The effects of various annealing regimes on the microstructure and physical properties of ITO (In2O3:Sn) thin films deposited by electron beam evaporation for solar energy applications

The goal of this study has been to investigate the influence of various post-deposition heat treatments on the microstructure, electrical and optical properties of In2O3:Sn (ITO) thin films deposited by electron beam evaporation. We have shown that electron beam evaporated ITO thin films deposited onto substrates kept upto 150 °C, have poor electrical properties and low optical transmission in the visible range, due to their amorphous structure. As the microstructure changes from amorphous to polycrystalline it was observed that the film resistivity decreases and it is simultaneously related to an improvement in the optical transmission. From comparisons of several annealing processes it has been observed that oxygen plays an important role in doping as well as the presence of Sn in the target material. Furthermore we have shown that high quality ITO thin films can be reproducibly prepared with optical transmission being enhanced by an annealing in air and the electrical characteristics being improved by a further annealing in a reducing atmosphere. Superior electrical and optical properties could be correlated with annealed films that exhibited a cubic bixbyte structure and large crystallite dimensions larger than 50 nm.

[1]  M. G. Walls,et al.  A comparative study of microstructure (in ITO films) and techniques (CTEM and STM) , 1991 .

[2]  J. Toušková,et al.  Sputtered indium-tin oxide substrates for CdSCdTe solar cells , 1995 .

[3]  C. Granqvist,et al.  Transparent and conducting ITO films: new developments and applications , 2002 .

[4]  C. Guillén,et al.  Comparison study of ITO thin films deposited by sputtering at room temperature onto polymer and glass substrates , 2005 .

[5]  C. Chung,et al.  Radio frequency magnetron sputter-deposited indium tin oxide for use as a cathode in transparent organic light-emitting diode , 2005 .

[6]  I. Hamberg,et al.  Evaporated Sn‐doped In2O3 films: Basic optical properties and applications to energy‐efficient windows , 1986 .

[7]  M. P. D. Santos,et al.  Structure effect on electrical properties of ITO films prepared by RF reactive magnetron sputtering , 1996 .

[8]  C. Daube,et al.  Dependence of oxygen flow on optical and electrical properties of DC-magnetron sputtered ITO films , 1998 .

[9]  Andreas Hangleiter,et al.  Investigations on oxygen diffusion in annealing processes of non-stoichiometric amorphous indium tin oxide thin films , 2006 .

[10]  A. Diniz,et al.  Crystallisation of indium-tin-oxide (ITO) thin films , 2004 .

[11]  Tianmin Wang,et al.  EFFECTS OF HEAT TREATMENT ON PROPERTIES OF ITO FILMS PREPARED BY RF MAGNETRON SPUTTERING , 2004 .

[12]  D. Paine,et al.  A study of the effect of process oxygen on stress evolution in d.c. magnetron-deposited tin-doped indium oxide , 2002 .

[13]  Huasong Peng,et al.  Indium tin oxide thin films by bias magnetron rf sputtering for heterojunction solar cells application , 2005 .

[14]  T. Hino,et al.  Preparation of functionalized and non-functionalized fullerene thin films on ITO glasses and the application to a counter electrode in a dye-sensitized solar cell , 2006 .