Approximate Method for Transverse Response Analysis of Partially Isolated Bridges

Current analysis procedures for seismically isolated bridges frequently use an equivalent (approximate) linearization approach to represent the response of nonlinear isolation/energy dissipation devices. Linearization allows standard linear elastic analysis methods, e.g., the response spectrum method, to be conveniently used for design purposes. The linearization approach is by nature an iterative method implying the need to repeatedly correct and analyze a numerical finite-element model. A further simplification could be achieved using closed form equations to represent (1) the structure displacement patterns and (2) the restoring forces from structural elements. The paper explores such a possibility with reference to partially isolated continuous bridges, i.e., bridges with isolation devices at piers and pinned supports at abutments. The role and effect of higher modes of vibration on the system response are discussed, and an approximate method is proposed to account for such effects. An improvement of the classical Jacobsen’s approximation for the effective viscous damping ratio is also proposed using the results of response history analyses. The latter are carried out on two-dimensional numerical models of five case studies, generated from a real existing bridge supposed to be isolated with friction pendulum devices. Comparison of approximate predictions with response history analysis results is presented and discussed. Nonlinear dynamic analyses of a three-dimensional numerical model of the existing bridge were also carried out for comparison purposes.

[1]  J. Mander,et al.  Theoretical stress strain model for confined concrete , 1988 .

[2]  F. Charney.  Unintended Consequences of Modeling Damping in Structures , 2008 .

[3]  Arnold Verruijt,et al.  Beams on Elastic Foundation , 1995 .

[4]  Lawrence L. Kupper,et al.  Probability, statistics, and decision for civil engineers , 1970 .

[5]  Andrea Dall'Asta,et al.  A design method for seismically isolated bridges with abutment restraint , 2011 .

[6]  Anil K. Chopra,et al.  A modal pushover analysis procedure for estimating seismic demands for buildings , 2002 .

[7]  Renato Giannini,et al.  An experimental and numerical investigation on the cyclic response of a portal frame pier belonging to an old reinforced concrete viaduct , 2012 .

[8]  Mervyn J. Kowalsky,et al.  Displacement-based seismic design of structures , 2007 .

[9]  Gian Michele Calvi,et al.  Displacement Reduction Factors for the Design of Medium and Long Period Structures , 2011 .

[10]  A. Kiureghian.  A response spectrum method for random vibration analysis of mdf systems , 1981 .

[11]  Murat Dicleli,et al.  Seismic retrofitting of highway bridges in Illinois using friction pendulum seismic isolation bearings and modeling procedures , 2003 .

[12]  Murat Dicleli,et al.  Improved Effective Damping Equation for Equivalent Linear Analysis of Seismic-Isolated Bridges , 2006 .

[13]  M. J. N. Priestley,et al.  EQUIVALENT VISCOUS DAMPING EQUATIONS FOR DIRECT DISPLACEMENT BASED DESIGN , 2005 .

[14]  Nicos Makris,et al.  The eigenvalues of isolated bridges with transverse restraints at the end abutments , 2009 .

[15]  Meng-Hao Tsai.  Transverse earthquake response analysis of a seismically isolated regular bridge with partial restraint , 2008 .

[16]  Andrew S. Whittaker,et al.  Characterization and Modeling of Friction Pendulum Bearings Subjected to Multiple Components of Excitation , 2004 .