yeping Xiong,et al.  Optimum control of vibration and structure-borne noise for machinery on flexible foundation , 1996 .

[21]  Colin H. Hansen,et al.  Total power flow from a vibrating rigid body to a thin panel through multiple elastic mounts , 1992 .

[22]  R. Benamar,et al.  a Semi-Analytical Approach to the Non-Linear Dynamic Response Problem of Beams at Large Vibration Amplitudes, Part II: Multimode Approach to the Steady State Forced Periodic Response , 2002 .

[23]  Daniel J. Inman,et al.  ISOLATION DESIGN FOR A FLEXIBLE SYSTEM , 1998 .

[24]  W. G. Price,et al.  Hybrid active and passive control of vibratory power flow in flexible isolation system , 2000 .

[25]  Cyril M. Harris,et al.  Shock and vibration handbook , 1976 .

[26]  Colin H. Hansen,et al.  Active control of power flow from a vibrating rigid body to a flexible panel through two active isolators , 1993 .

[27]  N. Chandra Shekhar,et al.  PERFORMANCE OF NON-LINEAR ISOLATORS AND ABSORBERS TO SHOCK EXCITATIONS , 1999 .

[28]  Stephen J. Elliott,et al.  Passive and active isolation of structural vibration transmission between two plates connected by a set of mounts , 2000 .

[29]  W. G. Price,et al.  Hydroelasticity of Ships , 1980 .

[30]  A. K. Mallik,et al.  Performance of Non-linear Vibration Isolators Under Harmonic Excitation , 1994 .

[31]  W. Thomson Theory of vibration with applications , 1965 .

[32]  Irene A. Stegun,et al.  Handbook of Mathematical Functions. , 1966 .

[33]  Xiong Yepin Power flow in the coupled dynamic system of machinery and building floor , 1996 .

[34]  J. M. Cuschieri,et al.  Structural power‐flow analysis using a mobility approach of an L‐shaped plate , 1990 .

[35]  Sotirios Natsiavas,et al.  ON VIBRATION ISOLATION OF MECHANICAL SYSTEMS WITH NON-LINEAR FOUNDATIONS , 1996 .

[36]  G. Kim,et al.  A study of passive and adaptive hydraulic engine mount systems with emphasis on non-linear characteristics , 1995 .

[37]  R. G. White,et al.  Vibrational power flow from machines into built-up structures, part I: Introduction and approximate analyses of beam and plate-like foundations , 1980 .

[38]  Thomas J. Royston,et al.  OPTIMIZATION OF PASSIVE AND ACTIVE NON-LINEAR VIBRATION MOUNTING SYSTEMS BASED ON VIBRATORY POWER TRANSMISSION , 1996 .

[39]  C. Crede Vibration and shock isolation , 1951 .

[40]  B. Noble Applied Linear Algebra , 1969 .