Eight MPD thruster configurations were used to study the effects of applied-field strength, propellant, and facility pressure on thruster performance. Vacuum facility background pressures higher than about 0.12 Pa were found to significantly influence thruster performance and electrode power deposition. Thrust efficiency and specific impulse increased monotonically with increasing applied field strength. Both cathode and anode radii fundamentally influenced the efficiency-specific impulse relationship, while their lengths influenced only the magnitude of the applied magnetic field required to reach a given performance level. At a given specific impulse, large electrode radii result in lower efficiencies for the operating conditions studied. For all test conditions, anode power deposition was the largest efficiency loss, and represented between 50 percent and 80 percent of the input power. The fraction of the input power deposited into the anode decreased with increasing applied field and anode radius. The highest performance measured, 20 percent efficiency at 3700 seconds specific impulse, was obtained using hydrogen propellant.
[1]
Roger M. Myers,et al.
Geometric effects in applied-field MPD thrusters
,
1990
.
[2]
James S. Sovey,et al.
Performance and lifetime assessment of MPD arc thruster technology
,
1988
.
[3]
T. Yoshikawa,et al.
Quasi-steady MPD arcjets with applied magnetic fields
,
1985
.
[4]
Thomas W. Haag,et al.
Design of a thrust stand for high power electric propulsion devices
,
1989
.
[5]
R. Jahn,et al.
Anode power deposition in quasi-steady MPD arcs. [accelerator anode heat flux measurement]
,
1973
.
[6]
M. Williams,et al.
Experiments using a 25-kw hollow cathode lithium vapor MPD arcjet
,
1969
.
[7]
James S. Sovey,et al.
Performance and lifetime assessment of magnetoplasmadynamic arc thruster technology
,
1991
.
[8]
Hirokazu Tahara,et al.
Development of a quasi-steady MPD arcjet thruster for near-earth missions
,
1987
.