A Robotic Cell for Multi-Resolution Additive Manufacturing
暂无分享,去创建一个
Satyandra K. Gupta | Ariyan M. Kabir | Prahar M. Bhatt | Rishi K. Malhan | Brual C. Shah | Aniruddha V. Shembekar | Yeo Jung Yoon | Brual Shah | Satyandra K. Gupta | R. Malhan | P. Bhatt | S. Gupta | A. Kabir | A. Shembekar
[1] Jeremy A. Marvel,et al. Planning algorithms for multi-setup multi-pass robotic cleaning with oscillatory moving tools , 2016, 2016 IEEE International Conference on Automation Science and Engineering (CASE).
[2] Ronald F. Gibson,et al. A review of recent research on mechanics of multifunctional composite materials and structures , 2010 .
[3] Chen Shen,et al. Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part , 2016, Comput. Aided Des..
[4] Wenlei Xiao,et al. Nonplanar slicing and path generation methods for robotic additive manufacturing , 2018 .
[5] Henrik Gordon Petersen,et al. Task curve planning for painting robots. I. Process modeling and calibration , 1996, IEEE Trans. Robotics Autom..
[6] Mohsen A. Jafari,et al. A novel system for fused deposition of advanced multiple ceramics , 2000 .
[7] Hugh A. Bruck,et al. Robot Assisted Additive Manufacturing of Thin Multifunctional Structures , 2018, Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing.
[8] Ian Campbell,et al. Additive manufacturing: rapid prototyping comes of age , 2012 .
[9] F. Martina,et al. Design for Additive Manufacturing , 2019 .
[10] P. Dudek,et al. FDM 3D Printing Technology in Manufacturing Composite Elements , 2013 .
[11] Thomas Maier,et al. Workpiece and Machine Design in Additive Manufacturing for Multi-Axis Fused Deposition Modeling☆ , 2017 .
[12] Carlos Martínez,et al. Robotic additive manufacturing along curved surface — A step towards free-form fabrication , 2015, 2015 IEEE International Conference on Robotics and Biomimetics (ROBIO).
[13] Olaf Diegel,et al. Modeling and evaluation of curved layer fused deposition , 2012 .
[14] N. Léchevin,et al. Principles of Composite Material Mechanics – Third edition , 2012 .
[15] Satyandra K. Gupta,et al. Context-Dependent Compensation Scheme to Reduce Trajectory Execution Errors for Industrial Manipulators , 2019, 2019 International Conference on Robotics and Automation (ICRA).
[16] Charlie C. L. Wang,et al. The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..
[17] Satyandra K. Gupta,et al. Computational Foundations for Using Three Degrees of Freedom Build Platforms to Enable Supportless Extrusion-Based Additive Manufacturing , 2019, Volume 1: Additive Manufacturing; Manufacturing Equipment and Systems; Bio and Sustainable Manufacturing.
[18] Levi D. DeVries,et al. Testbed for Multilayer Conformal Additive Manufacturing , 2017 .
[19] Satyandra K. Gupta,et al. Trajectory Planning for Conformal 3D Printing Using Non-Planar Layers , 2018 .
[20] Q. Ye. The signed Euclidean distance transform and its applications , 1988, [1988 Proceedings] 9th International Conference on Pattern Recognition.
[21] Satyandra K. Gupta,et al. Generation of Synchronized Configuration Space Trajectories of Multi-Robot Systems , 2019, 2019 International Conference on Robotics and Automation (ICRA).
[22] Wojciech Matusik,et al. OpenFab , 2013, ACM Trans. Graph..
[23] Brian Mellor,et al. Multiple material additive manufacturing – Part 1: a review , 2013 .
[24] Vijay Chandru,et al. Voxel-based modeling for layered manufacturing , 1995, IEEE Computer Graphics and Applications.
[25] Satyandra K. Gupta,et al. Generating Robot Trajectories for Conformal Three-Dimensional Printing Using Nonplanar Layers , 2019, J. Comput. Inf. Sci. Eng..
[26] Timotei Centea,et al. Enhancing Mechanical Properties of Thin-Walled Structures Using Non-Planar Extrusion Based Additive Manufacturing , 2017 .
[27] W. Cong,et al. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .
[28] Bin Huang,et al. Curved Layer Adaptive Slicing (CLAS) for fused deposition modelling , 2015 .
[29] David Espalin,et al. Multi-material, multi-technology FDM: exploring build process variations , 2014 .
[30] Ching-chih Wei,et al. Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining , 2014 .
[31] Xuan Song,et al. Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing , 2015 .
[32] David W. Rosen,et al. Design for Additive Manufacturing , 2015, Additive Manufacturing Technologies.
[33] Krishnanand N. Kaipa,et al. Automated Planning for Robotic Cleaning Using Multiple Setups and Oscillatory Tool Motions , 2017, IEEE Transactions on Automation Science and Engineering.
[34] P. D. Mangalgiri. Composite materials for aerospace applications , 1999 .
[35] Jan Helge Bøhn,et al. Accurate exterior, fast interior layered manufacturing , 1997 .
[36] Yixin Yan,et al. Welding Robot Collision-Free Path Optimization , 2017 .
[37] Allan J. Lightman,et al. Development of a curved layer LOM process for monolithic ceramics and ceramic matrix composites , 1999 .
[38] Hugh A. Bruck,et al. A robotic cell for performing sheet lamination-based additive manufacturing , 2019, Additive Manufacturing.
[39] Neri Oxman,et al. Compound fabrication: A multi-functional robotic platform for digital design and fabrication , 2013 .
[40] Gregory S. Chirikjian,et al. Algorithms for Multilayer Conformal Additive Manufacturing , 2015 .
[41] Dominic Cuiuri,et al. Adaptive path planning for wire-feed additive manufacturing using medial axis transformation , 2016 .
[42] P. Senthil,et al. Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process , 2018 .
[43] Johan Potgieter,et al. Robot-assisted 3D printing of biopolymer thin shells , 2017 .
[44] Fernando Fraternali,et al. Investigation for surface finish improvement of FDM parts by vapor smoothing process , 2017 .
[45] Yifan Chen,et al. Automated robot trajectory planning for spray painting of free-form surfaces in automotive manufacturing , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).
[46] Adedeji Aremu,et al. A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing , 2017 .