Synthesis and characterization of fly ash modified mine tailings-based geopolymers

Abstract Each year, the mining industry generates a significant amount of mine tailings. Storage of these tailings occupies large areas of land and leads to high monetary, environmental and ecological costs. In this research, a feasibility study is performed on geopolymerization of mine tailings so that they can be recycled and utilized as construction material. Considering the extremely high silicon to aluminum (Si/Al) ratio for the mine tailings, class F fly ash is used to adjust the Si/Al ratio. Sodium hydroxide (NaOH) solution is used as the alkaline reaction agent. The research consists of unconfined compression tests to evaluate the mechanical properties, scanning electron microscopy (SEM) imaging to investigate the microstructure, and the X-ray diffraction (XRD) analysis to study the phase compositions. The effects of fly ash content (which affects the Si/Al ratio), alkalinity (NaOH concentration), and curing time on the geopolymerization of mine tailings are studied in a systematic way. The results show that the Si/Al ratio and the alkalinity have profound effects on the mechanical and micro-structural properties of the mine tailings-based geopolymers. The curing time affects the mechanical and micro-structural properties of the mine tailings-based geopolymers mainly during the first 7 days. Based on the research, it can be concluded that mine tailings are a viable and promising construction material if the geopolymerization technology is utilized.

[1]  Wen-fang Zhou,et al.  Effect of activator and curing mode on fly ash-based geopolymers , 2009 .

[2]  J.S.J. van Deventer,et al.  THE EFFECT OF COMPOSITION AND TEMPERATURE ON THE PROPERTIES OF FLY ASH- AND KAOLINITE -BASED GEOPOLYMERS , 2002 .

[3]  J. Temuujin,et al.  Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes. , 2009, Journal of hazardous materials.

[4]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[5]  Pacheco-Torgal Fernando,et al.  Durability and Environmental Performance of Alkali-Activated Tungsten Mine Waste Mud Mortars , 2010 .

[6]  Rubina Chaudhary,et al.  Mechanism of geopolymerization and factors influencing its development: a review , 2007 .

[7]  Paul F. Ziemkiewicz,et al.  Acid mine drainage control and treatment. , 2000 .

[8]  Waltraud M. Kriven,et al.  The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers , 2007 .

[9]  Prinya Chindaprasirt,et al.  Influence of NaOH solution on the synthesis of fly ash geopolymer , 2009 .

[10]  Robert D. Holtz,et al.  Geotechnical Earthquake Engineering and Soil Dynamics III , 1998 .

[11]  F. Pacheco-Torgal,et al.  Investigations of tungsten mine waste geopolymeric binder: Strength and microstructure , 2008 .

[12]  Fernando Pacheco-Torgal,et al.  Properties of tungsten mine waste geopolymeric binder , 2008 .

[13]  S. Alonso,et al.  Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio , 2001 .

[14]  Hua Xu,et al.  Effect of Source Materials on Geopolymerization , 2003 .

[15]  M. Monroy-Fernández,et al.  Acid rock drainage and metal leaching from mine waste material (tailings) of a Pb-Zn-Ag skarn deposit: environmental assessment through static and kinetic laboratory tests , 2007 .

[16]  Glykeria Kakali,et al.  Dissolution of aluminosilicate minerals and by-products in alkaline media , 2007 .

[17]  B. Vijaya Rangan,et al.  ON THE DEVELOPMENT OF FLY ASH-BASED GEOPOLYMER CONCRETE , 2004 .

[18]  S. Alonso,et al.  Calorimetric study of alkaline activation of calcium hydroxide–metakaolin solid mixtures , 2001 .

[19]  J. Davidovits.  Geopolymers : inorganic polymeric new materials , 1991 .

[20]  Behzad Majidi,et al.  Geopolymer technology, from fundamentals to advanced applications: a review , 2009 .

[21]  T. Cheng,et al.  Fire-resistant geopolymer produced by granulated blast furnace slag , 2003 .

[22]  Dimitrios Panias,et al.  Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology , 2009 .

[23]  J. Provis.  Modelling the formation of geopolymers , 2006 .

[24]  M. Blanco-Varela,et al.  Alkaline Activation of Metakaolin: Effect of Calcium Hydroxide in the Products of Reaction , 2004 .

[25]  E. Kamseu,et al.  Geopolymer Development by Powders of Metakaolin and Wastes in Thailand , 2010 .

[26]  Alejandro Manzano-Ramírez,et al.  The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer , 2011 .

[27]  F. Pacheco-Torgal,et al.  Tungsten mine waste geopolymeric binder: Preliminary hydration products investigations , 2009 .

[28]  Hassan A Sultan.  STABILIZED COPPER MILL TAILINGS FOR HIGHWAY CONSTRUCTION , 1979 .

[29]  J. Deventer,et al.  The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation , 2005 .

[30]  J. Deventer,et al.  Geopolymers : structure, processing, properties and industrial applications , 2009 .

[31]  K. Sagoe-Crentsil,et al.  Relationships between composition, structure and strength of inorganic polymers , 2005 .

[32]  Wei Wang,et al.  The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer. , 2010, Chemosphere.

[33]  V. Sirivivatnanon,et al.  Kinetics of geopolymerization: Role of Al2O3 and SiO2 , 2007 .

[34]  Ángel Palomo,et al.  Alkali-activated fly ashes: A cement for the future , 1999 .

[35]  J.S.J. van Deventer,et al.  The effect of metal contaminants on the formation and properties of waste-based geopolymers , 1999 .

[36]  J. Deventer,et al.  Understanding the relationship between geopolymer composition, microstructure and mechanical properties , 2005 .

[37]  Brian H. O'Connor,et al.  Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite , 2003 .

[38]  K. Sagoe-Crentsil,et al.  Relationships between composition, structure and strength of inorganic polymers , 2005 .

[39]  K. Komnitsas,et al.  Utilisation of low-calcium slags to improve the strength and durability of geopolymers , 2009 .

[40]  Warren A. Dick,et al.  Compressive strength and microstructural characteristics of class C fly ash geopolymer , 2010 .

[41]  E. Allouche,et al.  Factors affecting the suitability of fly ash as source material for geopolymers , 2010 .